Ryobi OLP1832BX 18V ONE+ Cordless Bypass Lopper

1. Sikkerhedsoplysninger

Læs og forstå altid alle sikkerhedsadvarsler, instruktioner, illustrationer og specifikationer, der følger med dette elværktøj. Manglende overholdelse af alle nedenstående instruktioner kan resultere i elektrisk stød, brand og/eller alvorlig personskade.

Generelle sikkerhedsadvarsler for elværktøj:

• Sikkerhed på arbejdsområdet: Hold arbejdsområdet rent og godt oplyst. Rodede eller mørke områder indbyder til ulykker. Brug ikke elværktøj i eksplosive atmosfærer, f.eks. i nærheden af ​​brandfarlige væsker, gasser eller støv.
• Elektrisk sikkerhed: Elværktøjsstik skal passe til stikkontakten. Modificer aldrig stikket på nogen måde. Brug ikke adapterstik med jordet (jordet) elværktøj.
• Personlig sikkerhed: Always wear eye protection, such as safety glasses with side shields, when operating the lopper. Wear appropriate clothing, non-skid safety shoes, and heavy-duty gloves. Stay alert, watch what you are doing, and use common sense when operating a power tool.
• Brug og pleje af værktøj: Tving ikke elværktøjet. Brug det korrekte elværktøj til din opgave. Frakobl batteriet fra elværktøjet, før du foretager justeringer, skifter tilbehør eller opbevarer elværktøjet.

Specific Lopper Safety Warnings:

• Hold hænder og kropsdele væk fra skærebladene. Bladene er skarpe og kan forårsage alvorlige skader.
• Ensure the safety switch is engaged when the tool is not in use or when changing batteries.
• Do not attempt to cut branches larger than the specified maximum cutting capacity (32mm).
• Always maintain a firm grip on the lopper during operation.
• Be aware of falling branches when pruning overhead.

2. Produktet er slutview

The Ryobi OLP1832BX is an 18V ONE+ cordless bypass lopper designed for effortless pruning of trees and larger plants. It features hardened bypass blades capable of cutting branches up to 32mm (1.3 inches) thick with 250Nm of torque. This tool is part of the Ryobi ONE+ system, allowing you to use the same 18V battery across a wide range of Ryobi tools.

Figure 2.1: The Ryobi OLP1832BX 18V ONE+ Cordless Bypass Lopper, showcasing dens ergonomiske design og skærehoved.

Nøglefunktioner:

• Trådløs drift: Powered by an 18V ONE+ battery (sold separately) for maximum portability.
• Bypass-blade: Hardened steel bypass blades provide clean, precise cuts.
• Skærekapacitet: Effortlessly cuts branches up to 32mm (1.3 inches) in diameter.
• Højt drejningsmoment: Delivers 250Nm of torque for powerful cutting performance.
• Ergonomisk design: Features soft-grip handles for comfortable use during extended periods.

Figure 2.2: A user holding the Ryobi OLP1832BX lopper, illustrating its extended length for reaching higher branches.

3. Opsætning

Batteri installation:

The Ryobi OLP1832BX is a 'body only' tool and requires an 18V ONE+ battery and charger (sold separately).

1. Ensure the lopper is turned off and the safety switch is engaged.
2. Juster batteripakken med batteriporten på værktøjets håndtag.
3. Slide the battery pack into the port until it clicks securely into place. Ensure it is fully seated.
4. To remove the battery, press the release latches on the sides of the battery pack and slide it out.

Note: Always use genuine Ryobi ONE+ 18V batteries and chargers for optimal performance and safety.

4. Betjeningsvejledning

Before operating, ensure the battery is fully charged and securely installed. Always wear appropriate personal protective equipment, including safety glasses and gloves.

Tænd/sluk:

• To turn on, disengage the safety switch (if present and engaged) and press the trigger. The blades will open.
• To turn off, release the trigger. The blades will return to their open position. Engage the safety switch when not actively cutting.

Skæreteknik:

1. Identify the branch to be cut. Ensure it is within the tool's 32mm (1.3 inch) cutting capacity.
2. Position the lopper blades around the branch, ensuring the branch is fully seated within the jaws.
3. Maintain a firm grip on the lopper.
4. Press the trigger to activate the cutting action. The blades will close, cutting through the branch.
5. Slip aftrækkeren for at lade knivene åbne sig til det næste snit.

Figur 4.1: Et nærbillede view of the lopper blades positioned around a branch, ready for cutting.

For optimal cutting performance, ensure the blades are clean and sharp. Avoid twisting the tool during a cut, as this can damage the blades or the tool mechanism.

Figure 4.2: The Ryobi lopper in action, demonstrating its ability to cut through a thicker branch.

5. Vedligeholdelse

Regular maintenance ensures the longevity and optimal performance of your Ryobi OLP1832BX lopper.

Rensning:

• Fjern batteripakken efter hver brug.
• Clean the blades and cutting head with a stiff brush or cloth to remove sap, debris, and plant residue.
• Apply a light coat of rust-preventative oil to the blades to protect them from corrosion.
• Tør værktøjets yderside af med en ren, tør klud.amp klæde. Brug ikke skrappe kemikalier eller slibende rengøringsmidler.

Klingepleje:

• Periodically check the blades for sharpness. Dull blades can lead to poor cutting performance and strain on the tool.
• If necessary, have the blades sharpened by a qualified service technician or use a suitable sharpening tool designed for bypass pruners.
• Inspect blades for damage or excessive wear. Replace damaged blades immediately.

Opbevaring:

• Store the lopper in a dry, secure location out of reach of children.
• Ensure the battery is removed before storing for extended periods.
• Opbevar batteriet et køligt, tørt sted, væk fra direkte sollys og ekstreme temperaturer.

6. Fejlfinding

This section addresses common issues you might encounter with your Ryobi OLP1832BX lopper.

7. Specifikationer

The following are the technical specifications for the Ryobi OLP1832BX 18V ONE+ Cordless Bypass Lopper:

• Model: OLP1832BX
• Strømkilde: 18V ONE+ batteri (medfølger ikke)
• Bladtype: Bypass
• Bladmateriale: Legeret stål
• Maksimal skærediameter: 32 mm (1.3 tommer)
• Moment: 250 Nm
• Varens vægt: Cirka 4.18 pund (1.9 kg)
• Produktdimensioner: 35.47"L x 6.22"W (approx. 90.1 cm L)
• Håndtag Materiale: Gummi, plastik
• Farve: Grøn

8. Garanti og support

Ryobi products are manufactured to high-quality standards and are backed by a comprehensive warranty. For specific warranty details, including duration and coverage, please refer to the warranty card included with your purchase or visit the official Ryobi webwebsted.

For technical assistance, spare parts, or service inquiries, please contact Ryobi customer support. Contact information can typically be found on the Ryobi webwebstedet eller i din produktemballage.

Online ressourcer: For additional information, FAQs, and product registration, visit the official Ryobi webwebsted: www.ryobitools.com