Brugermanual til InFocus IN102 bærbar DLP-projektor

1. Introduktion

This manual provides essential information for the setup, operation, and maintenance of your InFocus IN102 Portable DLP Projector. The IN102 is designed for various presentation environments, including conference rooms and classrooms, offering a balance of performance and portability.

Nøglefunktioner omfatter:

• SVGA (800 x 600) native resolution, supporting up to UXGA (1600 x 1200).
• 2700 ANSI Lumens brightness (2200 lumens in Eco Mode) for clear images in various lighting conditions.
• 1500:1 contrast ratio for distinct visuals.
• DLP® technology with InFocus BrilliantColor™ for accurate color reproduction.
• 3D-ready capability for displaying 3D content.
• Lightweight design (approximately 5 pounds / 2.3 kg) for portability.
• Langtidsholdbar lamp and filter-free design for reduced maintenance.

2. Hvad er der i æsken

Upon unpacking, please verify that all the following items are included with your InFocus IN102 projector:

• InFocus IN102 Projector
• Strømledning
• VGA-kabel
• Bæretaske
• Fjernbetjening
• Sikkerhedsinstruktioner
• CD Quick Start/User Guide

3. Produktet er slutview

Figur 3.1: Forside View of the IN102 Projector. This image displays the projector's front, highlighting the projection lens and the primary ventilation grille.

Figur 3.2: Bagside View of the IN102 Projector. This image illustrates the back panel, featuring the power input, two VGA ports, S-Video, and Composite video inputs.

Figur 3.3: Øverst View of the IN102 Projector. This image shows the top surface, including the integrated control panel buttons and the manual focus/zoom adjustment rings.

Figur 3.4: Nederst View of the IN102 Projector. This image displays the underside, revealing the mounting points for ceiling installation and the adjustable feet for leveling.

4. Opsætning

4.1 Placering

Position the projector on a stable, flat surface or mount it securely. Ensure adequate ventilation around the projector, keeping clear of any obstructions to the air intake and exhaust vents. The distance from the screen will determine the image size. Adjust the projector's angle to minimize keystone distortion.

4.2 Tilslutning af strøm

1. Connect the power cord to the AC inlet on the rear of the projector.
2. Sæt den anden ende af netledningen i en jordet stikkontakt.

4.3 Tilslutning af videokilder

The IN102 offers multiple input options:

• VGA (Computer): Use the supplied VGA cable to connect your computer's VGA output to one of the VGA input ports (VGA1 or VGA2) on the projector.
• S-video: Connect devices with S-Video output (e.g., DVD players) to the S-Video port.
• Sammensat video: Connect devices with Composite video output (e.g., VCRs, older game consoles) to the Composite video port.

Sørg for, at alle kabler er korrekt tilsluttet, før du tænder projektoren.

5. Betjeningsvejledning

5.1 Tænd/sluk

1. For at tænde skal du trykke på Magt knappen på projektorens kontrolpanel eller fjernbetjeningen. Strømindikatorlampen lyser.
2. For at slukke skal du trykke på Magt knappen to gange. Projektoren vil gå i en afkølingscyklus, før den slukker helt. Tag ikke stikket ud af projektoren under afkølingscyklussen.

5.2 Valg af indgangskilde

Tryk på Kilde button on the projector or remote control to cycle through available input sources (VGA1, VGA2, S-Video, Composite) until your desired source is displayed.

5.3 Billedjustering

• Fokus og Zoom: Rotate the focus and zoom rings on the projector lens until the image is sharp and fills the screen as desired.
• Keystone korrektion: If the projected image appears trapezoidal, use the keystone correction function (usually via buttons on the control panel or remote) to adjust the image geometry to a rectangular shape.
• Lysstyrke og Kontrast: Access the on-screen display (OSD) menu to fine-tune brightness, contrast, and other image settings.

5.4 Eco-tilstand

Activate Eco Mode to extend lamp life and reduce power consumption. This mode is ideal for presentations in dimly lit environments. Refer to the OSD menu for Eco Mode activation.

5.5 3D-funktionalitet

The IN102 is 3D-ready. To project 3D content, ensure your source device is compatible and configured for 3D output, and use appropriate 3D glasses (sold separately). Consult your 3D source device's manual for specific setup instructions.

6. Vedligeholdelse

6.1 Lamp Udskiftning

Projektoren lamp har en begrænset levetid. Når lamp life indicator illuminates or the image brightness significantly decreases, the lamp needs replacement. The lamp door is conveniently located on the top of the projector for easy access, even when the unit is installed.

1. Power off the projector and allow it to cool completely for at least 30 minutes.
2. Tag netledningen ud.
3. Find og åbn lamp cover on the top of the projector.
4. Fjern forsigtigt den gamle lamp module and replace it with a new InFocus-approved lamp (SP-LAMP-060).
5. Fastgør lamp dæksel og sæt netledningen i.
6. Nulstil lamp timeren i projektorens OSD-menu.

6.2 Rengøring

The IN102 features a filter-free design, eliminating the need for filter cleaning or replacement. Periodically clean the projector's exterior with a soft, dry cloth. For the lens, use a lens cleaning cloth and solution specifically designed for optical surfaces.

6.3 Opbevaring

When not in use for extended periods, store the projector in its carrying case in a cool, dry environment, away from direct sunlight and extreme temperatures.

7. Fejlfinding

This section addresses common issues you might encounter with your InFocus IN102 projector.

7.1 No Image or Blank Screen

• Tjek forbindelser: Ensure all video cables (VGA, S-Video, Composite) are securely connected to both the projector and the source device.
• Select Correct Input: Brug Kilde button on the projector or remote to select the correct input channel corresponding to your connected device.
• Computerskærmindstillinger: If connecting a laptop, ensure its display output is enabled. On many Windows laptops, pressing the Fn key simultaneously with a function key (often F4, F5, F7, eller F8, indicated by a monitor icon) toggles between display modes (laptop only, projector only, or both).
• Projektor Lamp: Bekræft lamp indicator light. If it's red or blinking, the lamp skal muligvis udskiftes.

7.2 Projector Shuts Off Unexpectedly

• Overophedning: Ensure the projector's ventilation vents are not blocked. Excessive heat can cause the projector to shut down automatically to prevent damage. Allow the unit to cool down in a well-ventilated area.
• Lamp Problemer: An aging or faulty lamp can cause intermittent shutdowns. Consider replacing the lamp if it's nearing the end of its lifespan.
• Strømforsyning: Check the power cord connection and ensure the power outlet is functioning correctly.

7.3 Problemer med billedkvalitet

• Sløret billede: Adjust the focus ring on the projector lens.
• Distorted Image (Trapezoid): Use the keystone correction function to square the image.
• Poor Color/Brightness: Adjust brightness, contrast, and color settings via the OSD menu. Ensure the room lighting is appropriate for the selected display mode (e.g., Eco Mode for darker rooms).
• Resolution Mismatch: Ensure your source device's output resolution is compatible with the projector's native or supported resolutions.

7.4 Fjernbetjening virker ikke

• Batterier: Udskift batterierne i fjernbetjeningen.
• Synslinie: Ensure there is a clear line of sight between the remote control and the projector's IR receiver.

8. Specifikationer

9. Garanti og support

9.1 Begrænset garanti

All new DLP® projectors from InFocus, including the IN102, are backed by a comprehensive limited warranty:

• Projektor: 5 års begrænset garanti
• Dele og arbejde: 2-year coverage
• Lamp: 6-måneders begrænset garanti

Gem venligst dit købsbevis for garantikrav.

9.2 Kundesupport

For further assistance, technical support, or warranty inquiries, please refer to the contact information provided in your product's quick start guide or visit the official InFocus support webwebsted.