Electrolux Dishwasher Program Label 809054454 Instruction Manual

Indledning

This manual provides essential instructions for the installation, use, and maintenance of your new Electrolux Dishwasher Program Label, part number 809054454. This label is an original manufacturer spare part designed to replace a worn or damaged program label on compatible Electrolux dishwasher models. Please read these instructions carefully before proceeding with installation to ensure proper application and longevity of the product.

Sikkerhedsoplysninger

Always prioritize safety when working with appliances. Although this product is a non-electrical component, observe the following precautions:

• Ensure the dishwasher is turned off and unplugged from the power supply before attempting any installation or cleaning.
• Hold små dele væk fra børn for at undgå kvælningsfare.
• Use appropriate tools if required for removing old labels or cleaning surfaces.
• Bortskaf gamle dele ansvarligt i henhold til lokale regler.

Pakkens indhold

Din pakke skal indeholde følgende vare:

• 1 x Electrolux Dishwasher Program Label (Part No. 809054454)

Image of the Electrolux Dishwasher Program Label, showing the layout of wash cycles and options. This is the replacement part you should have received.

Installationsvejledning

Follow these steps to correctly install your new program label:

1. Klargøring af opvaskemaskinen: Ensure the dishwasher is completely turned off and unplugged from the electrical outlet. This prevents accidental operation during installation.
2. Remove the Old Label (if present): Carefully peel off the old program label. If it is stubborn, you may use a plastic scraper or a soft cloth with a mild adhesive remover (test on an inconspicuous area first) to avoid damaging the dishwasher's surface.
3. Rengør overfladen: Thoroughly clean the area where the new label will be applied. Use a mild detergent and water, then wipe dry with a clean, lint-free cloth. Ensure the surface is free of any adhesive residue, grease, or dirt. A clean, dry surface is crucial for proper adhesion.
4. Align the New Label: Carefully peel the backing from the new Electrolux program label. Position the label precisely over the designated area on your dishwasher's control panel. Take your time to ensure it is straight and centered.
5. Påfør etiketten: Once aligned, gently press the label onto the surface, starting from one edge and smoothing it out to the opposite edge. This helps to prevent air bubbles. Apply firm, even pressure across the entire label to ensure good adhesion.
6. Endelig kontrol: Inspect the newly applied label for any bubbles or misalignments. If necessary, gently lift and reapply if done immediately. Once satisfied, plug the dishwasher back in and restore power.

Understanding Your Program Label

The program label serves as a quick reference guide for your dishwasher's wash cycles and options. Familiarize yourself with the symbols and text on the label to select the appropriate program for your dishes.

• Programvalg: Match the desired wash cycle (e.g., Eco, Intensive, Quick) with the corresponding indicator on your dishwasher's control panel.
• Valgmuligheder: The label may also indicate additional options such as delay start, extra dry, or half load, if available on your specific dishwasher model.
• Consult Dishwasher Manual: For detailed descriptions of each program and option, refer to your main Electrolux dishwasher instruction manual.

Pleje og vedligeholdelse

To ensure the longevity and readability of your program label:

• Rensning: Wipe the label gently with a soft, damp cloth. Avoid abrasive cleaners, harsh chemicals, or scouring pads, as these can damage the print or the label material.
• Undgå direkte varme: While designed for dishwasher environments, prolonged exposure to extreme direct heat sources should be avoided.
• Beskyt mod ridser: Be mindful of sharp objects that could scratch or peel the label.

Fejlfinding

If you encounter issues with your program label, consider the following:

• Label Not Sticking: Ensure the surface was thoroughly cleaned and dry before application. If the label is peeling, it may indicate insufficient surface preparation or a faulty application. Re-clean the surface and apply a new label if necessary.
• Print Fading/Unreadable: This replacement label is designed for durability. If fading occurs prematurely, ensure you are not using harsh cleaning agents. If the issue persists, contact Electrolux customer support.
• Incorrect Programs Displayed: The label itself is a static guide. If your dishwasher is not performing the programs indicated, the issue lies with the dishwasher's internal components, not the label. Refer to your dishwasher's main manual or contact appliance service.

Specifikationer

Garanti og support

This Electrolux original spare part is covered by the standard manufacturer's warranty. For specific warranty terms and conditions, please refer to the documentation provided with your original dishwasher purchase or visit the official Electrolux webwebsted.

For technical support, replacement parts, or further assistance, please contact Electrolux customer service. You can typically find contact information on the Electrolux official webwebstedet eller i din opvaskemaskines hovedbrugsanvisning.

Online ressourcer: www.electrolux.com