1. Introduktion
This manual provides detailed instructions for installing the Scosche HA1710B Double DIN Radio Install Dash Kit. This kit is designed to facilitate the installation of an aftermarket car stereo into select 2001-05 Honda Civic vehicles, providing a factory-like appearance.
Please read all instructions carefully before beginning the installation process. Ensure all necessary tools and components are available.
2. Kompatibilitet
This dash kit is compatible with select 2001-05 Honda Civic models. It is not compatible with Civic Si modeller.
For specific compatibility, refer to the fit guide image below. This kit is designed for Double DIN installations only.
Image: Fit Guide for Scosche HA1710B Dash Kit. This guide illustrates vehicle compatibility, specifically noting that the kit works with 2001-05 Honda Civic DX, LX, and EX models, but is not for use with Civic Si models. It also indicates that it is for Double DIN installations only.
Scosche Double DIN Kits accommodate True Double DIN stereos with a maximum faceplate opening of 96.8mm x 173mm. Some radios labeled as Double DIN may be oversized, potentially requiring minor trimming of the kit for a proper fit.
Image: Industry Standard Sized Opening. This diagram provides the dimensions for the stereo opening in the dash kit, which are 96.8mm (3-13/16 inches) in height and 173mm (6-13/16 inches) in width. This is for reference to ensure your aftermarket stereo will fit.
3. Pakkens indhold
Bekræft, at alle nedenstående varer er inkluderet i din pakke:
- Radio Bezel (Dash Kit)
- Instruktionsmanual
- Monteringsbeslag (venstre og højre)
- Hardware (screws, clips)
Image: Scosche HA1710B Dash Kit. This image displays the primary dash kit bezel, which frames the aftermarket stereo.
Billede: Vinklet view of the Scosche HA1710B Dash Kit. This perspective highlights the design and mounting tabs of the dash kit bezel.
Image: Car Stereo Dash Kit Components. This image shows the dash kit along with representations of a wire harness and antenna adapter, noting that the latter two are sold separately.
4. Sikkerhedsoplysninger
- Frakobl altid bilens negative batteripol, inden du påbegynder elektrisk arbejde, for at undgå kortslutninger og elektrisk stød.
- Brug passende personlige værnemidler, såsom sikkerhedsbriller.
- Sørg for, at køretøjet er parkeret på en plan overflade med parkeringsbremsen aktiveret.
- Se din bils servicehåndbog for specifikke instruktioner om fjernelse af fabrikskomponenter.
- If you are unsure about any step, consult a qualified professional installer.
5. Installation
The following video provides a comprehensive overview of the installation process, from preparation to final testing. Detailed steps are also provided below.
Video: Scosche Stereo Installation. This video demonstrates the general process of installing a Scosche stereo kit, including disconnecting the battery, preparing the dash kit components by removing unnecessary tabs, installing the new stereo into the dash kit, removing the factory stereo, making wiring connections, plugging in harnesses, installing the new stereo into the dash, reconnecting the battery, and testing the radio.
5.1. Forberedelse
- Afbryd batteriet: Frakobl den negative batteripol på dit køretøj.
- Review Instruktioner: Read through the entire instruction manual provided with the dash kit and your new stereo.
- Identify Tabs: Efter vedrviewing the instructions, identify and remove any tabs on the dash kit components that are not required for your specific application.
5.2. Factory Radio Removal
- Fjern beklædningspaneler: Using a panel removal tool, carefully pry off and remove any trim panels surrounding your factory stereo.
- Skru fabriksradioen af: Locate and unscrew the mounting screws holding the factory radio in place.
- Frakobl selerne: Gently pull out the factory radio and unplug all electrical harnesses and antenna cables from the back.
5.3. Ledningsforbindelser
Connect the aftermarket stereo's wiring harness to the vehicle's wiring harness. Match wire colors according to the instructions provided with your aftermarket stereo and the Scosche wiring adapter (if purchased separately).
- Use splice connectors or solder connections for secure and reliable electrical contact.
- Ensure all connections are properly insulated with electrical tape or heat shrink tubing.
- Some wires, such as amplifier turn-on, parking brake sense, and steering wheel control connections, may require specific routing or additional adapters not included in this kit.
5.4. Dash Kit Assembly
- Fastgør beslag: Secure the left and right mounting brackets to your new aftermarket stereo using the screws provided with the stereo.
- Insert Stereo: Slide the assembled stereo and brackets into the dash kit bezel.
5.5. New Stereo Installation
- Tilslut ledninger: Plug the vehicle's wiring harness into the aftermarket stereo's harness. Connect the antenna cable.
- Monter stereoanlæg: Carefully slide the new stereo assembly into the dashboard opening. Secure it with the factory mounting screws.
- Geninstaller trim: Reattach all removed trim panels, ensuring they snap securely into place.
5.6. Sidste trin
- Gentilslut batteri: Tilslut den negative batteripol igen.
- Test funktioner: Turn on the vehicle and test all functions of the new stereo, including audio, radio, and any connected accessories.
6. Betjening
This dash kit provides the mounting solution for your aftermarket stereo. For detailed operating instructions of your new stereo, please refer to the instruction manual provided by the stereo manufacturer.
7. Vedligeholdelse
- Kontroller regelmæssigt monteringsskruerne for fastspænding.
- Clean the dash kit and stereo faceplate with a soft, damp klud. Undgå skrappe kemikalier eller slibende rengøringsmidler.
- Ensure no debris accumulates around the stereo or in the dash opening.
8. Fejlfinding
- Stereo does not power on:
- Kontroller batteriforbindelserne.
- Verify all wiring harness connections are secure and correct.
- Check the stereo's fuse.
- Poor fit of stereo in dash kit:
- Ensure all unnecessary tabs on the dash kit were removed.
- Confirm your aftermarket stereo's dimensions are within the kit's specifications (96.8mm x 173mm). Minor trimming may be required for oversized units.
- Verify factory radio brackets are used as required.
- Dash kit does not fit vehicle:
- Double-check vehicle compatibility (2001-05 Honda Civic, non-Si models).
- Ensure all factory components were removed correctly.
9. Specifikationer
| Modelnummer | HA1710B |
| Produktdimensioner | 1.5 x 6.5 x 13.25 tommer |
| Varens vægt | 1.6 ounce |
| Farve | Sort |
| Materiale | OEM Quality Materials (ABS Plastic) |
| Kompatibilitet | Select 2001-05 Honda Civic (DX, LX, EX models) |
| Stereo Type | Double DIN (Max faceplate opening: 96.8mm x 173mm) |
10. Garanti og support
The Scosche HA1710B Dash Kit is backed by Scosche's Limited Lifetime Warranty and Lifetime Tech Support.
For technical assistance or warranty claims, please contact Scosche customer support directly. Refer to the official Scosche website or product packaging for contact information.
