KOORUI 32 inch 4K Computer Monitor User Manual

1. Introduktion

Thank you for choosing the KOORUI 32 inch 4K Computer Monitor. This manual provides essential information for setting up, operating, and maintaining your monitor. Please read it thoroughly before use to ensure optimal performance and longevity of your device.

2. Hvad er der i æsken

Bekræft at alle komponenter er til stede i pakken:

• KOORUI 32 inch 4K Monitor
• Monitorstativ (base og hals)
• AC Power Cable with Adapter
• HDMI 2.0-kabel
• Brugervejledning (dette dokument)

3. Opsætningsvejledning

3.1 Samling af stativet

1. Placer forsigtigt skærmen med forsiden nedad på en blød, ren overflade for at undgå ridser.
2. Attach the stand neck to the monitor's rear panel. Ensure it clicks securely into place or is fastened with screws if provided.
3. Connect the stand base to the stand neck, securing it with the thumb screw or screws provided.

3.2 VESA-montering (valgfrit)

The monitor supports VESA 100x100mm mounting. If using a VESA mount, remove the stand neck and attach your VESA-compatible bracket to the monitor's rear panel using appropriate screws.

Figure 3.2.1: Monitor dimensions and VESA mounting points (100x100mm).

3.3 Tilslutningskabler

1. Connect the AC power adapter to the monitor's DC input port and then plug the power cable into a power outlet.
2. Connect the HDMI cable from your computer's HDMI output to one of the monitor's HDMI 2.0 ports. Alternatively, use a DisplayPort cable to connect to the monitor's DisplayPort 1.4.
3. If desired, connect external speakers or headphones to the Audio Out port.

Figure 3.3.1: Rear connectivity panel with labeled ports (HDMI 2.0 x2, DisplayPort 1.4, Audio Out, DC Power).

4. Betjeningsvejledning

4.1 Tænd/sluk

Press the power button, typically located on the back or bottom of the monitor, to turn the monitor on or off. The power indicator light will illuminate when the monitor is on.

4.2 Using the OSD Menu (On-Screen Display)

The monitor features an intuitive joystick control for navigating the OSD menu. The joystick is usually located on the back of the monitor.

• Tryk på joysticket: Aktiverer OSD-menuen.
• Flyt joysticket op/ned: Navigerer gennem menupunkter.
• Flyt joysticket til venstre/højre: Adjusts selected settings or moves to sub-menus.
• Tryk på joysticket igen: Bekræfter valg eller afslutter en undermenu.

4.3 Justering af indstillinger

Through the OSD menu, you can adjust various display settings:

• Lysstyrke/kontrast: Juster den samlede luminans og forskellen mellem lyse og mørke områder.
• Farveindstillinger: Rediger farvetemperatur, farvetone og mætning.
• Inputkilde: Manually select between HDMI 1, HDMI 2, or DisplayPort inputs.
• Billedtilstande: Select from preset modes optimized for different content (e.g., Standard, Game, Movie, Text).
• Lyd: Adjust volume for built-in speakers or connected audio devices.

Figure 4.3.1: User interacting with the monitor in a typical work environment.

5. Skærmfunktioner

The KOORUI 32 inch 4K Monitor offers advanced display technologies for a superior visual experience:

• 4K UHD-opløsning: Experience stunning clarity with a 3840 x 2160 pixel resolution, providing ample screen space and sharp details.

Figure 5.1.1: The monitor's 4K UHD resolution for detailed visuals.

• High Contrast VA Panel: A VA panel with a 3500:1 static contrast ratio delivers deep blacks and bright whites for enhanced visual depth.

Figure 5.1.2: High contrast ratio for deeper blacks and better detail.

• Vivid & Accurate Colors: With 99% sRGB, 95% DCI-P3 color gamut, and 10-bit color depth (1.07 billion colors), the monitor provides true-to-life color reproduction.

Figure 5.1.3: Wide color gamut and 10-bit color for vivid and accurate visuals.

• HDR Support & Gamma 2.4: High Dynamic Range (HDR) support combined with Gamma 2.4 enhances contrast and shadow detail, providing a more immersive viewoplevelse.

Figure 5.1.4: HDR support and Gamma 2.4 for improved contrast and shadow detail.

• Adaptiv synkroniseringsteknologi: Compatible with FreeSync and G-Sync, this technology synchronizes the monitor's refresh rate with your GPU's frame rate to eliminate screen tearing and stuttering.

Figure 5.1.5: Game mode and preset options, including Adaptive Sync compatibility.

• Øjenplejetilstand: Built-in eye care mode adjusts color temperature to reduce eye strain during prolonged viewing sessioner.

Figure 5.1.6: Eye care mode for reduced eye strain.

6. Vedligeholdelse

6.1 Rengøring af monitoren

• Sluk altid skærmen og tag netledningen ud, inden rengøring.
• Brug let en blød, fnugfri klud damprengøres med vand eller et ikke-slibende skærmrensemiddel.
• Sprøjt ikke rengøringsmiddel direkte på skærmen. Påfør det først på kluden.
• Undgå at bruge benzen, fortynder, ammoniakbaserede rengøringsmidler eller slibende materialer, da disse kan beskadige skærmen ellerasing.

6.2 Generel pleje

• Keep the monitor away from direct sunlight, excessive heat, or humidity.
• Sørg for korrekt ventilation omkring skærmen for at forhindre overophedning.
• Undgå at placere tunge genstande på skærmen eller dens kabler.

7. Fejlfinding

Hvis du støder på problemer med din skærm, kan du se følgende almindelige problemer og løsninger:

7.1 Ingen strøm

• Sørg for, at strømkablet er tilsluttet korrekt til både skærmen og en fungerende stikkontakt.
• Check if the power adapter is properly connected to the monitor.
• Kontroller, at stikkontakten fungerer ved at tilslutte en anden enhed.

7.2 Intet signal

• Confirm that the video cable (HDMI or DisplayPort) is securely connected to both the monitor and your computer.
• Sørg for, at din computer er tændt og ikke i dvaletilstand.
• Use the OSD menu to manually select the correct input source (HDMI 1, HDMI 2, or DisplayPort).
• Try a different video cable or port on your computer/monitor to rule out a faulty connection.

7.3 Display Problems (e.g., flickering, distorted image)

• Kontroller videokablet for skader eller løse forbindelser.
• Adjust the resolution and refresh rate settings on your computer to match the monitor's specifications (3840x2160 at 60Hz).
• Opdater dine grafikkortdrivere til den nyeste version.
• Perform a factory reset through the OSD menu if the issue persists.

8. Specifikationer

Detailed technical specifications for the KOORUI 32 inch 4K Computer Monitor (Model E3241A):

9. Garanti og support

KOORUI products are designed for reliability and performance. This monitor comes with a standard manufacturer's warranty. For specific warranty terms, registration, or technical support, please refer to the warranty card included in your package or visit the official KOORUI webwebsted.

For further assistance, please contact KOORUI customer service.