1. Introduktion
The DeepCool CK-11508 is a compact, low-profile air-cooled CPU radiator designed to efficiently dissipate heat from your processor. It is compatible with various Intel LGA sockets, including 1150, 1151, 1155, 1156, and 1200. This manual will guide you through the installation, operation, and maintenance of your new CPU cooler to ensure optimal performance and longevity.
Figure 1: DeepCool CK-11508 CPU Cooler Overview
2. Specifikationer
Se tabellen nedenfor for detaljerede produktspecifikationer:
Figur 2: Detaljerede produktspecifikationer
| Feature | Detalje |
|---|---|
| Modelnummer | DeepCool CK-11508 |
| Kølertype | Lav Profile Luftkøler |
| Dimensioner (L×B×H) | 95 mm × 95 mm × 69.5 mm |
| Blæserhastighed | 2200 ± 10 % RPM |
| Luftstrøm | 40.9 CFM |
| Leje Type | Hydraulisk leje |
| Nominel voltage | 12V DC |
| Limit Height | 70 mm |
| Kontakt Surface | Aluminum Bottom |
| Fan Blade Quantity | 7 |
| Power interface | 3-polet ventilatorstik |
| Understøttede CPU-sokler | Intel LGA 1150, LGA 1151, LGA 1155, LGA 1156, LGA1200 |
| TDP (Cooler Power Consumption) | 0W |
| Pakkevægt | 0.26 kg |
| Pakkedimensioner | 24 cm (L) x 14 cm (B) x 10 cm (H) |
3. Pakkens indhold
- DeepCool CK-11508 CPU Cooler (with integrated fan)
- Intel Base Mounting Kit (1 set)
- Silicone Grease (Thermal Paste) (1 unit)
4. Installationsvejledning
Please follow these steps carefully to install your DeepCool CK-11508 CPU Cooler:
- Forbered bundkortet: Ensure your motherboard is removed from the PC case or has sufficient space around the CPU socket. Identify the CPU socket (LGA 1150/1151/1155/1156/1200).
- Install CPU (if not already installed): Carefully place your Intel CPU into the motherboard socket, aligning the notches. Close the retention arm.
- Påfør termisk fedt: If your CPU does not have pre-applied thermal paste, or if the cooler's contact surface does not have it, apply a small pea-sized amount of the provided silicone grease to the center of the CPU's integrated heat spreader (IHS). Do not spread it manually; the pressure from the cooler will distribute it evenly.
- Placering af køleren: Carefully align the four mounting pins on the cooler's base with the four holes around the CPU socket on the motherboard. Ensure the fan cable is oriented towards the CPU_FAN header on your motherboard for easy connection.
- Fastgør køleren: Press down firmly on each of the four push-pins until they click into place. You should hear a distinct click for each pin, indicating it is properly secured. Gently tug on the cooler to ensure it is firmly attached and does not wobble.
- Tilslut ventilatorstrøm: Locate the 3-pin fan connector cable from the cooler. Connect this cable to the 'CPU_FAN' header on your motherboard. Ensure the connector is fully seated.
Figure 3: Cooler with mounting pins visible
Figure 4: Cooler contact surface (apply thermal paste here if not pre-applied)
5. Betjeningsvejledning
Once installed, the DeepCool CK-11508 CPU Cooler operates automatically. The fan speed is fixed at approximately 2200 RPM to provide consistent cooling performance for your CPU. Ensure your system's BIOS/UEFI settings are configured to monitor the CPU fan speed and temperature.
6. Vedligeholdelse
Regular maintenance helps ensure optimal cooling performance and extends the lifespan of your cooler:
- Fjernelse af støv: Periodically (every 3-6 months, or more frequently in dusty environments) use compressed air to blow dust out of the heatsink fins and fan blades. Hold the fan blades gently to prevent over-spinning during cleaning.
- Tjek forbindelser: Ensure the fan power cable remains securely connected to the motherboard's CPU_FAN header.
- Termisk pasta: If you notice a significant increase in CPU temperatures over time, consider reapplying thermal paste. This typically involves removing the cooler, cleaning off old thermal paste from both the CPU and cooler base, and applying new thermal paste.
7. Fejlfinding
If you encounter issues with your CPU cooler, refer to the following troubleshooting tips:
- Ventilatoren drejer ikke:
- Check if the 3-pin fan cable is securely connected to the CPU_FAN header on the motherboard.
- Sørg for, at systemet er tændt.
- Inspect the fan for any obstructions (e.g., loose cables) preventing it from spinning.
- Høje CPU-temperaturer:
- Verify that the cooler is properly seated and secured to the CPU, with all four push-pins locked.
- Confirm that thermal paste was applied correctly between the CPU and the cooler's base.
- Rengør eventuelt støv fra kølepladens finner og ventilatorblade.
- Sørg for tilstrækkelig luftgennemstrømning i dit pc-kabinet.
- Usædvanlig støj:
- Check for loose cables or other components touching the fan blades.
- Ensure the fan is securely mounted and not vibrating against the heatsink.
8. Brugertips
- Monteringshardware inkluderet: The DeepCool CK-11508 comes with all necessary mounting hardware for Intel LGA 115x/1200 sockets, including the Intel base and silicone grease, so you won't need to purchase these separately.
- Lav Profile Design: Its compact 69.5mm height makes it suitable for smaller PC cases or systems with limited clearance.
9. Garanti og support
For garantioplysninger, teknisk support eller serviceforespørgsler bedes du kontakte din forhandler eller producenten direkte. Gem din købsbevis til garantikrav.
