1.Overview
The Autel MaxiCharger Home 50 Amp Hardwired EV Charger is a Level 2 electric vehicle supply equipment (EVSE) designed for efficient and intelligent charging of electric and plug-in hybrid vehicles. It offers advanced connectivity features and robust construction for reliable indoor and outdoor use.
Nøglefunktioner:
- Level 2 EV Charging: Charges up to 9X faster than a Level 1 charger, with a power output range of 6 to 50 amps.
- Bred kompatibilitet: Compatible with all EV and Hybrid Plug-in vehicles.
- Smart tilslutning: Features Bluetooth, Wi-Fi, Ethernet, CAN, and RS485 for comprehensive control.
- Mobil app kontrol: Manage charging, track usage, schedule sessions, and optimize for off-peak rates via the Autel Charge mobile app.
- Holdbart design: NEMA 4X protection rating ensures safe and reliable indoor and outdoor usage in various climates.
- Sikkerhedscertificeret: CSA Certified to UL safety standards.
2. Sikkerhedsoplysninger
VIGTIG: Before operating or maintaining this equipment, please read these instructions carefully. Pay extra attention to the safety warnings and precautions. Failure to use this product properly may cause damage and/or personal injury and will void the product warranty.
Generelle sikkerhedsadvarsler:
- Dette udstyr bør kun installeres af en autoriseret elektriker i overensstemmelse med alle lokale regler og bekendtgørelser.
- Dette udstyr skal jordes gennem et permanent ledningssystem eller en udstyrsjordingsleder.
- Installer eller brug ikke dette udstyr i nærheden af brændbare, eksplosive, barske eller brændbare materialer, kemikalier eller dampe.
- Børn skal være under opsyn, når de er i nærheden af dette udstyr.
- Stik ikke fingre eller fremmedlegemer ind i elbilens stik.
- Brug ikke udstyret, hvis den fleksible strømledning eller el-kablet er flosset, knækket eller på anden måde beskadiget eller ikke fungerer.
- Brug kun 90 °C kobberledere.
- Brug ikke udstyret uden for dets driftstemperaturområde på -40 til 131 °C (-40 til 55 °F).
- Incorrect installation and testing of the equipment could potentially damage the vehicle's battery, components, and/or the equipment itself.
- Håndter udstyret med forsigtighed under transport. Udsæt det ikke for kraftig kraft eller stød eller træk, vrid, filtret, træk eller træde på udstyret for at forhindre beskadigelse af det eller nogen komponenter.
3. Opsætning og installation
Installation of the Autel MaxiCharger Home requires a licensed electrician to ensure compliance with all local codes and safety standards. The charger is designed for hardwired installation.
Installationstrin:
- Montering af opladeren: Secure the provided wall mount bracket to a suitable surface. The charger then slides onto this bracket.
- Ledningsføring: A licensed electrician will connect the AC input cable to your electrical panel, ensuring correct amperage settings (20A to 50A, depending on your circuit). The charger comes with amperage labels for the electrical panel.
- Tænd: Once wired, turn on the power at your electrical panel.
- App konfiguration: Download the Autel Charge app, bind the charger, and configure settings such as Bluetooth, Wi-Fi, and charging preferences.
Videovejledning:
Video 3.1: This video provides a detailed guide on the installation process of the Autel EV charger, demonstrating each step for a smooth setup.
4. Betjening
The Autel MaxiCharger Home offers intuitive operation through its physical interface and the comprehensive Autel Charge mobile app.
Start af en opladning:
- Ensure the charger is powered on and connected to your home network (Wi-Fi or Ethernet).
- Plug the J1772 connector into your electric vehicle's charging port.
- Initiate charging via the Autel Charge app or by using an RFID card (if configured).
Using the Autel Charge App:
The advanced Autel Charge mobile app allows you to:
- Track charging sessions and electricity usage.
- Manage charging schedules to take advantage af elpriser uden for spidsbelastningsperioder.
- Monitor charge status in real-time.
- Remotely start, stop, and optimize charging.
- Utilize Smart AI Charging for seamless support and recognition.
Videoguider:
Video 4.1: Denne video giver en overview of the Autel MaxiCharger AC, showcasing its features and benefits for home EV charging.
Video 4.2: A short video highlighting the features of the Autel Home Smart EV Charger, including its up to 50 Amp charging capability.
5. Vedligeholdelse
The Autel MaxiCharger Home is designed for durability and minimal maintenance. Regular checks can help ensure optimal performance and longevity.
Generelle vedligeholdelsestips:
- Regelmæssig inspektion: Periodically inspect the charger and cable for any signs of physical damage, fraying, or wear. Ensure the connector is clean and free of debris.
- Miljøbeskyttelse: The NEMA 4X protection rating allows for safe indoor and outdoor use. However, avoid prolonged exposure to extreme conditions beyond the specified operating temperature range (-40 to 131 °F / -40 to 55 °C).
- Korrekt håndtering: Always handle the charging cable and connector with care. Avoid subjecting them to strong force, impact, pulling, twisting, tangling, dragging, or stepping on them.
- Softwareopdateringer: Keep the Autel Charge app and charger firmware updated to benefit from the latest features and performance improvements.
Videovejledning:
Video 5.1: This video demonstrates the reliability testing of the MaxiCharger AC, showcasing its durability under various conditions.
6. Fejlfinding
If you encounter issues with your Autel MaxiCharger Home, refer to the following common troubleshooting steps. For persistent problems, contact Autel support.
Almindelige problemer og løsninger:
- Opladeren tænder ikke:
- Check the circuit breaker at your electrical panel to ensure it hasn't tripped.
- Verify that the charger is correctly wired and all connections are secure (requires a licensed electrician).
- Opladning starter ikke:
- Ensure the charging cable is fully inserted into the vehicle's charging port.
- Check the Autel Charge app for any error messages or to manually start the charging session.
- Confirm that the vehicle is ready to accept a charge.
- Problemer med Wi-Fi/Bluetooth-forbindelse:
- Ensure your Wi-Fi network is 2.4GHz, as many smart devices require this frequency.
- Restart your home router and the EV charger.
- Try re-pairing the charger with the Autel Charge app via Bluetooth.
- Check for any special characters in your Wi-Fi network name or password, which can sometimes cause connection problems.
- Charging Speed Lower Than Expected:
- Bekræft amperage setting in the Autel Charge app. It should be configured to 80% of your circuit breaker's rating (e.g., 40A for a 50A circuit).
- Ensure your vehicle is capable of accepting the desired charging rate.
7. Specifikationer
| Feature | Detalje |
|---|---|
| Fabrikant | Autel |
| Model | MaxiCharger Home 50A EV Charger |
| Varemodelnummer | Maxi US AC W12 |
| Varens vægt | 22.4 pund |
| Produktdimensioner | 19 x 9 x 10 tommer |
| Ampslette | 50 Amps |
| Wattage | 12 KW |
| Udgang Voltage | 240 volt |
| Særlige funktioner | Autel Charge app enables remote start, stop, monitoring and scheduling, Bluetooth, Ethernet, Specially designed for Indoor or Outdoor use, Wi-Fi |
| Ydre | Malet |
| Farve | Mørkegrå |
| Driftstemperaturområde | -40 til 131 °F (-40 til 55 °C) |
| Beskyttelsesvurdering | NEMA 4X (Rainlight) |
| Certificeringer | CSA Certified to UL safety standards |
| Kabellængde | 25 fod |
| Connector Type | J1772 Universal Charging Cable |
8. Garanti og support
Garantioplysninger:
The Autel MaxiCharger Home EV Charger comes with a tre års begrænset garantiGem venligst din købsbevis i tilfælde af garantikrav.
Kundesupport:
For technical assistance, warranty claims, or any product-related inquiries, please refer to the online service section within the Autel Charge app or visit the official Autel Energy webwebsted: www.autelenergy.com.