Indledning
This manual provides comprehensive instructions for the safe and efficient operation, maintenance, and troubleshooting of your Dahle PowerTEC 808 MS Digital Media Shredder. This machine is designed for the secure destruction of solid-state drives (SSDs), mini-tablets, cell phones, and flash drives, meeting Security Level O-3/E-3 standards. Please read this manual thoroughly before operating the shredder.
Sikkerhedsoplysninger
Always prioritize safety when operating the shredder. Failure to follow safety guidelines can result in injury or damage to the machine.
- Keep hands, hair, loose clothing, and jewelry away from the feed opening.
- Do not allow children or unauthorized personnel to operate the shredder.
- Sørg for, at makulatoren er placeret på en stabil, plan overflade.
- Disconnect power before cleaning, moving, or performing any maintenance.
- Do not shred items containing batteries without first removing the battery. Batteries pose a fire hazard when shredded.
- Avoid overloading the shredder.
- Brug kun i et godt ventileret område.
Billede: Top view of the shredder's feed opening, showing examples of media to be shredded (SSD, cell phone, mini tablet, USB drive, CD/DVD) and a clear warning to separate batteries from items before shredding due to fire hazard.
Hvad er der i æsken
Ved udpakning skal du kontrollere, at alle komponenter er til stede:
- Dahle PowerTEC 808 MS Digital Media Shredder Unit
- Strømkabel
- 5 Shred Bags
- Brugervejledning (dette dokument)
Opsætning
- Udpakning: Tag forsigtigt makulatoren ud af emballagen. Gem emballagen til senere transport eller opbevaring.
- Placering: Position the shredder on a firm, level surface capable of supporting its weight (287 pounds). Ensure adequate space around the unit for ventilation and operation.
- Installation af affaldspose: Open the shredder cabinet door. Place one of the provided shred bags into the waste bin, ensuring it is properly seated to collect shredded material. Close the cabinet door securely.
- Strømtilslutning: Connect the power cable to the shredder's power inlet and then plug it into a grounded electrical outlet. Ensure the power supply matches the shredder's requirements.
Image: The Dahle PowerTEC 808 MS Digital Media Shredder, ready for operation.
Betjeningsvejledning
Kontrolpanel overview
Billede: Detaljeret view of the LED keypad control panel and media feed slot.
The shredder features an intuitive LED keypad for operation:
- START-knap: Initiates the shredding process.
- STOP knap: Halts the shredding process immediately.
- REV (Reverse) Button: Reverses the cutting cylinders to clear minor jams.
- LED-indikatorer: Provide status information such as power on, bin full, door open, and overload warnings.
Shredding Digital Media
The PowerTEC 808 MS is designed to shred various digital media types. Always shred one item at a time to prevent jams and ensure proper destruction.
- Tænd: Ensure the shredder is plugged in and the main power switch (if present, typically on the back or side) is in the 'ON' position. The control panel LEDs should illuminate.
- Forbered medier: For cell phones and mini-tablets, remove batteries prior to shredding to avoid fire hazards.
- Indsæt medie: Place one item (SSD, cell phone, mini-tablet, flash drive, CD/DVD) into the feed opening.
- Start Shredding: Tryk på STARTE button. The shredder will automatically detect the item and begin the shredding process.
- Overvåge: Observe the shredding process. The machine's automatic jam protection will cycle through forward and reverse if resistance is detected, attempting to clear the item.
- Færdiggørelse: Once the item is shredded, the machine will stop. Repeat the process for additional items.
Automatisk beskyttelse mod papirstop
The shredder is equipped with automatic jam protection. If an item causes excessive resistance, the machine will automatically cycle the cutting cylinders forward and in reverse to attempt to clear the jam. If the jam persists, the shredder will stop, and an indicator light may illuminate. Refer to the Troubleshooting section for manual jam clearing procedures.
Opretholdelse
Regelmæssig vedligeholdelse sikrer optimal ydeevne og forlænger levetiden på din makulator.
- Tømning af affaldsbeholderen: When the "Bin Full" indicator illuminates, or when the bin is visibly full, disconnect the power, open the cabinet door, remove the full shred bag, and replace it with an empty one.
- Rensning: Periodically wipe down the exterior of the shredder with a soft, dry cloth. Do not use abrasive cleaners or solvents. Ensure the feed opening is clear of debris.
- Smøring: While the PowerTEC 808 MS features a chain-driven motor designed for durability, consult the manufacturer's guidelines for any recommended lubrication schedules for the cutting cylinders. Use only shredder-specific oil if lubrication is advised.
- Inspektion: Regularly inspect the power cord for damage. Check the cutting cylinders for any foreign objects or excessive wear.
Fejlfinding
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Shredder does not start | No power; Door open; Waste bin full; Overheat protection activated. | Check power connection; Ensure door is closed; Empty waste bin; Allow shredder to cool down. |
| Shredder jams frequently | Overfeeding; Incorrect media type; Foreign object in cutting cylinders. | Feed one item at a time; Ensure media is compatible; Use REV button to clear, or disconnect power and carefully remove obstruction. |
| Makuleringsmaskinen kører kontinuerligt | Sensor blokeret. | Clear any debris from the feed opening sensors. |
| Usædvanlig støj under drift | Foreign object; Worn components. | Immediately press STOP. Disconnect power and inspect cutting cylinders for foreign objects. If noise persists, contact customer support. |
Specifikationer
- Model: Dahle PowerTEC 808 MS
- Sikkerhedsniveau: O-3 / E-3 Cross Cut
- Makuleringsstørrelse: 4 mm x 5 mm
- Motor: 3.5 HP Chain Driven
- Waste Capacity: 4 gallons
- Strimler: SSDs, Mini Tablets, Cell Phones, Flash Drives, CDs/DVDs
- Produktdimensioner: 21.75 x 21.75 x 39.5 tommer
- Varens vægt: 287 pund
- Fabrikant: Dahle
Billede: Overview of the Dahle PowerTEC 808 MS highlighting key features and capabilities.
Image: Internal components of the shredder, illustrating the robust motor and cutting mechanism.
Garanti og support
For warranty information, technical support, or to order replacement parts, please contact Dahle customer service. Refer to the official Dahle webwebstedet eller din købsdokumentation for specifikke kontaktoplysninger og garantivilkår.
Fabrikant: Dahle
Webwebsted: www.dahle.com
