JBL Professional Control 52 Surface-Mount Satellite Speaker

Indledning

The JBL Professional Control 52 is a stylish surface-mount satellite loudspeaker designed for subwoofer-satellite loudspeaker systems. It delivers superb high-fidelity sound through a low-distortion 60 mm (2.5 inch) driver. Key features include a secondary bucking magnet for high efficiency, a rubber half-roll surround for enhanced bass performance, a 19 mm (0.75 inch) copper-clad aluminum wire voice coil on a vented Nomex former for high fidelity and reliability, and a copper-capped pole piece for consistent impedance and extended high-frequency response. The included wall bracket allows for angling the speaker up to 45 degrees off-axis, providing flexible placement options.

Nøglefunktioner

• Wall-mount brackets included for flexible installation.
• 16 Ohms impedance and a frequency range of 140 Hz – 20 kHz.
• Stylish, unobtrusive design suitable for various decors.
• Compatible with JBL Control 42C in-ceiling and JBL Control 62P pendant satellite speakers for integrated systems.
• Designed to complement the JBL Control 50S/T Surface-Mount Subwoofer for a complete audio system.

Hvad er der i æsken

• JBL Professional Control 52 Surface-Mount Satellite Speaker (Pair)
• Vægmonterede konsoller
• Brugervejledning (dette dokument)

Opsætning og installation

The Control 52 satellite speakers are designed for surface mounting and come with all necessary brackets for installation. Ensure you have appropriate tools and follow local building codes for secure mounting.

Figur 1: Forside view of the JBL Control 52 Satellite Speaker.

Montering af højttalerne

1. Identificér monteringssted: Choose a location on a wall or other suitable surface that provides optimal sound dispersion and is structurally sound. The speakers can be angled up to 45 degrees.
2. Fastgør beslag: Use the included wall-mount brackets. Securely attach the brackets to the chosen surface using appropriate screws and anchors (not included, depending on wall material).
3. Tilslut ledninger: Tilslut højttalerledninger fra din amplifier to the binding posts on the back of each Control 52 speaker. Ensure correct polarity (red to positive, black to negative).
4. Monter højttalere: Attach the Control 52 speakers to the installed brackets. The design allows for various orientations (vertical or horizontal) and angles.

Figure 2: A pair of JBL Control 52 Satellite Speakers, showing the integrated wall mounts.

Ledningsforbindelser

The Control 52 speakers are passive and require an external amplifier. Connect the speaker wires to the spring-loaded terminals on the rear of each speaker. Match the positive (+) terminal on the speaker to the positive (+) terminal on your ampog den negative (-) terminal på højttaleren til den negative (-) terminal på din amplivligere.

Figur 3: Side view of the JBL Control 52 Satellite Speaker, highlighting the adjustable mounting bracket.

Video Guide: Speaker Wiring and Mounting

Betjeningsvejledning

Når den er korrekt installeret og tilsluttet en kompatibel amplifier, the JBL Control 52 speakers are ready for use. These speakers are designed to work as part of a subwoofer-satellite system, meaning they handle mid-range and high frequencies, while a separate subwoofer handles the bass.

Tænd/sluk

The Control 52 speakers are passive and do not have their own power switch. They are powered by the connected amplifier. Turn your amplifier on or off to control the speakers.

Lydstyrkekontrol

Juster lydstyrken ved hjælp af din amplifier or audio source. Avoid setting the volume too high, which can cause distortion and potentially damage the speakers.

Optimal placering

For the best audio experience, position the speakers to create a balanced sound field. Experiment with the angling feature of the wall brackets to direct sound towards the primary listening area. When used with a subwoofer, ensure the subwoofer is placed in a location that provides even bass distribution throughout the room.

Opretholdelse

Regular maintenance helps ensure the longevity and optimal performance of your JBL Control 52 speakers.

• Rensning: Use a soft, dry cloth to wipe the speaker cabinets. Avoid using abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish.
• Fjernelse af støv: Gently brush any dust from the speaker grilles using a soft brush or a vacuum cleaner with a brush attachment on a low setting.
• Miljøforhold: These speakers are designed for indoor use. Avoid exposing them to extreme temperatures, direct sunlight, high humidity, or moisture, as they are not waterproof.
• Kabelinspektion: Periodically check speaker cables for any signs of wear, fraying, or damage. Replace damaged cables immediately to prevent electrical hazards and maintain sound quality.

Fejlfinding

If you experience issues with your JBL Control 52 speakers, refer to the following common troubleshooting steps:

Specifikationer

Garanti og support

The JBL Professional Control 52 Surface-Mount Satellite Speaker comes with a Limited Warranty. For specific details regarding warranty coverage, duration, and terms, please refer to the warranty card included in your product packaging or visit the official JBL webwebsted.

For technical support, service, or additional product information, please contact JBL customer service or visit the JBL-butik på Amazon.