Indledning
This manual provides detailed instructions for the installation, operation, and maintenance of your ASD LED Motion Sensor Outdoor Flood Light, Model A-SFL-20BK. This advanced outdoor lighting solution features a 180° motion sensor, multiple lighting modes, adjustable color temperature, and rotatable light heads for optimal illumination and security.
Billede: The ASD LED Motion Sensor Outdoor Flood Light, Model A-SFL-20BK, shown with its packaging. This image illustrates the product's design and included components.
Sikkerhedsoplysninger
Please read and understand all instructions before beginning installation. Failure to follow these instructions may result in electric shock, fire, or other hazards that could cause property damage or personal injury. Keep this manual for future reference.
- Elektrisk sikkerhed: Always turn off power at the circuit breaker before installing or servicing the fixture. Ensure all wiring connections are secure and comply with local electrical codes.
- Jording: The fixture must be properly grounded to prevent potential electrical shock.
- Uddannet elektriker: Hvis du er usikker på nogen del af installationsprocessen, skal du kontakte en kvalificeret elektriker.
- Driftstemperatur: Brug ikke armaturet uden for det angivne temperaturområde.
- Våde steder: This fixture is rated IP65 for wet locations, but ensure all seals and connections are properly secured during installation to maintain this rating.
Opsætning og installation
Follow these steps for proper installation of your flood light. Ensure power is OFF at the circuit breaker before proceeding.
1. Forbered til installation
- Pak armaturet ud og kontroller det for eventuelle skader.
- Ensure all necessary mounting hardware is present.
- Sluk for strømmen ved hovedafbryderen.
2. Montering af armaturet
- Fastgør monteringsbeslaget til samledåsen ved hjælp af de medfølgende skruer.
- Feed the electrical wires from the junction box through the gasket and into the fixture's wiring compartment.
- Fastgør armaturet til monteringsbeslaget.
3. Ledningsforbindelser
- Tilslut sort ledningen fra armaturet til black (live) ledningen fra strømforsyningen.
- Tilslut hvid ledningen fra armaturet til white (neutral) ledningen fra strømforsyningen.
- Tilslut green (ground) ledningen fra armaturet til green or bare copper (ground) ledningen fra strømforsyningen.
- Ensure all connections are secured with wire nuts and tucked neatly into the junction box.
4. Justering af lyshoveder
The light heads are rotatable 150° side-to-side and 180° up-and-down. Adjust them to cover your desired illumination area.
Billede: Illustration showing the 180° up-and-down and 150° side-to-side rotation capabilities of the flood light heads, allowing for precise light direction.
Billede: Detailed product specification diagram showing dimensions (10-1/4" L x 4-7/16" W x 6-13/16" H) and key features like motion sensor, photocell, 20W power, 5CCT, 2045lm brightness, and IP65 wet location rating.
Betjeningsvejledning
Your ASD LED Flood Light offers versatile operation modes and customizable settings.
1. Selecting Lighting Modes
Use the control dial on the motion sensor to select one of three operating modes:
- EN GANG: The light functions as a standard lamp, staying on continuously without motion sensing.
- DUSK TO DAWN (D2D): The light automatically turns on at dusk and off at dawn, based on ambient light levels detected by the photocell.
- BIL: The light turns on and off based on motion detection and your selected lux requirement settings (L - Low sensitive / M - Middle sensitive / H - High sensitive).
Billede: Diagram illustrating the control dial for selecting ON TIME, D2D (Dusk to Dawn), and AUTO modes, with visual examples of how the light behaves in each setting.
Billede: The flood light operating at night, demonstrating the built-in dusk-to-dawn photocell functionality which automatically activates the light when ambient light levels drop.
2. Indstillinger for bevægelsessensor
The integrated 180° motion sensor has a detection range of up to 60 feet. In AUTO mode, you can adjust the sensitivity:
- L (Low Sensitive): Less sensitive to movement, ideal for areas with minimal activity.
- M (Middle Sensitive): Standardfølsomhed til generel brug.
- H (High Sensitive): Most sensitive to movement, suitable for high-traffic areas or enhanced security.
You can also adjust the 'Hold Time' (how long the light stays on after motion is detected) and 'Ambient Light' (lux level at which the sensor becomes active) settings using the respective dials on the sensor unit.
Billede: A person walking in front of a garage, demonstrating the 180° detection angle of the high-sensitive motion sensor, which activates the flood light.
Billede: Diagram showing the flexible settings for the motion sensor, including Ambient Light (less than 10 lux), Hold Time (10 seconds to 10 minutes), and Detection Motion Speed (0.6-1.5 m/s), with a visual representation of the 60ft detection distance.
3. Color Temperature (CCT) Adjustment
The fixture offers 5 selectable color temperatures, ranging from warm to daylight. To change the CCT, locate the CCT switch on the fixture and slide it to your desired setting:
- 2700K: Blød hvid
- 3000K: Varm hvid
- 3500K: Neutral White
- 4000K: Cool White
- 5000K: Dagslys
Billede: Visual representation of the 5 CCT options (2700K, 3000K, 3500K, 4000K, 5000K) and how they appear when the flood light is active, allowing users to select their preferred light ambiance.
Opretholdelse
Regelmæssig vedligeholdelse sikrer optimal ydeevne og levetid for din projektør.
- Rensning: Rengør armaturet regelmæssigt med en blød, tør klud.amp klud. Brug ikke slibende rengøringsmidler eller opløsningsmidler, da de kan beskadige overfladen eller de elektriske komponenter.
- Inspektion: Annually inspect the wiring and mounting hardware for any signs of wear, corrosion, or loosening. Tighten connections as needed.
- Sensorlinse: Hold bevægelsessensorens linse ren og fri for forhindringer (f.eks. snavs, edderkopwebs) to ensure proper operation.
Fejlfinding
Hvis du oplever problemer med din projektør, kan du se følgende almindelige problemer og løsninger:
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Lyset tændes ikke. | No power, faulty wiring, incorrect mode setting, photocell detecting too much light. | Check circuit breaker. Verify wiring connections. Ensure mode is set to AUTO or ON TIME. Cover photocell to test if it's detecting light. |
| Lyset forbliver tændt konstant. | Mode set to ON TIME or D2D, constant motion detected, sensor sensitivity too high. | Switch mode to AUTO. Reduce motion sensor sensitivity (L setting). Check for constant heat sources or movement in detection zone. |
| Bevægelsessensoren registrerer ikke bevægelse. | Sensor obstructed, sensitivity too low, incorrect ambient light setting. | Clean sensor lens. Increase sensor sensitivity (H setting). Adjust ambient light setting on the sensor. Ensure sensor is aimed correctly. |
| Lyset flimrer eller dæmpes. | Loose wiring, voltage fluctuations, incompatible dimmer (if applicable). | Check and tighten all wiring connections. Consult an electrician for voltage issues. This fixture is not designed for use with dimmers. |
Produktspecifikationer
- Mærke: ASD
- Modelnavn: SFL A-SFL-20BK
- Varenummer: A-SFL-20BK
- Farve: Black with Motion Sensor
- Materiale: Aluminium, polycarbonat
- Stil: Moderne
- Lysarmaturform: Projektørlys
- Værelsestype: Udendørs rum
- Produktdimensioner: 10.24 cm L x 4.45 cm B x 6.81 cm H
- Specifikke anvendelser for produktet: Udendørs
- Indendørs/udendørs brug: Udendørs
- Strømkilde: Hardwired
- Installationstype: Flush Mount
- Særlige funktioner: 180° 3 Modes Motion Sensor and Photocell, 5 Color Temperature Options, Beam Angle 100°, Rotatable Light Heads for Directional Light Control, Wet Locations Rated (IP65)
- Kontrolmetode: Remote (referring to sensor adjustments, not a physical remote)
- Lyskildetype: LED
- Voltage: 120 volt
- Belysningsmetode: Justerbar
- Varens vægt: 1 pund
- Wattage: 20 watt
- Antal enheder: 1.0 tæller
- Monteringstype: Vægmontering
- Armatur type: Ikke aftagelig
- UPC: 810128113458
- Certificeringer: UL, DLC Premium
- Levetid: 145,000 timer
Garantioplysninger
This ASD LED Motion Sensor Outdoor Flood Light (Model A-SFL-20BK) is covered by a 5 års begrænset garanti fra købsdatoen. Denne garanti dækker defekter i materialer og udførelse ved normal brug. Den dækker ikke skader som følge af forkert installation, ulykker, misbrug, misbrug eller uautoriserede ændringer.
For warranty claims or further details, please retain your proof of purchase and contact customer support.
Kundesupport
If you have any questions, require technical assistance, or need to report an issue with your ASD LED Motion Sensor Outdoor Flood Light, please contact our customer support team.
Please visit the official ASD webwebstedet for de mest aktuelle kontaktoplysninger, herunder telefonnumre, e-mailadresser og online supportressourcer.
Online ressourcer: Visit the ASD Store on Amazon
