1. Introduktion
This manual provides essential information for the safe and efficient installation, operation, and maintenance of your Steinbach 040955 CPS 40-2 Filtration Pump. Please read these instructions carefully before using the pump to ensure proper function and longevity of the product. This pump is designed for filtering pool water up to approximately 19,000 liters capacity and is compatible with Steinbach Classic 300, Classic 250, and ActiveBalls+ filtration systems.
2. Sikkerhedsinstruktioner
Overhold altid følgende sikkerhedsforanstaltninger for at forhindre personskade eller beskadigelse af pumpen.
- Elektrisk sikkerhed: Ensure the power supply matches the pump's specifications (240 Volts). Always disconnect the pump from the power supply before performing any maintenance or cleaning. Do not operate the pump with a damaged power cord or plug.
- Vandsikkerhed: Never operate the pump dry. Ensure the pump is fully primed with water before starting. Keep children and pets away from the pump during operation.
- Placering: Install the pump on a stable, level surface. Ensure adequate ventilation around the pump to prevent overheating.
- Temperatur: The pump is designed for water temperatures up to 35 degrees Celsius.
3. Produktet er slutview
The Steinbach 040955 CPS 40-2 is a robust filtration pump designed for efficient pool water circulation. It features a durable plastic housing and an electric cable power source. The pump is compact and operates quietly.
Figur 3.1: Forside view of the Steinbach 040955 CPS 40-2 Filtration Pump.
Figur 3.2: Side view of the pump, showing the inlet and outlet connections.
Figure 3.3: Visual representation of the pump's dimensions, approximately 20 cm (8.2 inches) in height.
Figure 3.4: Product packaging displaying key specifications such as 230V/200W power, 6.5m max head, and 6000 l/h flow rate.
4. Opsætning
Follow these steps for proper installation of your filtration pump:
- Udpakning: Tag forsigtigt alle komponenter ud af emballagen. Undersøg for eventuelle skader.
- Placering: Position the pump on a firm, level surface near your pool, ensuring it is protected from direct weather exposure and has adequate air circulation.
- Slangeforbindelser: Connect the appropriate hoses (32mm or 38mm diameter) to the pump's inlet and outlet ports. Ensure all connections are secure and watertight to prevent leaks.
- Grunding: Before starting, ensure the pump is fully primed with water. This typically involves filling the pump housing with water until it overflows from the suction port.
- Elektrisk tilslutning: Connect the pump to a grounded electrical outlet (240V). Ensure the circuit is protected by a Residual Current Device (RCD) for safety.
5. Betjening
Once the pump is set up and primed, you can begin operation:
- Start af pumpen: Turn on the power supply to the pump. The pump should start circulating water immediately.
- Overvågning: Observe the water flow and pressure. The pump operates quietly, indicating efficient performance.
- Køretid: The optimal run time for your pump depends on your pool size and usage. Consult your pool system's guidelines for recommended daily filtration cycles.
- Lukker ned: To turn off the pump, simply disconnect it from the power supply.
6. Vedligeholdelse
Regular maintenance ensures the longevity and efficiency of your filtration pump:
- Rensning: Periodically clean the pump's exterior with a damp klæde. Brug ikke skrappe kemikalier.
- Filter System Maintenance: This pump works in conjunction with a filtration system. Regularly clean or replace the filter cartridges or media as recommended by your filter system's manual.
- Vinterisering: If you live in an area with freezing temperatures, disconnect the pump and drain all water from it before winter. Store the pump in a dry, frost-free location.
- Slangeinspektion: Regularly check hoses and connections for wear, cracks, or leaks. Replace damaged components as needed.
7. Fejlfinding
Hvis du støder på problemer med din pumpe, kan du se følgende almindelige problemer og løsninger:
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Pumpen starter ikke | Ingen strømforsyning Motor overophedning Løbehjulet sidder fast | Kontroller strømtilslutning og afbryder Allow pump to cool down Disconnect power and inspect/clear impeller |
| Lav vandgennemstrømning | Pumpen ikke primet Tilstoppet filter Luftlækage i sugeledningen | Spæd pumpen igen Rengør eller udskift filter Check all suction line connections for tightness |
| Pumpen larmer | Luft i systemet Affald i pumpehjulet Pumpen kører tør | Udluft systemet Afbryd strømmen og fjern snavs Ensure pump is primed and has continuous water supply |
8. Specifikationer
| Feature | Specifikation |
|---|---|
| Fabrikant | Steinbach |
| Modelnummer | 040955 |
| Produktmål (L x B x H) | 22.5 x 15.5 x 33.5 cm (8.86 x 6.1 x 13.19 tommer) |
| Vægt | 4 kg (8.82 lbs) |
| Flowhastighed | 6000 l/h (75 Liters per minute) |
| Maks. hovedhøjde | 6.5 meter |
| Voltage | 240 volt |
| Strømforbrug | 200 watt |
| Materiale | Plast |
| Farve | Sort, Sølv |
| Slangetilslutningsdiameter | 32mm / 38mm |
| Maks. Vandtemperatur | 35 ℃ |
| Certificering | Certificeret frustrationsfri |
| International artikelkode | 9008748409551 |
9. Garanti og support
Specific warranty information for the Steinbach 040955 CPS 40-2 Filtration Pump is not explicitly provided in the product data. For any product-related inquiries, technical support, or warranty claims, please contact Steinbach customer service directly or refer to the official Steinbach webwebstedet for detaljerede supportoplysninger.
Please retain your proof of purchase for any warranty-related matters.
