JBL Clip 2 Portable Waterproof Bluetooth Speaker User Manual

Indledning

The JBL Clip 2 is an ultra-light, ultra-rugged, and ultra-powerful portable speaker designed for on-the-go audio. Its waterproof design and integrated carabiner make it an ideal companion for various activities, whether indoors or outdoors. This manual will guide you through the setup, operation, and maintenance of your JBL Clip 2 speaker.

Hvad er der i æsken

• 1 x JBL Clip 2 Speaker
• 1 x Micro USB cable for charging
• 1 x Quick start guide
• 1 x Sikkerhedsark
• 1 x garantibevis

Produkt overview

Figur 1: Forside view of the JBL Clip 2 speaker, highlighting its integrated 3.5mm audio cable and carabiner clip.

Figure 2: The JBL Clip 2 speaker positioned next to a smartphone, illustrating its compact form factor and readiness for wireless connection.

Opsætning

1. Opladning af højttaleren

Before first use, fully charge your JBL Clip 2. Connect the provided Micro USB cable to the charging port on the speaker and to a USB power source. The LED indicator will show charging status. A full charge takes approximately 2.5 hours.

2. Tænd/sluk

Press the power button located on the side of the speaker to turn it on or off. You will hear an audible tone indicating the power status.

3. Bluetooth-parring

1. Turn on your JBL Clip 2 speaker.
2. Tryk på Bluetooth-knappen på højttaleren. LED-indikatoren blinker blåt, hvilket indikerer, at den er i parringstilstand.
3. On your smartphone or Bluetooth-enabled device, go to the Bluetooth settings and select "JBL Clip 2" from the list of available devices.
4. Når der er forbindelse, lyser LED-indikatoren konstant blåt, og du vil høre en bekræftelsestone.

4. Wired Connection (Auxiliary Input)

The JBL Clip 2 features an integrated 3.5mm audio cable. Unwind the cable from its storage slot on the back of the speaker and plug it into the headphone jack of your audio device. The speaker will automatically switch to auxiliary input mode.

Betjening af højttaleren

1. Musikafspilning og lydstyrkekontrol

Once connected via Bluetooth or auxiliary cable, you can control music playback and volume directly from your connected device or using the dedicated buttons on the JBL Clip 2. Use the '+' button to increase volume and the '-' button to decrease volume.

2. Højttalertelefonens funktionalitet

The JBL Clip 2 has a built-in microphone, allowing you to answer calls directly through the speaker. When a call comes in, press the phone icon button to answer. Press it again to end the call.

3. Daisy Chain Feature (JBL Connect)

You can wirelessly link two JBL Clip 2 speakers together to amplify your listening experience. To do this, ensure both speakers are powered on and not connected to any device. Press the JBL Connect button on both speakers simultaneously to pair them. Once connected, they will play audio in stereo.

4. Portability with Carabiner

The integrated aluminum carabiner allows you to easily clip the JBL Clip 2 to your backpack, belt loop, or any secure attachment point, making it highly portable for outdoor adventures.

Opretholdelse

1. Vandtæt pleje

The JBL Clip 2 is IPX7 waterproof, meaning it can be submerged in water up to 1 meter (3 feet) for up to 30 minutes. Ensure all port covers are securely closed before exposing the speaker to water. After exposure to water, dry the speaker thoroughly before charging or using the ports.

2. Rensning

For at rengøre højttaleren skal du bruge en blød,amp cloth. Avoid using harsh chemicals or abrasive materials, as these can damage the finish or internal components.

Fejlfinding

• Ingen strøm: Sørg for, at højttaleren er opladet. Tilslut den til en strømkilde med Micro USB-kablet.
• Kan ikke parres via Bluetooth: Make sure the speaker is in pairing mode (flashing blue LED). Check your device's Bluetooth settings to ensure it's discoverable. If issues persist, try restarting both the speaker and your device.
• Ingen lyd: Check the volume levels on both the speaker and your connected device. Ensure the correct input source (Bluetooth or Aux) is selected.
• Dårlig lydkvalitet: Move the speaker closer to your Bluetooth device to reduce interference. Ensure the speaker is not obstructed.

Specifikationer

Garanti og support

Your JBL Clip 2 speaker comes with a limited warranty. Please refer to the included Warranty Card for detailed terms and conditions. For technical support, product registration, or further assistance, please visit the official JBL webwebsted eller kontakt deres kundeservice.