Erbauer EJS18-Li 18V Akku børsteløs stiksav brugermanual

Produkt overview

The Erbauer EJS18-Li is an 18V cordless brushless jigsaw designed for efficient and precise cutting. This powerful tool operates without a battery, allowing users to integrate it with their existing Erbauer 18V battery system. Its brushless motor technology ensures extended motor life, increased efficiency, and more power compared to brushed motors. It is suitable for various cutting tasks in wood, metal, and plastic, offering versatility for DIY enthusiasts and professionals.

Figur 1: Front view of the Erbauer EJS18-Li 18V Cordless Brushless Jigsaw. The tool features a blue and black housing, a comfortable handle, and a robust base plate. The Erbauer logo is visible on the side.

Vigtige sikkerhedsoplysninger

Always observe basic safety precautions when using power tools to reduce the risk of fire, electric shock, and personal injury. Read all instructions before operating this tool.

• Bær passende personlige værnemidler (PPE), herunder sikkerhedsbriller, høreværn og handsker.
• Sørg for, at arbejdsområdet er godt oplyst og fri for forhindringer.
• Hold børn og omkringstående væk, mens du betjener værktøjet.
• Brug ikke elværktøj i eksplosive atmosfærer, såsom i nærheden af ​​brændbare væsker, gasser eller støv.
• Frakobl altid batteripakken, før du foretager justeringer, skifter tilbehør eller opbevarer værktøjet.
• Brug den korrekte klinge til det materiale, der skæres.
• Secure the workpiece before cutting to prevent movement.
• Hold et fast greb om værktøjet, og vær opmærksom på tilbageslag.
• Opbevar værktøjet et tørt og sikkert sted utilgængeligt for børn.

Opsætning

1. Batteriinstallation

This jigsaw is supplied as a bare tool and requires an Erbauer 18V battery pack (sold separately). To install the battery, align the battery pack with the receptacle on the tool's base and slide it in until it clicks securely into place. Ensure the battery is fully charged before use.

2. Montering af kniv

1. Sørg for, at batteripakken er fjernet fra værktøjet.
2. Find bladkl.amp lever on the front of the tool.
3. Push the blade clamp lever forward to open the clamp.
4. Insert the shank of the jigsaw blade fully into the blade holder with the teeth facing forward.
5. Slip bladet clamp lever to secure the blade. Gently pull on the blade to ensure it is firmly seated.

3. Adjusting the Base Plate (Bevel Angle)

The base plate can be adjusted for bevel cuts. Loosen the base plate locking screw, tilt the base plate to the desired angle (e.g., 0°, 15°, 30°, 45°), and then securely tighten the locking screw. Always ensure the base plate is firmly locked before cutting.

Operation

1. Tænd/sluk

To start the jigsaw, press the trigger switch. The tool will begin to operate. To stop the tool, release the trigger switch. Some models may feature a lock-on button for continuous operation; press the trigger, then the lock-on button, and release the trigger. To turn off, press the trigger again.

2. Hastighedskontrol

The jigsaw features variable speed control, typically adjusted via a dial or by the pressure applied to the trigger. Select a lower speed for cutting harder materials or for more precise cuts, and a higher speed for softer materials or faster cutting.

3. Orbital Action

The orbital action setting allows the blade to move in an elliptical motion, providing faster cutting in softer materials like wood. Adjust the orbital action lever to the desired setting (usually 0 for no orbital action, and higher numbers for increased orbital action). Use setting 0 for metal and fine cuts.

4. Skæreteknikker

• Lige snit: Guide the jigsaw along a marked line, keeping the base plate flat against the workpiece. Apply steady, even pressure.
• Buede snit: Use a narrower blade for tighter curves. Guide the tool slowly, allowing the blade to follow the curve without forcing it.
• Dybsnit: For cuts starting in the middle of a workpiece, tilt the tool forward so the front edge of the base plate rests on the material. Start the tool, then slowly pivot it down until the blade cuts through the material.

Opretholdelse

Regular maintenance ensures the longevity and optimal performance of your jigsaw. Always disconnect the battery before performing any maintenance.

• Rensning: Rengør værktøjet med en blød klud efter hver brug.amp klud. Fjern støv eller snavs fra ventilationsåbningerne for at forhindre overophedning. Brug ikke skrappe kemikalier eller slibende rengøringsmidler.
• Udskiftning af knive: Replace dull or damaged blades promptly. Refer to the "Blade Installation" section for proper replacement procedure.
• Smøring: This tool features a brushless motor and sealed bearings, requiring no internal lubrication.
• Opbevaring: Store the jigsaw in a dry, secure location, away from direct sunlight and extreme temperatures. If storing for extended periods, remove the battery pack.
• Inspektion: Periodically inspect the power cord (if applicable, though this is cordless), switches, and housing for any signs of damage. If damage is found, have the tool serviced by a qualified technician.

Fejlfinding

Se tabellen nedenfor for almindelige problemer og deres mulige løsninger.

If the problem persists after attempting these solutions, please contact Erbauer customer support or a qualified service technician.

Specifikationer

Garanti og support

This Erbauer EJS18-Li Jigsaw is covered by the manufacturer's original warranty. Specific warranty terms and duration may vary by region and purchase date. Please refer to the warranty card included with your product or visit the official Erbauer webwebsted for detaljerede oplysninger.

For technical assistance, spare parts, or warranty claims, please contact Erbauer customer support through their official channels. Keep your proof of purchase for warranty validation.

While the product description mentions "original manufacturer's warranty," specific details such as duration or coverage are not provided in this manual. Please consult the product packaging or manufacturer's webwebsted for omfattende garantioplysninger.