RYOBI ONE+ 18V Cordless Precision Craft Rotary Tool Kit

Indledning

This manual provides instructions for the safe operation, setup, maintenance, and troubleshooting of your RYOBI ONE+ 18V Cordless Precision Craft Rotary Tool Kit, model PRT100K1. This tool is designed for light-duty hobby and craft projects, offering cordless convenience and variable speed control for precision tasks.

Læs venligst denne manual grundigt, inden du bruger værktøjet, og gem den til senere brug.

Generelle sikkerhedsoplysninger

ADVARSEL: Læs alle sikkerhedsadvarsler, instruktioner, illustrationer og specifikationer, der følger med dette elværktøj. Undladelse af at følge alle instruktionerne nedenfor kan resultere i elektrisk stød, brand og/eller alvorlig personskade.

• Bær altid øjenværn.
• Hold arbejdsområdet rent og godt oplyst.
• Brug ikke elværktøj i eksplosive atmosfærer, såsom i nærheden af ​​brændbare væsker, gasser eller støv.
• Hold børn og omkringstående væk, mens du betjener et elværktøj.
• Brug det rigtige værktøj til din applikation.
• Frakobl batteripakken fra værktøjet, før du foretager justeringer, skifter tilbehør eller opbevarer elværktøj.
• Opbevar inaktivt elværktøj utilgængeligt for børn, og lad ikke personer, der ikke er bekendt med elværktøjet eller disse instruktioner, betjene elværktøjet.

Pakkens indhold

Bekræft, at alle nedenstående varer er inkluderet i dit sæt:

• (1) RYOBI ONE+ 18V Precision Craft Rotary Tool (Model: PRT100K1)
• (15) Assorted Accessory Bits (for engraving, carving, sanding, polishing, cleaning)
• (1) RYOBI ONE+ 18V 2.0Ah Battery
• (1) RYOBI ONE+ 18V Charger
• (1) Skruenøgle
• (1) Brugermanual (dette dokument)

Image: RYOBI ONE+ 18V Cordless Precision Craft Rotary Tool Kit components.

Opsætning

1. Opladning af batteriet

1. Connect the RYOBI ONE+ 18V Charger to a standard electrical outlet.
2. Slide the 18V 2.0Ah Battery onto the charger until it clicks into place.
3. Lad batteriet oplades helt. Se opladerens indikatorlamper for opladningsstatus.
4. Når batteriet er opladet, skal det tages ud af opladeren.

Note: Always use the RYOBI ONE+ 18V Charger provided or a compatible RYOBI ONE+ charger for optimal performance and safety.

2. Installing Accessories (Quick-Change Collet)

The rotary tool features a Quick-Change Collet for fast and easy accessory changes. The collet size is 1/8 inch.

1. Ensure the rotary tool is turned off and the battery pack is removed.
2. Locate the collet nut at the front of the tool.
3. Press and hold the spindle lock button (if present) to prevent the spindle from rotating.
4. Unscrew the collet nut counter-clockwise using the provided wrench or by hand until it is loose.
5. Insert the desired accessory bit into the collet, ensuring it is seated as deeply as possible without the tip touching the tool housing.
6. Tighten the collet nut clockwise by hand, then use the wrench to secure it firmly. Do not overtighten.
7. Slip spindellåseknappen.

Forsigtighed: Always ensure accessories are securely installed before operation to prevent them from flying out during use.

Betjeningsvejledning

1. Tænd/sluk

• To turn the tool ON, slide the ON/OFF switch to the "ON" position.
• To turn the tool OFF, slide the ON/OFF switch to the "OFF" position.

2. Variabel hastighedskontrol

The rotary tool features 5 variable speed settings, allowing for maximum control and accuracy across different applications. The RPM range is from 4,400 to 23,000 RPM.

• Use lower speeds for polishing, delicate work, or when working with softer materials.
• Use higher speeds for cutting, grinding, or when working with harder materials.
• Adjust the speed setting using the speed control dial or buttons on the tool.

Tip: Always test the speed setting on a scrap piece of material before beginning your project to ensure optimal results and prevent damage.

3. Generelle tip til brug

• Apply light pressure. Let the tool and accessory do the work. Excessive pressure can cause the tool to bog down, overheat, or damage the workpiece.
• Keep the tool moving. Do not hold the accessory in one spot for too long, as this can cause gouging or burning.
• Match the accessory to the task. Use appropriate bits for engraving, carving, sanding, polishing, or cleaning.
• Utilize the cordless design for portability, allowing you to work in various locations without being tethered to an outlet.

Opretholdelse

1. Rensning

• Before cleaning, ensure the tool is off and the battery is removed.
• Tør værktøjets yderside af med en ren, tør klud.amp klæde. Brug ikke skrappe kemikalier eller slibende rengøringsmidler.
• Brug trykluft til at fjerne støv og snavs fra ventilationsåbningerne.
• Clean accessories after each use to maintain their effectiveness and prolong their lifespan.

2. Opbevaring

• Store the tool, battery, charger, and accessories in a dry, secure location, away from direct sunlight and extreme temperatures.
• Utilize the on-board accessory compartment for convenient storage of bits, keeping them organized and easily accessible.
• Sørg for, at batteriet er delvist opladet inden langtidsopbevaring for at bevare batteriets tilstand.

Fejlfinding

If you encounter issues not covered here, please contact RYOBI customer support.

Specifikationer

Garanti og support

This RYOBI ONE+ 18V Cordless Precision Craft Rotary Tool Kit (PRT100K1) is backed by a RYOBI 3 års producentgaranti.

For warranty claims, technical assistance, or to purchase replacement parts and accessories, please contact RYOBI customer support. Refer to the contact information provided on the product packaging or the official RYOBI webwebsted.

Please have your model number (PRT100K1) and proof of purchase available when contacting support.