1. Introduktion
The CIDOO QK61 V2 is a compact 60% layout mechanical keyboard designed for versatility and performance. It features tri-mode connectivity (wired, 2.4GHz wireless, and Bluetooth), VIA programmability for extensive customization, and a hot-swappable PCB for easy switch replacement. Built with a gasket structure and a PC plate, it offers a unique and satisfying typing experience. This manual provides detailed instructions for setting up, operating, and maintaining your CIDOO QK61 V2 keyboard.
2. Opsætning
2.1 Pakkens indhold
Før du begynder, skal du sørge for, at alle varer er til stede i din pakke:
- CIDOO QK61 V2 Mechanical Keyboard
- USB-C kabel
- Keycap aftrækker
- Aftrækker
- Transparent PC Keycaps (2 pieces)
2.2 Forbindelsestilstande
The QK61 V2 supports three connectivity modes: Wired, 2.4GHz Wireless, and Bluetooth. A mode switch is located next to the USB port on the keyboard.
2.2.1 Kablet tilstand
- Tilslut det medfølgende USB-C-kabel til tastaturet og din computer.
- Ensure the mode switch on the keyboard is set to the wired (USB) position.
- Tastaturet vil automatisk blive genkendt af dit system.
2.2.2 2.4 GHz trådløs tilstand
- Sæt 2.4 GHz USB-modtageren i en ledig USB-port på din computer.
- Set the mode switch on the keyboard to the 2.4GHz wireless position.
- Trykke FN + R on the keyboard to activate 2.4GHz pairing. The keyboard should connect automatically.
2.2.3 Bluetooth-tilstand
- Indstil tilstandsknappen på tastaturet til Bluetooth-positionen.
- Tryk og hold FN + Q, FN + W, eller FN + E for 3-5 seconds to enter pairing mode for Bluetooth device 1, 2, or 3 respectively. The indicator light will flash.
- On your device (PC, laptop, phone, tablet), search for Bluetooth devices and select "CIDOO QK61 V2" to pair.
- Once paired, the indicator light will stop flashing. You can switch between paired Bluetooth devices by pressing FN + Q, FN + W, eller FN + E kort.
2.3 Operativsystemkompatibilitet
The keyboard supports both Windows and Mac OS layouts.
- For Windows: Tryk FN + A
- For Mac OS: Press FN + S
3. Betjeningsvejledning
3.1 Basic Key Functions (60% Layout)
The 60% layout is compact, meaning some keys are accessed via function (FN) layer combinations. Refer to the keyboard's keycap legends or the VIA software for specific FN layer mappings. Common combinations include:
- FN + 1-0 (or other number keys) for F1-F10 functions.
- FN + P for F11, FN + [ for F12.
- FN + I for Print Screen, FN + O for Scroll Lock, FN + P for Pause.
- FN + ; til hjemmet, FN + ' for End.
- FN + / for Page Up, FN + Flytte + / for Page Down.
- FN + Højre skift for Up Arrow, FN + Højre Ctrl for Left Arrow, FN + Højre Alt for Down Arrow, FN + Right Fn for Right Arrow.
3.2 RGB-baggrundsbelysningskontrol
The QK61 V2 features 16.8M RGB backlighting with south-facing LEDs for vibrant and uniform illumination. Use the following key combinations to control the backlighting:
- FN + \ |: Toggle Light Mode (cycle through various RGB effects).
- FN + X: Toggle LOGO Light Color.
- FN + Backspace: Turn Backlights ON/OFF.
3.3 VIA Programmability
The QK61 V2 is fully VIA programmable, allowing you to customize key mappings, macros, and lighting effects. To use VIA:
- Download the VIA software from the official website (search for "VIA keyboard software").
- Connect your keyboard to your computer via USB-C cable.
- Open the VIA software. It should automatically detect your QK61 V2 keyboard.
- Use the intuitive interface to remap keys, create complex macros, and fine-tune your RGB lighting preferences across multiple layers.
4. Vedligeholdelse
4.1 Rengøring af dit tastatur
- **General Cleaning**: Use a soft brush or compressed air to remove dust and debris from between the keycaps.
- **Keycap Cleaning**: Gently remove keycaps using the provided keycap puller. Wipe them with a damp en klud og en mild sæbeopløsning om nødvendigt, og tør derefter grundigt, inden du sætter den på igen.
- **Case Cleaning**: Wipe the keyboard case with a soft, slightly damp klæde. Undgå skrappe kemikalier.
4.2 Udskiftning af tastehætte og kontakt
The QK61 V2 features a hot-swappable PCB, allowing you to easily change switches without soldering.
- **Removing Keycaps**: Use the keycap puller to gently pull keycaps straight up.
- **Removing Switches**: Use the switch puller to grasp the top and bottom clips of the switch and pull it straight out.
- **Installing Switches**: Align the pins of the new 3-pin or 5-pin mechanical switch with the holes on the PCB. Press down firmly until the switch clicks into place. Ensure the pins are not bent.
- **Installing Keycaps**: Align the keycap with the switch stem and press down gently until it is secure.
5. Fejlfinding
5.1 Forbindelsesproblemer
- **Keyboard not responding in wireless mode**: Ensure the mode switch is set correctly (2.4GHz or Bluetooth). Check if the keyboard battery is charged. For 2.4GHz, ensure the dongle is securely plugged in. For Bluetooth, ensure the keyboard is in pairing mode or connected to the correct profile (FN+Q/W/E).
- **Intermittent connection**: Try moving the keyboard closer to the receiver/device. Ensure there are no major obstructions or sources of interference (e.g., other wireless devices).
5.2 Taster reagerer ikke
- **Single key not working**: Carefully remove the keycap and then the switch using the switch puller. Inspect the switch pins for bends or damage. Reinsert the switch firmly, or try a different switch in that socket to determine if the issue is with the switch or the PCB socket.
- **Multiple keys not working**: Ensure the keyboard is properly connected in your chosen mode. Try switching to wired mode to rule out wireless issues. If the problem persists, a factory reset might be necessary (refer to VIA software for reset options).
5.3 Problemer med baggrundsbelysning
- **Backlights not turning on**: Ensure backlights are not turned off (FN + Backspace). Check brightness settings via VIA software.
- **Inconsistent lighting**: This could be due to software settings. Use VIA to reset or reconfigure lighting profiles.
5.4 VIA Software Issues
- **Keyboard not detected by VIA**: Ensure the keyboard is connected via USB-C cable. Close and reopen the VIA software. Make sure you have the latest version of VIA.
6. Specifikationer
| Feature | Detalje |
|---|---|
| Mærke | CIDOO |
| Model | QK61 V2 |
| Layout | 60 % |
| Forbindelse | Kablet (USB-C), 2.4 GHz trådløs, Bluetooth |
| Batteri | 3000mAh |
| Keycaps Profile | Kirsebær |
| Keycaps Material | Double Shot PBT with 2 Transparent PC Keycaps |
| Plademateriale | Polycarbonat (PC) |
| Monteringsstil | Pakningsmontering |
| Stabilisatorer | Pre-lubed Plate-mount stabilizers |
| Hot-swappable | Yes, compatible with 3-pin and 5-pin switches |
| RGB | Sydvendte LED'er |
| Dimensioner | 30.1cm (L) x 11.7cm (W) x 1.8-2.9cm (H) |
| Vægt | 0.62 kg |
| Skrivevinkel | Comfortable for long sessions |
| Afstemningsfrekvens | 1000Hz (Wired: 3ms, 2.4G: 5ms, BT: 15ms) |
6.1 CIDOO Pearl White Switch Specifications
| Feature | Detalje |
|---|---|
| Switch Type | Lineær |
| Fastgør konfiguration | 5 stifter |
| Pre-lube | Ja |
| Materiale | PC&PA66 Housing, POM Stem |
| Aktiveringskraft | 40 ± 5 gf |
| Bottom Force | 45 ± 5 gf |
| Før rejsen | 2.0 ± 0.3 mm |
| Samlet rejse | 3.6 ± 0.2 mm |
| Levetid | Over 500,000,000 keystrokes |
7. Brugertips
- **Battery Management**: To maximize battery life in wireless modes, turn off RGB lighting when not needed using FN + Backspace.
- **Customization**: Explore the full potential of VIA software to create personalized key layouts and macros for different applications or games.
- **Switch Experimentation**: Take advantage of the hot-swappable PCB to try different mechanical switches and find your preferred typing feel.
8. Garanti og support
For warranty information, technical support, or any product-related inquiries, please contact the seller or manufacturer directly through their official support channels. Keep your proof of purchase for warranty claims.
