1. Introduktion
This manual provides essential information for the proper installation, operation, and maintenance of your Superwinch 90-32492 Solenoid. This solenoid is designed as a replacement part for various Superwinch models, including the Tiger Shark 9500, 11500, 35000, SX10, and SX12 winches. Please read this manual thoroughly before attempting any installation or operation to ensure safety and optimal performance.
2. Sikkerhedsoplysninger
Always prioritize safety when working with electrical components and winches. Failure to follow these safety guidelines may result in personal injury or damage to equipment.
- Afbryd strømmen: Always disconnect the vehicle's battery before performing any electrical work on the winch or solenoid.
- Professionel installation: If you are not experienced with automotive electrical systems, it is recommended to have the solenoid installed by a qualified professional.
- Korrekt ledningsføring: Ensure all wiring connections are correct, secure, and insulated to prevent short circuits. Refer to your winch's specific wiring diagram.
- Undgå kontakt: Do not touch live electrical terminals.
- Brug de rigtige værktøjer: Brug isoleret værktøj, der er egnet til elektrisk arbejde.
3. Pakkens indhold
Kontroller, at alle varer er til stede og ubeskadigede, når du åbner pakken.
- 1 x Superwinch 90-32492 Solenoid
4. Opsætning og installation
The Superwinch 90-32492 Solenoid is a critical component in the winch's electrical system, controlling the power flow to the winch motor. Proper installation is essential for safe and reliable operation.
- Forberedelse: Ensure the vehicle's battery is disconnected. Identify the location of the existing solenoid pack on your winch.
- Removal of Old Solenoid: Carefully disconnect all wiring from the old solenoid, noting the position of each wire (e.g., motor terminals, battery terminals, control wires). Take photos if necessary for reference. Remove the old solenoid from its mounting.
- Montering af den nye solenoid: Position the new Superwinch 90-32492 Solenoid in the designated mounting location. Secure it using appropriate fasteners.
- Ledningsforbindelser: Connect the wires to the new solenoid according to the wiring diagram provided with your winch or the markings on the solenoid itself. Ensure all connections are tight and corrosion-free. The solenoid typically has four large terminals for the motor and battery connections, and smaller terminals for control signals.
Figur 1: Top view of the Superwinch 90-32492 Solenoid, showing the four main copper terminals with nuts and washers for secure electrical connections. The black housing protects the internal components.
Figur 2: Side view of the solenoid, featuring a printed wiring diagram (ZJSF-41X-12V) indicating the internal relay configuration and terminal numbering. This diagram is crucial for correct electrical hookup.
Figur 3: A different side perspective of the solenoid, highlighting the integrated mounting tabs on the base. These tabs allow for secure attachment to the winch frame or a mounting plate.
Figur 4: En vinklet view of the solenoid, providing a comprehensive look at both the main power terminals and the smaller control terminals located on the bottom section. This view helps in visualizing the overall connection points.
Vigtig: Always refer to the specific wiring diagram for your Superwinch model to ensure correct connections. Incorrect wiring can damage the solenoid, winch, or vehicle electrical system.
5. Betjening
The solenoid acts as an electrical switch, controlled by the winch's remote or dash switch. When the control signal is received, the solenoid engages, allowing high current from the battery to flow to the winch motor, enabling it to spool in or out. When the control signal is released, the solenoid disengages, cutting power to the motor.
- Ensure all connections are secure before operating the winch.
- Operate the winch according to its specific instruction manual.
- Listen for a distinct 'click' sound when activating the winch, indicating the solenoid is engaging.
6. Vedligeholdelse
Regular inspection and basic maintenance can extend the life of your solenoid.
- Undersøg forbindelser: Periodically check all electrical connections for tightness and signs of corrosion. Clean any corrosion with a wire brush and apply dielectric grease.
- Tjek for skader: Inspect the solenoid housing for any cracks, melting, or other physical damage.
- Hold rent: Keep the solenoid free from dirt, mud, and excessive moisture.
- Undgå overophedning: While designed for high current, prolonged heavy use of the winch can cause the solenoid to heat up. Allow for cooling periods during extensive winching operations.
7. Fejlfinding
If your winch is not functioning correctly, the solenoid may be a point of failure. Use the following table to diagnose common issues.
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Winch does not operate, no click from solenoid. | No power to control terminals, faulty remote/switch, or internal solenoid failure. | Check control wiring and remote/switch. Test for voltage at control terminals. If control power is present and no click, replace solenoid. |
| Spillet fungerer langsomt eller svagt. | Poor main power connections, low battery voltage, or partially failed solenoid contacts. | Check battery charge and main power cable connections for corrosion or looseness. If connections are good, solenoid may be failing. |
| Solenoid clicks but winch does not operate. | Internal solenoid contacts are engaging but not passing current, or motor issue. | This often indicates a failed solenoid. Verify motor is not seized. Replace solenoid if motor is functional. |
| Solenoid gets excessively hot. | Overload on winch, prolonged operation, or internal resistance. | Reduce load on winch, allow cooling periods. If heat persists under normal load, solenoid may be faulty. |
8. Specifikationer
| Feature | Detalje |
|---|---|
| Modelnummer | 90-32492 |
| Mærke | Superwinch |
| Varens vægt | 2 pund |
| Produktdimensioner | 4 x 4 x 2 tommer |
| Udvendig finish | Pulverlakeret |
| Materiale | Stål |
| Farve | Sort |
9. Garanti og support
For warranty information and technical support, please refer to the official Superwinch webwebstedet eller kontakt deres kundeservice direkte. Behold din købskvittering som købsbevis.
Superwinch Customer Service: Besøg venligst Superwinch Store on Amazon eller deres embedsmand webwebsted for kontaktoplysninger.
