Ohmex WMT-2655FIX Wall Mount Instruction Manual

1. Introduktion

This manual provides detailed instructions for the safe and proper installation, operation, and maintenance of your Ohmex WMT-2655FIX Wall Mount. This fixed wall mount is designed to securely hold flat screen televisions ranging from 26 to 55 inches with a maximum weight capacity of 30 kg. Please read this manual thoroughly before installation to ensure correct setup and to prevent damage or injury.

The Ohmex WMT-2655FIX is engineered for a secure, low-profile installation, positioning your television approximately 25 mm from the wall. It supports VESA mounting patterns up to 400x400 mm.

2. Sikkerhedsoplysninger

ADVARSEL: Improper installation or use of this product can result in serious injury or damage. If you do not understand these instructions or have doubts about the safety of the installation, please consult a qualified professional.

• Overskrid ikke den maksimale vægtkapacitet på 30 kg (66 lbs).
• Sørg for, at vægkonstruktionen sikkert kan bære den samlede vægt af beslaget og fjernsynet.
• Always use a stud finder to locate wall studs for secure mounting. Do not mount into drywall alone.
• Verify that the mounting surface is free from electrical wires, plumbing, or other hazards before drilling.
• Brug passende sikkerhedsudstyr, herunder øjenbeskyttelse, under installationen.
• Hold børn og kæledyr væk under installationen.
• Dette produkt er kun beregnet til indendørs brug.

3. Pakkens indhold

Please check that all components are present and undamaged before beginning installation. If any parts are missing or defective, contact Ohmex customer support.

• Vægplade (1)
• Tv-beslag (2)
• Mounting Hardware Kit (Screws, anchors, washers, spacers)

This image displays the Ohmex WMT-2655FIX fixed wall mount. It consists of a rectangular wall plate with horizontal slots and two vertical TV brackets that attach to the wall plate. The mount is black and designed for flat screen televisions.

4. Værktøj, der kræves til installation

Følgende værktøjer anbefales til en vellykket installation:

• Blyant
• Målebånd
• Stud Finder
• Drill with appropriate drill bits (for wood studs or concrete/brick)
• Niveau
• Phillips hovedskruetrækker
• Sikkerhedsbriller

5. Opsætning og installation

VIGTIG: To personer anbefales for sikker installation.

1. Forbered tv'et:
   • Placer forsigtigt dit tv med forsiden nedad på en blød, ren overflade for at forhindre, at skærmen beskadiges.
   • Identificer VESA-monteringshullerne på bagsiden af ​​dit tv.
   • Attach the two TV brackets to the back of your TV using the appropriate screws, washers, and spacers from the mounting hardware kit. Ensure the brackets are centered and securely fastened. Do not overtighten.
2. Bestem vægpladens position:
   • Using a stud finder, locate the center of two adjacent wall studs where you intend to mount the TV. Mark these locations with a pencil.
   • Hold the wall plate against the wall at the desired height, aligning the mounting holes with the marked stud centers. Use a level to ensure the wall plate is perfectly horizontal.
   • Mark the drilling points through the wall plate holes onto the wall.
3. Bor pilothuller:
   • Using an appropriate drill bit (e.g., 5/32" or 4mm for wood studs), drill pilot holes at the marked locations. Ensure the depth is sufficient for the lag bolts.
   • If mounting to concrete or brick, use a masonry drill bit and appropriate wall anchors (not always included, may need to be purchased separately).
4. Attach Wall Plate to Wall:
   • Align the wall plate with the drilled pilot holes.
   • Indsæt hængeboltene med skiver gennem vægpladen og ind i forboringshullerne.
   • Tighten the lag bolts securely using a wrench or socket, but do not overtighten to avoid stripping the threads or damaging the wall.
5. Monter TV på vægplade:
   • Løft forsigtigt tv'et op med de medfølgende beslag med hjælp.
   • Hægt TV-beslagene fast på vægpladens øverste kant.
   • Sænk forsigtigt tv'et, indtil beslagene går helt i indgreb med vægpladen.
   • Locate the safety screws or locking mechanisms on the bottom of the TV brackets and tighten them to secure the TV to the wall plate. This prevents accidental dislodgement.
6. Endelig kontrol:
   • Gently pull on the top and bottom of the TV to ensure it is securely mounted and does not wobble.
   • Confirm the TV is level.

6. Operating the Wall Mount

The Ohmex WMT-2655FIX is a fixed wall mount, meaning it does not offer tilt, swivel, or extension capabilities. Once installed, your television will remain in a static position, approximately 25 mm from the wall.

• Ensure all cables are properly connected and routed before securing the TV to the mount.
• Avoid applying excessive force or hanging objects from the mounted television.

7. Vedligeholdelse

Regular maintenance helps ensure the continued safety and stability of your wall mount.

• Periodiske kontroller: Every 6-12 months, visually inspect the mount and all fasteners. Ensure all screws and bolts are tight and that there are no signs of wear, corrosion, or damage.
• Rensning: Dust the mount with a soft, dry cloth. Do not use abrasive cleaners or solvents, as these may damage the finish.
• Skade: If any part of the mount appears damaged or compromised, do not use it. Contact Ohmex customer support for assistance.

8. Fejlfinding

• TV'et er ikke i vater efter installation:
  • Carefully remove the TV from the wall mount.
  • Check the wall plate's level. If it's not level, loosen the lag bolts slightly, adjust the plate using a level, and retighten.
  • Re-mount the TV and re-check for levelness.
• TV'et passer ikke til beslaget:
  • Verify your TV's VESA mounting pattern matches the mount's compatibility (up to 400x400 mm).
  • Ensure your TV's screen size is within the 26-55 inch range and its weight does not exceed 30 kg.
• Manglende dele:
  • Refer to the "Package Contents" section. If parts are missing, contact Ohmex customer support.

9. Specifikationer

10. Garantioplysninger

Specific warranty details for the Ohmex WMT-2655FIX Wall Mount are not provided in this manual. Please refer to the product packaging or contact Ohmex customer support for information regarding warranty coverage and terms.

11. Kundesupport

For technical assistance, missing parts, or warranty inquiries, please contact Ohmex customer support. Contact information can typically be found on the product packaging or the official Ohmex webwebsted.