1. Introduktion
The Legrand Ecobatibox Low Energy Recessed Box (Model LEG90509) is designed for secure and energy-efficient electrical installations in residential and commercial buildings. This box is specifically engineered for use with drywall and plasterboard, offering a robust and airtight solution that complies with modern thermal regulations. Its design facilitates easy installation of electrical outlets, switches, and other equipment, contributing to improved indoor air quality and energy performance.
2. Sikkerhedsoplysninger
ADVARSEL: Electrical installations should only be performed by qualified personnel in accordance with all local and national electrical codes and regulations. Failure to follow these instructions can result in electrical shock, fire, or serious injury.
- Afbryd altid strømmen ved hovedafbryderen eller sikringsboksen, før du påbegynder elektrisk arbejde.
- Brug passende personlige værnemidler (PPE), såsom isolerede handsker og sikkerhedsbriller.
- Sørg for, at alle ledningsforbindelser er sikre og korrekt isolerede.
- Do not exceed the maximum current or voltage ratings for the installed devices.
- Bekræft, at produktet er egnet til den tilsigtede anvendelse og det tilsigtede miljø.
3. Produktet er slutview
The Legrand Ecobatibox is a recessed electrical box designed for flush mounting in walls. Key features include:
- Materiale: Holdbar plastkonstruktion.
- Dimensioner: Approximately 1.97"D x 2.83"W x 2.8"H (50mm depth, 72mm width, 71mm height).
- Borediameter: 67mm for installation.
- Stationer: Designed for 2 posts/stations.
- Airtight Design: Complies with thermal regulations for low-consumption and passive homes, improving energy efficiency and indoor air quality.
- Kabelindgange: Features multiple inputs with detachable tabs for easy passage of electrical conduits.
- Fiksering: Wide flange and robust locking mechanism for secure installation in plasterboard, plywood, wood, or sheet metal.
Figur 1: Forside view of the Legrand Ecobatibox Low Energy Recessed Box (2 stations).
Figur 2: Side view showing cable entries and internal structure of the Ecobatibox.
4. Opsætning og installation
Follow these steps for proper installation of the Ecobatibox recessed box:
- Forbered væggen:
- Sørg for, at strømmen er afbrudt ved hovedafbryderen.
- Mark the desired location for the electrical box on the drywall or plasterboard.
- Using a 67mm hole saw, carefully drill a circular opening at the marked location.
- Prepare Cable Entries:
- Identify the required cable entry points on the Ecobatibox.
- Carefully detach the appropriate tabs to create openings for your electrical conduits. The flexible rubber seals ensure airtightness.
- Insert Cables and Box:
- Feed the electrical conduits through the prepared cable entries into the box.
- Insert the Ecobatibox into the drilled opening in the wall, ensuring it sits flush with the wall surface.
- Sikr kassen:
- The box features a locking mechanism with screws. Tighten the screws to engage the internal clamps, securing the box firmly against the plasterboard or drywall.
- Ensure the box is level before fully tightening.
- Wiring and Device Installation:
- Proceed with wiring your electrical device (switch, outlet, etc.) according to its specific instructions and local electrical codes.
- Mount the electrical device to the Ecobatibox using the provided screw holes. The screws are designed to be robust and of good length.
- Endelig kontrol:
- Once the device is installed and covered, restore power at the main circuit breaker.
- Test the functionality of the installed device.
5. Betjening
The Legrand Ecobatibox is a passive component designed to house electrical devices securely within a wall. Once installed, its primary function is to provide a safe, compliant, and airtight enclosure for electrical connections and devices. The operation of the electrical devices housed within the box (e.g., switches, outlets) is independent of the box itself and should be managed according to their respective user manuals.
6. Vedligeholdelse
The Ecobatibox is designed for long-term, maintenance-free operation.
- Periodisk eftersyn: Periodically inspect the visible parts of the installation for any signs of damage, loose connections, or wear.
- Rensning: If necessary, gently clean the exterior of the installed device and surrounding wall plate with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Professionelt tjek: For any concerns regarding the electrical installation, consult a qualified electrician.
7. Fejlfinding
The Ecobatibox itself is a static component and does not typically require troubleshooting. Issues usually arise from the electrical devices installed within it or the wiring.
- Enhedsfejl: If an electrical device (switch, outlet) is not working, first check the circuit breaker. If the breaker is tripped, reset it. If the problem persists, consult the device's manual or a qualified electrician.
- Løse forbindelser: If an electrical device intermittently fails, there might be a loose wire connection. ADVARSEL: Disconnect power before inspecting any wiring. This should only be done by a qualified electrician.
- Luftlækage: If you suspect air leakage around the box, ensure the box was properly installed and secured, and that all cable entries are sealed by the flexible tabs.
8. Specifikationer
| Attribut | Værdi |
|---|---|
| Mærke | Legrand |
| Modelnummer | LEG90509 |
| Materiale | Plast |
| Farve | Gul |
| Stil | 2 indlæg |
| Produktmål (D x B x H) | 1.97 cm D x 72 cm B x 2.83 cm H (ca. 50 mm x 2.8 mm x 71 mm) |
| Borediameter | 67 mm |
| Installationstype | Recessed (Ecobatibox) |
| Varens vægt | 1.41 ounce |
| Brug | Indendørs |
| Overholdelse | Compliant with new thermal regulations (Energy Class A) |
9. Garanti og support
For information regarding product warranty, please refer to the official Legrand website or contact Legrand customer support directly.
Legrand Customer Support: Besøg venligst www.legrand.us (eller din regionale Legrand website) for contact information, FAQs, and additional resources.
