1. Introduktion
Thank you for choosing the RUIGE A10 Automatic Mechanical Watch. This high-quality timepiece combines classic design with modern functionality, featuring a robust stainless steel construction, luminous display for night visibility, and water resistance. This manual provides essential information to help you understand, operate, and maintain your watch for optimal performance and longevity.
2. Opsætning og indledende vikling
2.1 Indledende vikling
Your RUIGE A10 watch is an automatic mechanical timepiece. This means it is powered by the natural motion of your wrist. When worn regularly (approximately 8-10 hours a day), it will self-wind and maintain power. If the watch has stopped or has not been worn for an extended period, it may require manual winding:
- Gently unscrew the crown (if it's a screw-down crown) and pull it out to the first position.
- Rotate the crown clockwise approximately 20-30 times to initiate the movement.
- Skub kronen tilbage på plads, og skru den godt fast for at sikre vandtæthed.
2.2 Time and Date Adjustment
The watch features multiple sub-dials for day, month, 24-hour time, and a date window. Adjustments are made using the crown and side buttons.
- Justeringstid: Pull the crown out to the second position. Rotate the crown to set the hour and minute hands. Push the crown back in when finished.
- Adjusting Month: Press the upper side button to advance the month.
- Adjusting Date: Press the lower side button to advance the date.
- Adjusting Day of Week: The day of the week is typically linked to the time adjustment. Advance the time past midnight to change the day.
Note: Avoid adjusting the date or day of the week between 9 PM and 3 AM, as this can damage the movement.
3. Betjeningsvejledning
3.1 Automatisk urværk
Your watch is equipped with an automatic self-winding mechanical movement. This movement is designed to be wound by the motion of your arm. When fully wound, the watch has a power reserve that allows it to run for a certain period (typically 36-48 hours) when not worn. If the watch stops, refer to the 'Initial Winding' section.
3.2 Lysende display
The watch features a high-definition luminous coating on its hands and hour markers. This coating absorbs light during the day and emits a glow in low-light conditions, allowing for clear time reading at night.
3.3 Vandtæthed
The watch has a water resistance rating of 3 Bar (30 meters). This means it is suitable for daily use and can withstand splashes or brief immersion in water. However, it is NOT recommended for swimming, diving, or showering, as water pressure and steam can compromise the seals.
4. Vedligeholdelse
Proper care will ensure the longevity and accuracy of your mechanical watch.
- Rensning: Wipe the watch regularly with a soft, dry cloth to remove dust and fingerprints. For the stainless steel band and case, a slightly damp klud kan bruges, efterfulgt af øjeblikkelig tørring.
- Undgå stød: Mechanical watches are delicate. Avoid dropping the watch or subjecting it to strong impacts.
- Magnetiske felter: Keep the watch away from strong magnetic fields (e.g., speakers, refrigerators, certain electronic devices), as magnetism can affect the accuracy of the movement.
- Ekstreme temperaturer: Avoid exposing the watch to extreme temperatures, both hot and cold, as this can affect the lubricants and components.
- Vandtæthed: Always ensure the crown is fully pushed in and screwed down (if applicable) to maintain water resistance. Do not operate the crown or buttons while the watch is wet or submerged.
- Service: Mechanical watches benefit from periodic servicing by a qualified watchmaker, typically every 3-5 years, to clean, lubricate, and adjust the movement.
5. Fejlfinding
- Watch has stopped running:
- As an automatic mechanical watch, it requires movement to stay wound. If it has stopped, manually wind it by rotating the crown clockwise 20-30 times. Ensure you wear it regularly to keep it powered.
- Tidspunktet er unøjagtigt:
- Mechanical watches are not as precise as quartz watches. A deviation of +/- 15-30 seconds per day is generally considered acceptable. If the deviation is significantly higher, ensure the watch is fully wound and has not been exposed to strong magnetic fields. If the problem persists, professional servicing may be required.
- Fugt eller kondens inde i uret:
- This indicates a breach in the watch's water resistance. Immediately take the watch to a professional watchmaker to prevent further damage to the movement. Ensure the crown was fully pushed in and screwed down (if applicable) before exposure to water.
6. Specifikationer
| Feature | Specifikation |
|---|---|
| Mærkenavn | RUIGE |
| Modelnummer | A10 |
| Bevægelse | Automatisk selvoptræk |
| Varetype | Mekaniske armbåndsure |
| Etui materiale | Legering |
| Case Form | Rund |
| Sags tykkelse | 12 mm |
| Skivediameter | 43 mm |
| Opkaldsvindue Materialetype | Hardlex (Mineral synthetic reinforced glass mirror) |
| Display Type | Analog with sub-dials (Week Pointer, December Display, 24-Hour Pointer, Date Window) |
| Båndmaterialetype | Rustfrit stål |
| Båndlængde | 21 cm |
| Båndbredde | 20 mm |
| Spændetype | Push Button Hidden Clasp (Double press butterfly buckle) |
| Vandmodstandsdybde | 3 bar (30 meter) |
| Funktioner | Luminous, Water Resistant |
| Watch Vægt | 147 g |
| Bevægelsens oprindelse | CN (Oprindelse) |
7. Brugertips
- For consistent accuracy, try to wear your automatic watch daily. If you rotate watches, consider a watch winder to keep it running and lubricated.
- When setting the time, always move the hands clockwise to avoid unnecessary strain on the movement.
- Regularly check that the crown is fully pushed in and secured, especially before any potential exposure to water.
8. Garanti og support
For any questions, concerns, or support regarding your RUIGE A10 watch, please contact the seller directly through the platform where you made your purchase. They will be able to assist you with product-specific inquiries and any potential warranty claims.
