1. Introduktion
This manual provides essential information for the safe and efficient operation of your InFocus IN116 Portable DLP Projector. Please read these instructions thoroughly before using the projector and retain them for future reference.
Pakkens indhold
Bekræft, at alle nedenstående varer er inkluderet i din pakke:
- InFocus IN116 Projector
- Strømledning
- RGB kabel
- A / V-kabel
- Sikkerhedsinstruktioner
- Brugervejledning (dette dokument)
- Fjernbetjening
- HDMI kabel
2. Produktet er slutview
The InFocus IN116 is a portable DLP projector designed for various applications, offering a native WXGA (1280 x 800) resolution, 2700 ANSI lumens brightness, and a 3000:1 contrast ratio. It features 3D-ready capabilities and multiple input options for flexible connectivity.
Nøglefunktioner
- WXGA (1280 x 800) Native Resolution
- 2700 ANSI Lumens (2200 lumens in Eco Mode)
- 3000: 1 Kontrastforhold
- 3D-Ready functionality
- HDMI-forbindelse
- Langtidsholdbar lamp til længerevarende brug
- Easy maintenance with no filters to replace
Projektor komponenter
Billede 1: Top View. This image displays the top of the InFocus IN116 projector, highlighting the control panel with buttons for power, menu, source selection, and navigation. The lens is visible at the front.
Billede 2: Side View. This image shows the side of the InFocus IN116 projector, featuring prominent ventilation grilles for heat dissipation.
Billede 3: Forside View. This image presents the front of the InFocus IN116 projector, with the lens actively emitting light, indicating its operational state.
Billede 4: Bagside View (Connectivity Panel). This image details the rear panel of the InFocus IN116 projector, displaying various input and output ports including HDMI, VGA (Computer In 1 & 2, Computer Out), S-Video, Composite Video, Audio In/Out, RS232C, and Mini USB.
3. Opsætningsvejledning
Placering
Position the projector on a stable, flat surface or mount it securely. Ensure adequate ventilation around the unit to prevent overheating. The projector can be placed on a table, ceiling-mounted, or used for rear projection.
Tilslutning til en strømkilde
- Tilslut netledningen til projektorens strømindgang.
- Sæt den anden ende af netledningen i en jordet stikkontakt.
Tilslutning af videokilder
The IN116 projector offers multiple input options:
- HDMI: For digital video and audio. Connect an HDMI cable from your source device to the projector's HDMI port.
- VGA (Computer In 1 & 2): For analog computer signals. Use a VGA cable to connect your computer to either VGA input.
- Sammensat video: For standard definition video. Connect a composite video cable (yellow RCA) to the projector's Video input.
- S-video: For enhanced standard definition video. Connect an S-Video cable to the projector's S-Video port.
For audio, connect an audio cable from your source to the projector's Audio In (3.5mm stereo) port if using VGA, Composite, or S-Video. HDMI carries both video and audio.
4. Betjeningsvejledning
Tænd/sluk
- For at tænde skal du trykke på Magt knappen på projektorens kontrolpanel eller fjernbetjeningen. Strømindikatorlampen lyser.
- For at slukke skal du trykke på Magt button twice. The projector will enter a cooling cycle before shutting down completely.
Valg af en inputkilde
Tryk på Kilde button on the projector or remote control to cycle through available input sources (HDMI, VGA1, VGA2, Video, S-Video). The projector will automatically detect an active signal.
Justering af billedet
- Fokus: Drej fokusringen på projektorlinsen, indtil billedet er skarpt og klart.
- Zoom: Juster zoomringen på projektorlinsen for at ændre billedstørrelsen.
- Keystone-korrektion: Hvis billedet ser trapezformet ud, skal du bruge keystone-korrektionen (findes normalt i OSD-menuen eller via dedikerede knapper på fjernbetjeningen) til at firkante billedet.
- Billedtilstande: The projector offers various picture modes (e.g., Presentation, Bright, Movie, Eco Mode). Access these through the OSD menu to optimize image quality for different environments.
Øko-tilstand
Activate Eco Mode to extend lamp life and reduce power consumption. This mode is ideal for environments with lower ambient light. The lamp life is approximately 6,000 hours in Eco Mode, compared to 5,000 hours in normal mode.
3D funktionalitet
The InFocus IN116 is 3D-ready and supports 3D content from compatible sources, including Blu-ray players. To view 3D content, you will need compatible 3D glasses and a 3D-enabled source device. Refer to your 3D source device's manual for specific setup instructions.
Video 1: InFocus IN110xv Series Overview. Denne video giver et generelt overblikview of the InFocus IN110xv series projectors, which includes the IN116 model. It highlights features such as lamp life, resolution options (including WXGA for IN116), brightness, vivid color technology, and 3D readiness. This video is provided by InFocus Corporation.
5. Vedligeholdelse
Lamp Udskiftning
Projektoren lamp har en begrænset levetid. Når lamp indicator light illuminates or the image brightness significantly decreases, it's time to replace the lamp. Den lamp door is conveniently located on top of the projector for easy access, even when ceiling-mounted.
- Power off the projector and disconnect the power cord.
- Allow the projector to cool down completely (at least 30 minutes).
- Find og åbn lamp door on the top of the projector.
- Fjern forsigtigt den gamle lamp modul.
- Installer den nye lamp modulet, og sørg for, at det sidder sikkert fast.
- Luk lamp door and reconnect the power cord.
- Nulstil lamp timeren i projektorens OSD-menu.
Forsigtighed: Projektor lamps operate at high temperatures and pressures. Handle with care. In rare cases, lamps can explode. Always wear protective eyewear when replacing a lamp.
Rensning
- Ydre: Brug en blød, damp cloth to clean the projector's exterior. Do not use abrasive cleaners or solvents.
- Linse: Use a lens cleaning cloth and lens cleaning solution specifically designed for optical surfaces. Avoid touching the lens with your fingers.
- Filtre: The InFocus IN116 projector is designed to operate without user-replaceable filters, simplifying maintenance.
6. Fejlfinding
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Intet billede vises |
|
|
| Billedet er sløret |
|
|
| Projektoren overopheder og slukker |
|
|
| HDMI picture has a blue tint |
|
|
7. Specifikationer
| Feature | Detalje |
|---|---|
| Modelnummer | IN116 |
| Displayteknologi | DLP |
| Indfødt opløsning | WXGA (1280 x 800) |
| Lysstyrke | 2700 ANSI Lumens (2200 lumens Eco Mode) |
| Kontrastforhold | 3000:1 |
| Lamp Life (Normal/Eco) | 5,000 timer / 6,000 timer |
| Forbindelsesteknologi | HDMI, VGA (x2), Composite Video, S-Video, Audio In (3.5mm), Audio Out (3.5mm), RS232C, USB B Mini |
| Speciel funktion | 3D-klar |
| Produktdimensioner | 12.75 x 12.75 x 5.5 tommer |
| Varens vægt | 4.78 pund (2.17 kg) |
| Fabrikant | Infocus |
| Dato først tilgængelig | 1. maj 2011 |
8. Garanti og support
Begrænset garanti
All new DLP projectors from InFocus, including the IN116, are backed by a comprehensive limited warranty:
- Projektor: 5 års begrænset garanti
- Reservedele og arbejdskraft: 2 års fuld garanti
- Lamp: 6 måneders garanti
For detailed terms and conditions of the warranty, please refer to the official InFocus webwebsted eller kontakt kundesupport.
Kundesupport
For technical assistance, troubleshooting, or warranty claims, please contact InFocus customer support. Visit the official InFocus webwebsted for kontaktoplysninger og yderligere ressourcer.
Officiel Webwebsted: www.infocus.com
