Hitachi CP-X2511 Projector User Manual

1. Introduktion

This manual provides essential information for the safe and efficient operation of your Hitachi CP-X2511 Projector. Please read it thoroughly before using the projector and keep it for future reference. The Hitachi CP-X2511 is designed for clear and bright presentations, featuring 2,700 ANSI Lumens, Native XGA Resolution, and a 2000:1 Contrast Ratio.

2. Sikkerhedsoplysninger

• Strømforsyning: Brug kun den specificerede strømforsyning voltage. Sørg for, at netledningen er korrekt tilsluttet og ikke er beskadiget.
• Ventilation: Do not block the ventilation openings. Adequate airflow is crucial to prevent overheating.
• Lamp: Projektoren lamp fungerer ved høje temperaturer og tryk. Lad projektoren køle af, før du flytter eller udfører vedligeholdelse. Se ikke direkte ind i linsen, når lamp er tændt.
• Placering: Placer projektoren på en stabil, plan overflade. Undgå steder med meget støv, fugtighed eller ekstreme temperaturer.
• Service: Forsøg ikke selv at udføre service på projektoren. Overlad al service til kvalificeret servicepersonale.

3. Pakkens indhold

Bekræft, at alle nedenstående varer er inkluderet i din pakke:

• Hitachi CP-X2511 Projector Unit
• Fjernbetjening
• VGA-kabel
• Strømkabel

Figure 3.1: Projector and included accessories, including the remote control, VGA cable, and power cable.

4. Produktet er slutview

4.1 Forside og top Views

Figur 4.1: Forside og side view of the projector, highlighting the lens and air vents.

Figur 4.2: Øverst view of the projector, displaying the control panel and status indicators.

4.2 Kontrolpanel

The control panel on the top of the projector provides access to essential functions:

• STANDBY/ON-knap: Tænder eller slukker projektoren.
• INPUT knap: Selects the input source (e.g., Computer, Video).
• MENU knap: Åbner skærmmenuen (OSD).
• Navigationsknapper (op, ned, venstre, højre): Bruges til at navigere gennem menupunkter og justere indstillinger.

4.3 Indikatorlys

The projector features several indicator lights to show its status:

• LAMP: Indicates lamp status.
• MIDLERTIDIG: Warns of high internal temperature.
• MAGT: Shows the power status (on, standby, cooling).

4.4 Forbindelsesporte

The projector offers various input and output ports for connecting external devices:

• RGB In (x2): For connecting computers or other devices with VGA output.
• RGB Out (x1): Til tilslutning til en ekstern skærm.
• Sammensat video: For standard video input.
• S-video: For enhanced video input.
• Lyd ind/ud: For audio connections.

Figur 4.3: Side view of the projector, illustrating the array of input and output ports.

Figur 4.4: Side view af projektoren, der viser ventilationsgitrene til varmeafledning.

Figur 4.5: Nederst view of the projector, featuring the product label with model and electrical details.

5. Opsætning

5.1 Placering

Overvej følgende, når du placerer din projektor:

• Projektionsafstand: Adjust the distance from the screen to achieve the desired image size.
• Vinkel: Ensure the projector is as perpendicular to the screen as possible to minimize keystone distortion.
• Miljø: Avoid direct sunlight or strong artificial light sources that could wash out the image.

5.2 Tilslutning af enheder

1. Tilslut videokilde: Use the appropriate cable (VGA, Composite, or S-Video) to connect your computer, DVD player, or other video source to the projector's input ports.
2. Tilslut lyd (valgfrit): If your source device has separate audio output and you wish to use the projector's internal speaker or an external audio system, connect an audio cable to the projector's audio input.
3. Tilslut strøm: Plug the power cable into the projector's AC inlet and then into a wall outlet.

6. Betjeningsvejledning

6.1 Tænd/sluk

• For at tænde: Press the STANDBY/ON button on the control panel or remote control. The POWER indicator will turn green.
• For at slukke: Press the STANDBY/ON button again. The projector will enter a cooling cycle, and the POWER indicator may flash. Do not unplug the projector until the cooling cycle is complete.

6.2 Valg af indgangskilde

Press the INPUT button on the control panel or remote control repeatedly to cycle through the available input sources (e.g., Computer 1, Computer 2, Video, S-Video).

6.3 Grundlæggende billedjusteringer

• Fokus: Drej fokusringen på objektivet, indtil billedet er skarpt.
• Zoom: Drej zoomringen på objektivet for at justere billedstørrelsen.
• Keystone-korrektion: The projector features Auto V Keystone correction. If manual adjustment is needed, use the menu options to correct trapezoidal distortion.
• Lyd: The projector has a 16W speaker output and supports audio pass-through. Adjust volume via the remote or source device.

7. Vedligeholdelse

7.1 Lamp Udskiftning

Lamp life is approximately 6,000 hours in Eco Mode. When the lamp når slutningen af ​​sit liv, LAMP indicator will illuminate or flash. Refer to the full service manual for detailed lamp replacement instructions. Always use a genuine Hitachi replacement lamp.

7.2 Rengøring/udskiftning af filter

The projector features an easily accessible hybrid filter with an approximate life of 5,000 hours between maintenance. Regularly clean the filter to ensure optimal airflow and prevent overheating. Replace the filter when necessary, following the instructions in the full service manual.

7.3 Generel rengøring

• Linse: Gently wipe the lens with a soft, lint-free cloth designed for optical surfaces.
• Casing: Use a soft, dry cloth to clean the projector casing. Brug ikke slibende rengøringsmidler eller opløsningsmidler.

8. Fejlfinding

Hvis du støder på problemer med din projektor, kan du se følgende almindelige problemer og løsninger:

9. Specifikationer

10. Garanti og support

For warranty information and technical support, please refer to the warranty card included with your product or visit the official Hitachi website. Keep your purchase receipt as proof of purchase for warranty claims. Do not attempt to repair the product yourself, as this may void your warranty.