1. Produktet er slutview
The Erbauer ECD18-Li-2 18V Cordless Brushless Impact Drill is a compact and lightweight tool, ideal for accessing confined spaces. Its advanced brushless motor technology delivers enhanced power, higher torque, extended runtime, and a prolonged motor lifespan, ensuring revolutionary performance and autonomy.
Figur 1: The Erbauer ECD18-Li-2 Cordless Brushless Impact Drill. This image shows the drill unit with a battery pack attached, highlighting its compact design and the chuck at the front.
2. Sikkerhedsinstruktioner
Overhold altid grundlæggende sikkerhedsforanstaltninger ved brug af elektrisk værktøj for at reducere risikoen for brand, elektrisk stød og personskade.
- Læs manualen: Gør dig bekendt med alle instruktioner og advarsler inden brug.
- Brug personlige værnemidler (PPE): Brug altid øjenbeskyttelse, høreværn og egnede handsker.
- Sikkerhed på arbejdsområdet: Hold dit arbejdsområde rent og godt oplyst. Rodede eller mørke områder inviterer til ulykker.
- Elektrisk sikkerhed: Udsæt ikke elværktøj for regn eller våde forhold. Undgå kropskontakt med jordforbundne overflader.
- Brug og pleje af værktøj: Do not force the power tool. Use the correct power tool for your application. Ensure the switch is in the off-position before connecting to power source or battery pack.
- Sikkert arbejdsemne: Always secure the workpiece to prevent movement during drilling.
- Vedligehold værktøj: Hold skæreværktøj skarpt og rent. Følg instruktionerne for smøring og udskiftning af tilbehør.
- Batterisikkerhed: Only use specified battery packs and chargers. Do not short-circuit a battery pack. Do not expose battery packs to heat or fire.
3. Pakkens indhold
Upon opening the package, ensure all items listed below are present and in good condition.
- Erbauer ECD18-Li-2 Cordless Brushless Impact Drill Unit
- 2 x 4.0 Ah Li-ion Batteries
- Batterioplader
- Instruktionsmanual
- Bæretaske
- Bælteclips
4. Produktfunktioner
The Erbauer ECD18-Li-2 drill is equipped with several features designed for efficiency and user comfort:
- Børsteløs motorteknologi: Provides increased power, higher torque, longer runtime, and extended motor life.
- EXT Universal Battery System: Compatible with all Erbauer EXT 18V batteries, allowing for versatile use across multiple tools.
- Keep Cool Technology: Actively manages battery temperature to prevent overheating, offering more power, longer runtime, and extended battery life. The 4.0 Ah Keep Cool battery provides 25% more runtime than a standard Erbauer battery.
- Hurtig opladning: Full battery charge in approximately 50 minutes.
- 3-i-1 funktionalitet: Easily switch between impact drilling, standard drilling, and screwdriving modes.
- 13 mm nøglefri metalborepatron: Allows for quick, one-handed bit changes and features automatic spindle lock. Accommodates large drill bits for heavy-duty tasks.
- Trigger-Activated LED Light: Illuminates the work area for precise drilling.
- Convenient Belt Clip: For easy transport and accessibility.
- Blødt greb: Enhances user comfort during prolonged use.
5. Opsætning
5.1 Opladning af batteriet
- Tilslut batteriopladeren til en passende stikkontakt.
- Slide the 4.0 Ah Li-ion battery pack onto the charger until it clicks into place.
- Opladerens indikatorlampe viser opladningsstatus. En fuld opladning tager typisk 50 minutter.
- Når det er fuldt opladet, skal du frakoble batteriet fra opladeren.
5.2 Montering og afmontering af batteriet
- Vedhæftning: Juster batteripakken med bunden af borehåndtaget, og skub den ind, indtil den klikker sikkert på plads.
- Afmontering: Press the battery release button (usually located on the sides of the battery pack) and slide the battery pack off the drill.
5.3 Montering og fjernelse af borehoveder
- Sørg for, at boremaskinen er slukket, og at batteriet er fjernet af sikkerhedsmæssige årsager.
- To open the chuck, rotate the front part of the 13mm keyless metal chuck counter-clockwise until the jaws are wide enough to insert the drill bit.
- Sæt borekronen helt ind i spændepatronens kæber.
- Rotate the front part of the chuck clockwise to tighten the jaws firmly around the drill bit. The automatic spindle lock will assist in securing the bit.
- To remove, rotate the chuck counter-clockwise to loosen the jaws and pull the drill bit out.
6. Betjeningsvejledning
6.1 Selecting Operating Mode (3-in-1 Function)
The drill features a mode selector ring, typically located behind the chuck, allowing you to choose between three functions:
- Skruetrækningstilstand (Skrueikon): For driving and removing screws. Use with appropriate torque settings.
- Boretilstand (Drill bit icon): Til boring i træ, plastik og metal.
- Impact Drilling Mode (Hammer ikon): Til boring i murværk og beton.
Rotate the mode selector ring to the desired icon.
6.2 Justering af moment og hastighed
- Momentindstilling: For screwdriving, adjust the torque collar (numbered ring behind the mode selector) to prevent over-tightening or stripping screws. Start with a lower setting and increase as needed.
- Hastighedskontrol: The drill features variable speed control via the trigger. Press the trigger gently for lower speeds and harder for higher speeds. A speed selector switch (usually on top of the drill) allows for high or low-speed ranges.
6.3 Using the Trigger and LED Light
The drill is activated by pressing the main trigger switch. The integrated LED light will automatically illuminate the work area when the trigger is pressed, providing better visibility for precise work.
6.4 Brug af bælteclipsen
Attach the provided belt clip to either side of the drill (if applicable) for convenient temporary storage and easy access while working.
7. Vedligeholdelse
Regelmæssig vedligeholdelse sikrer din boremaskines levetid og optimale ydeevne.
- Rensning: Efter hver brug skal boremaskinen tørres af med en ren klud.amp klud. Brug ikke skrappe kemikalier eller slibende rengøringsmidler. Hold ventilationsåbningerne fri for støv og snavs.
- Batteripleje: Opbevar batterier et køligt, tørt sted væk fra direkte sollys og ekstreme temperaturer. Opbevar ikke fuldt afladede batterier i længere perioder.
- Vedligeholdelse af borepatron: Rengør spændepatronens kæber med jævne mellemrum for at sikre korrekt greb om borehovederne.
- Opbevaring: Store the drill and its accessories in the provided carry case in a dry, secure location, out of reach of children.
8. Fejlfinding
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Boremaskinen starter ikke. | Batteriet er ikke opladet eller ikke isat korrekt. | Oplad batteriet. Sørg for, at batteriet er helt indsat, indtil det klikker. |
| Reduceret effekt eller kort driftstid. | Batteriet er ikke fuldt opladet eller næsten helt opladet. | Oplad batteriet helt. Hvis problemet fortsætter, skal batteriet muligvis udskiftes. |
| Borepatronen holder ikke boret sikkert fast. | Spændepatronens kæber er snavsede eller slidte. | Clean chuck jaws. Ensure bit shank is clean. Tighten chuck firmly. |
| Overophedning under brug. | Excessive load or blocked ventilation. | Reduce pressure. Allow drill to cool. Clear ventilation slots. |
9. Specifikationer
| Attribut | Værdi |
|---|---|
| Mærke | ERBAUER |
| Modelnummer | ECD18-Li-2 |
| Voltage | 18 volt |
| Strømkilde | Batteri |
| Batteritype | Li-ion (2x 4.0 Ah included) |
| Motortype | Børsteløs |
| Chuck størrelse | 13 mm nøglefri metalborepatron |
| Vægt | 4 kg |
| Funktioner | Drilling, Impact Drilling, Screwdriving |
10. Garanti og support
This Erbauer ECD18-Li-2 Cordless Brushless Impact Drill is a new product supplied in its original packaging and benefits from the original manufacturer's warranty.
For warranty claims, technical support, or spare parts inquiries, please refer to the contact information provided in the original product packaging or visit the official Erbauer webwebsted. Gem din købsbevis for at validere garantien.
