SHEHDS 200W COB Par Light User Manual

1. Introduktion

This manual provides essential information for the safe and effective operation of your SHEHDS 200W COB Par Light. This professional stage lighting fixture features a 200W COB LED, offering both cool white (4500K) and warm white (3500K) illumination. Designed with an IP65 waterproof rating and a fanless, muted operation, it is suitable for various indoor and outdoor applications. Please read this manual thoroughly before installation and use.

2. Sikkerhedsinstruktioner

• Elektrisk sikkerhed: Sørg for, at strømforsyningen voltage matches the specified requirements of the fixture. Always connect to a grounded power outlet. Disconnect power before any service or maintenance.
• Installation: Install the fixture in a well-ventilated area, away from flammable materials. Ensure mounting surfaces and hardware can support the weight of the fixture.
• Temperatur: Do not operate the fixture in environments exceeding 40°C (104°F). Allow adequate space around the fixture for heat dissipation.
• Øjenbeskyttelse: Undgå direkte øjenkontakt med lyskilden, da det kan forårsage øjenskader.
• Vandtæt vurdering: The fixture is IP65 rated, meaning it is protected against dust and low-pressure water jets. While suitable for outdoor use in rain, avoid submerging the unit.
• Opretholdelse: Overlad al service til kvalificeret personale. Forsøg ikke at reparere enheden selv.

3. Pakkens indhold

Kontroller, at alle genstande er til stede ved udpakning:

• SHEHDS 200W COB Par Light (1 unit)
• Brugsanvisning (1 eksemplar)
• Signal Line (1 unit)
• Netledning (1 enhed)

Image: Contents of the SHEHDS 200W COB Par Light package.

4. Produktet er slutview og funktioner

The SHEHDS 200W COB Par Light is engineered for robust performance and versatility in various lighting scenarios.

• IP65 Vandtæt Design: Features a durable cast aluminum shell with waterproof signal lines, power cords, and control buttons, ensuring reliable operation in outdoor conditions.
• High-Brightness COB LED: Equipped with a 200W COB (Chip-on-Board) LED, providing uniform and powerful cool white (4500K) or warm white (3500K) illumination. The light is designed to be non-glare and eye-safe.
• Fanless Muted Operation: Operates silently without a cooling fan, making it ideal for environments where noise reduction is critical.
• Bred strålevinkel: Offers a beam angle of 65°-70°, with an effective range of up to 10 meters.
• Strobe and Dimmer Functions: Includes a shuttle flash rate of 0-10Hz and a 0-100% mechanical dimmer for dynamic lighting effects.
• Holdbar konstruktion: Built with a sturdy aluminum alloy shell and a long-lasting COB light source, ensuring an LED lifespan exceeding 60,000 hours.

Billede: Forside view of the SHEHDS 200W COB Par Light, illustrating its cool and warm white capabilities and IP65 rating.

Image: Close-up of the light's waterproof design and rear control panel.

5. Opsætning og installation

The SHEHDS 200W COB Par Light is designed for flexible installation. Always ensure the fixture is securely mounted to prevent accidents.

5.1 Monteringsmuligheder

• Gulvmontering: The integrated dual mounting brackets allow the light to be placed directly on a flat surface. Adjust the angle using the durable knobs on the sides.
• Ceiling/Truss Mount: The flexible dual mounting brackets can also be used to hang the fixture from a ceiling or truss system. Ensure appropriate clamps and safety cables (not included) are used and rated for the fixture's weight (approximately 10.78 lbs / 5.05 kg).

5.2 Strømtilslutning

Connect the provided power cord to the fixture's power input and then to a suitable grounded power outlet. Ensure the power source meets the fixture's electrical requirements.

5.3 DMX-tilslutning (valgfrit)

For DMX control, connect a DMX signal line from your DMX controller to the DMX IN port of the fixture. For multiple fixtures, daisy-chain them by connecting the DMX OUT of the first fixture to the DMX IN of the next, and so on. The fixture uses waterproof DMX connectors; ensure you use compatible cables or adapters.

Image: Dimensions and weight of the SHEHDS 200W COB Par Light.

6. Betjeningsvejledning

The SHEHDS 200W COB Par Light can be operated via its onboard control panel or an external DMX controller.

6.1 Indbygget kontrolpanel

The back control panel features a digital display and buttons to navigate menus and adjust settings. Press the 'Menu' button to cycle through options, 'Up'/'Down' to change values, and 'Enter' or 'OK' to confirm. Specific modes and settings include:

• DMX-adresseindstilling: Set the DMX starting address for external control. Once set and confirmed, the address is preserved even after power cycling.
• Manuel lysdæmper: Adjust the light intensity from 0-100%.
• Strobe effekt: Activate and adjust the flash rate from 0-10Hz.
• Farvevalg: Switch between Cool White (4500K) and Warm White (3500K) modes.

Billede: Eksamples of warm white and cool white lighting effects.

Image: Direct comparison of warm white and cool white output.

7. DMX kontrol

The SHEHDS 200W COB Par Light is compatible with DMX512 protocol, allowing for professional control over its functions.

7.1 DMX Channel Assignment

Refer to the specific DMX channel chart provided with your fixture for detailed channel assignments. Typically, channels will control:

• Channel 1: Hoveddæmper (0-100 %)
• Channel 2: Cool White Intensity
• Channel 3: Varm hvid intensitet
• Channel 4: Strobe Speed (0-10Hz)

Consult the fixture's display for the current DMX address and mode settings. Ensure your DMX controller is configured to match the fixture's address and channel mode.

8. Vedligeholdelse

Regular maintenance ensures optimal performance and extends the lifespan of your SHEHDS 200W COB Par Light.

• Rensning: Periodically clean the lens and exterior housing with a soft, lint-free cloth. Do not use abrasive cleaners or solvents.
• Inspektion: Regularly check power and signal cables for any signs of damage. Ensure all mounting hardware is secure.
• Opbevaring: Når armaturet ikke er i brug, skal det opbevares tørt og støvfrit.

9. Fejlfinding

If you encounter issues with your SHEHDS 200W COB Par Light, refer to the following common problems and solutions:

10. Specifikationer

Technical specifications for the SHEHDS 200W COB Par Light (Model: 200W_IP65).

11. Garanti og support

SHEHDS products are manufactured to high-quality standards. For warranty information, technical support, or service inquiries, please refer to the contact information provided at the point of purchase or visit the official SHEHDS webwebsted. Behold din købskvittering som købsbevis i tilfælde af garantikrav.