AONBOY F2-Pump Cat Fountain Pump Instruction Manual

Indledning

Thank you for choosing the AONBOY F2-Pump Cat Fountain Pump. This manual provides essential information for the proper installation, operation, and maintenance of your pump to ensure its longevity and optimal performance. Please read these instructions carefully before use and retain them for future reference.

Image: The AONBOY F2-Pump, a blue submersible pump with a USB power connector and an integrated LED light. The image also displays several compatible cat fountains in different colors, illustrating the pump's application.

Produktegenskaber

• Kompatibilitet: Designed for AONBOY F2 cat water fountains and similar models.
• Ultra støjsvag drift: Features unique motor technology, operating below 40dB for minimal noise.
• Lavt strømforbrug: Efficient DC 5V-1.5W power usage.
• Lang levetid: Engineered for extended working life, typically 2.5-4 years with proper maintenance.
• Materialer af høj kvalitet: Constructed from BPA-free materials for pet safety.
• IP68 vandtæt: Fully submersible and protected against dust and continuous immersion in water.
• Easy Installation & Cleaning: Simple design facilitates quick setup and routine cleaning.

Image: A close-up of the AONBOY F2-Pump highlighting its key features: 1.5W Low Consumption, Long Life Span, Ultra Silent (less than 30dB), and IP68 Waterproof rating.

Sikkerhedsinstruktioner

For at sikre sikker drift og forhindre personskade eller beskadigelse, bedes du overholde følgende sikkerhedsretningslinjer:

• Always unplug the pump from the power source before handling, cleaning, or performing any maintenance.
• Do not operate the pump dry. Ensure it is fully submerged in water before connecting to power.
• Keep the power cord away from chewing pets. If the cord is damaged, discontinue use immediately.
• This pump is designed for indoor use with pet water fountains only. Do not use for other purposes or outdoors.
• Ensure the power adapter (not included with pump, typically supplied with fountain) is suitable for the pump's voltage (DC 5V).
• Opbevares utilgængeligt for børn.

Opsætningsinstruktioner

Follow these steps to install the AONBOY F2-Pump into your compatible cat water fountain:

1. Pakker ud: Tag forsigtigt pumpen ud af emballagen.
2. Skylle: Rinse the pump and all fountain components thoroughly with clean water before first use.
3. Saml springvand: Assemble your cat fountain according to its specific instructions, ensuring all filters and components are correctly placed.
4. Placer pumpe: Position the pump at the bottom of the fountain's water reservoir. The suction cups on the pump's base will help secure it.
5. Tilslut rør: Attach the fountain's water outlet tubing to the nozzle of the pump. Ensure a snug fit.
6. Fyld vand: Fill the fountain with water to the recommended maximum level, ensuring the pump is fully submerged. Do not overfill.
7. Tilslut strøm: Connect the pump's USB cable to a compatible 5V USB power adapter (not included) and then plug the adapter into a wall outlet.
8. Bekræft drift: The pump should start circulating water immediately. If it does not, refer to the Troubleshooting section.

Betjeningsvejledning

The AONBOY F2-Pump operates continuously once connected to power. No additional controls are typically required for basic operation.

• Kontinuerligt flow: The pump will provide a continuous flow of water, encouraging pets to drink more.
• Vandstand: Regularly check the water level in the fountain. Ensure the pump remains fully submerged to prevent dry running, which can damage the pump. Refill as needed.
• LED lys: The integrated LED light will illuminate when the pump is powered, providing visibility and a gentle glow.

Opretholdelse

Regular cleaning is crucial for extending the life of your pump and maintaining water quality. Clean the pump every 2 weeks.

1. Afbryd strømmen: Tag altid stikket ud af pumpen før rengøring.
2. Skille ad: Remove the pump from the fountain. Gently detach the front cover and impeller cover. Remove the impeller (rotor) assembly.
3. Rengøring af komponenter: Use a small brush (e.g., a toothbrush or pipe cleaner) to clean the impeller, impeller well, and the inside of the pump housing. Remove any hair, debris, or mineral deposits.
4. Skylle: Rinse all components thoroughly under running water.
5. Saml igen: Carefully reassemble the impeller, impeller cover, and front cover. Ensure all parts fit securely.
6. Clean Fountain: While the pump is disassembled, clean the entire fountain thoroughly, including the water reservoir and any filters.
7. Geninstaller: Place the cleaned pump back into the fountain and follow the Setup Instructions to resume operation.

Note: Hard water can lead to faster mineral buildup. Using filtered or distilled water can reduce the frequency of deep cleaning required for mineral deposits.

Fejlfinding

If you encounter issues with your AONBOY F2-Pump, please consult the following common problems and solutions:

Specifikationer

Garanti og support

AONBOY provides a 2-year replacement pump service for this product. If you experience any issues or have questions regarding your AONBOY F2-Pump, please contact our customer support team.

For support, please visit the AONBOY brand store on Amazon or contact us through the Amazon platform.

Visit AONBOY Brand Store