Creative Inspire S2 Bluetooth trådløst multimediehøjttalersystem brugermanual

Produkt overview

The Creative Inspire S2 Bluetooth Wireless Multimedia Speaker System provides high-quality audio through its two satellite speakers and a subwoofer, with the added convenience of Bluetooth wireless connectivity. This system is designed for use with computers and other Bluetooth-enabled devices, offering a versatile audio solution.

Image: The Creative Inspire S2 system, showing the central subwoofer unit, two compact satellite speakers, and a small USB Bluetooth transmitter. The satellite speakers are white with black grilles, and the subwoofer is black.

Kassens indhold

Kontroller, at alle komponenter er til stede i emballagen:

• To satellithøjttalere
• En subwoofer
• USB Bluetooth-sender
• Universal strømadapter
• Lynstartguide (se denne manual for detaljerede instruktioner)
• Warranty/Technical Support Leaflet

Opsætningsinstruktioner

1. Fysisk forbindelse

1. Placering: Place the subwoofer on the floor or a sturdy surface. Position the two satellite speakers on either side of your computer monitor or listening area for optimal stereo separation.
2. Tilslut satellithøjttalere: Connect the cables from the satellite speakers to the corresponding ports on the back of the subwoofer. Ensure a secure connection.
3. Tilslut strøm: Plug the universal power adapter into the subwoofer's power input, then connect the adapter to a wall outlet.

2. Bluetooth Connection (Wireless Audio)

For Computers (using included USB Bluetooth Transmitter):

1. Insert Transmitter: Plug the included USB Bluetooth transmitter into an available USB port on your computer. Your computer may automatically install necessary drivers.
2. Power On Speakers: Ensure the speaker system is powered on. The power button is typically located on one of the satellite speakers. A green light should indicate power.
3. Automatisk parring: The speaker system and USB transmitter should automatically pair. A blue light on the satellite speaker will indicate a successful Bluetooth connection.
4. Vælg lydudgang: On your computer, navigate to your sound settings and select the "Creative Inspire S2" or similar Bluetooth audio device as your default playback device.

For Other Bluetooth Devices (e.g., Smartphones, Tablets, Laptops with built-in Bluetooth):

1. Power Off Speakers: Ensure the speaker system is turned off.
2. Gå ind i parringstilstand: With the speakers off, press and hold the '+' (volume up) button on the satellite speaker. Continue holding until a blue light begins to flash rapidly. This indicates the speakers are in pairing mode.
3. Aktivér Bluetooth på enheden: Gå til Bluetooth-indstillingerne på din smartphone, tablet eller bærbare computer, og sørg for, at Bluetooth er aktiveret.
4. Select "Inspire S2": In the list of available devices, select "Inspire S2" (or similar). If prompted for a passcode, enter "0000" (four zeros).
5. Bekræft forbindelse: Once paired, the blue light on the satellite speaker will become solid, indicating a successful connection.

3. Wired Connection (Auxiliary Input)

The Inspire S2 system also supports a wired connection for devices without Bluetooth or for a direct audio link.

1. Tilslut lydkabel: Connect a 3.5mm audio cable (not included) from the audio output of your device (e.g., MP3 player, laptop headphone jack) to the "Audio In" port on the side of the satellite speaker.
2. Power On Speakers: Sørg for, at højttalersystemet er tændt.
3. Afspilning: Begin audio playback from your connected device. The system will automatically prioritize the wired input if a cable is connected.

Betjeningsvejledning

Tænd/sluk

• To power on the system, press the power button located on one of the satellite speakers. A green LED will illuminate.
• To power off, press the power button again. The LED will turn off.

Lydstyrkekontrol

• Use the '+' and '-' buttons on the satellite speaker to adjust the system's volume.
• You can also control the volume from your connected Bluetooth device or computer.

Lydafspilning

• Once connected via Bluetooth or auxiliary cable, simply start playing audio from your source device.
• Ensure the volume on both the speaker system and your source device is adjusted appropriately.

Opretholdelse

• Rensning: Use a soft, dry cloth to clean the surfaces of the speakers and subwoofer. Avoid using liquid cleaners or abrasive materials.
• Placering: Ensure the speakers are placed on stable surfaces to prevent accidental falls. Avoid placing them in direct sunlight, near heat sources, or in excessively humid environments.
• Ventilation: Do not block the ventilation openings on the subwoofer to ensure proper airflow and prevent overheating.
• Kabelstyring: Keep cables organized and untangled to prevent damage and tripping hazards.

Fejlfinding

Specifikationer

Garanti og support

For warranty information and technical support, please refer to the warranty/technical support leaflet included in your product packaging. You may also visit the official Creative webwebsted for de seneste supportressourcer, ofte stillede spørgsmål og kontaktoplysninger.

Online support: www.creative.com/support