D-Link DES-1005C 5 Port 10-100 Base TX Unmanaged Switch Installation Guide

DES-1005C 5 Port 10-100 Base TX Unmanaged Switch

Specifications:

  • Model: D-Link DES-1005C
  • Ports: 5 x 10/100Base-TX
  • Interface Connectors: Ports 1-5, DC Power Input
  • LED Indicators: Power (per device), Link/Activity (per
    port)

Product Usage Instructions:

Package Contents:

Open the shipping carton and unpack the following items:

  • DES-1005C Switch
  • Power Adapter
  • Quick Installation Guide
  • Warranty Card

Hardware Overview:

Interface Connectors:

Ports 1-5 are 10/100Base-TX ports. Use the provided DC Power
Input for the power adapter.

LED Indicators:

Description LED Status
Power (per device) On – Power on, Off – Power off
Link/Activity (per port) Solid light – Connection to an Ethernet device, Blinking – The
port is receiving or transmitting data, Off – No connection

Product Setup:

  1. Do not stack any device on top of the
    switch.
  2. Connecting the D-Link DES-1005C to Your
    Network:

A. POWER: Plug the DC power jack into the power
port of the DES-1005C, then plug the other end of the AC power cord
into a free outlet or surge protector. The Power LED will
illuminate confirming that the device has powered up
successfully.

B. FAST ETHERNET PORTS (PORTS 1-5): These ports
offer network speeds of either 10 Mbps or 100 Mbps and can operate
in half or full-duplex transfer modes. They support automatic
MDI/MDIX crossover, eliminating the need for crossover cables or
uplink ports. Connect each port directly to a server, hub, router,
or switch using regular straight-through twisted-pair Ethernet
cables.

Setup and Configuration Problems:

  1. WHAT SHOULD I DO IF THE POWER LED DOES NOT LIGHT
    UP?

    Check if the power adapter is connected properly to the outlet or
    surge protector and the side of the device.
  2. WHAT SHOULD I DO IF A CONNECTED DEVICE IS NOT
    DETECTED?

    Ensure the Port LED is illuminated or flashing. If not, try using a
    new Ethernet cable.

FAQ:

Q: What happens if I use a power adapter with a different
voltage than recommended?

A: Using a power adapter with a different voltage than
recommended will cause damage and void the warranty for the
product.

D-Link DES-1005C
5-Port 10/100Base-TX Unmanaged Switch 5 10/100Base-TX
Quick Installation Guide

Package Contents
Open the shipping carton of the switch and carefully unpack its contents. The carton should contain the following items:
DES-1005C Switch Power Adapter Quick Installation Guide Warranty card
Note: Using a power adapter with a different voltage than the one recommended for the device will cause damage and void the warranty for this product.

Hardware Overview
Interface Connectors
Connector Ports 1-5 DC Power Input

LED Indicators

LED Power (per device)
Link/Activity (per port)

Status Solid light Off Solid light Blinking Off

Description 10/100Base-TX ports. Input jack for the power adapter.
Table 1
Description Power on. Power off. Connection to an Ethernet device. The port is receiving or transmitting data. No connection.
Table 2

Product Setup
Please follow the steps below to set up the switch: 1. Install the DES-1005C in a cool and dry place. Refer to the Technical Specifications for the acceptable operating temperature and humidity ranges. 2. Install the switch in a site free from strong electromagnetic source, vibration, dust and direct sunlight. 3. Leave at least 10 cm of space at the left and right-hand side of the switch for ventilation. 4. Visually inspect the power jack and make sure that it is fully secured to the power adapter.

2

Note: Do not stack any device on top of the switch.
Connecting the D-Link DES-1005C to Your Network
A. POWER Plug the DC power jack into the power port of the DES-1005C, then plug the other end of the AC power cord into a free outlet or surge protector. The Power LED will illuminate confirming that the device has powered up successfully.
B. FAST ETHERNET PORTS (PORTS 1-5) These ports offer network speeds of either 10 Mbps or 100 Mbps and can operate in half or full-duplex transfer modes. These ports also support automatic MDI/MDIX crossover, eliminating the need for crossover cables or uplink ports. Each port can be connected directly to a server, hub, router, or switch using regular straight-through twisted-pair Ethernet cables.
Setup and Configuration Problems
1. WHAT SHOULD I DO IF THE POWER LED DOES NOT LIGHT UP? – Check if the power adapter is connected properly to the outlet or surge protector and the side of the device. 2. WHAT SHOULD I DO IF A CONNECTED DEVICE IS NOT DETECTED? – Ensure the Port LED is illuminated or flashing. If not, try using a new Ethernet cable.
3

, , ,
. , , . (/ ), , . , , , . . . . 0 +40 °. . , . , . . ! . . / / . . , . . , . ­ . .
­ 2 .
c . 2 , 6 () 7 () , . : G – 2016, H – 2017, I – 2018, J – 2019, 0 – 2020, 1 – 2021, 2 – 2022, 3 – 2023, 4 – 2024, 5 – 2025. : 1 – , 2 – , …, 9 – , A – , B – , – .
D-Link.
4

. , . – , .
DES-1005C
: .

1-5

10/100Base-TX.
.

1

Power ( )
Link/Activity ( )

. . . . .

2

: 1. DES-1005C . 2. , , , . 3. 10 . 4.
5

. : – .
DES-1005C
A. DES-1005C . , .
. FAST ETHERNET ( 1-5) 10 / 100 / . , MDI/MDIX, uplink-. , , Ethernet- .

1. , ? – , . 2. , ? – , . , Ethernet-.
6

· 5 10/100Base-TX

· Power ( ) · Link/Act ( )

· ( )

· IEEE 802.3 10Base-T · IEEE 802.3u 100Base-TX · IEEE 802.3az Energy-Efficient Ethernet (EEE) · IEEE 802.3az Energy-Efficient Ethernet · MDI/MDIX · -/ 10/100 / · «Back pressure» ·

· Ethernet: 10 / () / 20 / ( ) · Fast Ethernet: 100 / () / 200 / ( )

· 1 /

· Store-and-forward

MAC

· 2K

. 64

· 0,74 Mpps

RAM

· 96

Jumbo-

· 2 048

( x x )

· 87 x 47 x 21

· 43,4

· : – : 5 , 0,55

.

· 0,784

· 0,4

· 0,12 (0,406 /)

MTBF ()

· 1 785 631

· 0

7

· : 0 40 °C · : -40 70 °C · : 10% 90% · : 5% 95%
· CE Class B · CE (LVD 2006/95/EC)

8

– D-Link. D-Link . D-Link . D-Link , . .
D-Link: 8-800-700-5465
: http://www.dlink.ru e-mail: support@dlink.ru
: – , 11494, , , , 3-, 289 , : “- ” 390010, . , . , .16 .: +7 (4912) 575-305 : , , 14 .: +7 (495) 744-00-99 e-mail: mail@dlink.ru
, – , 169 .: +375 (17) 218-13-65 e-mail: support@dlink.by
, -c,143 .: +7 (727) 378-55-90 e-mail: almaty@dlink.ru
1.0 2025-07-24
9

Documents / Resources

D-Link DES-1005C 5 Port 10-100 Base TX Unmanaged Switch [pdf] Installation Guide
DES-1005C 5 Port 10-100 Base TX Unmanaged Switch, DES-1005C, 5 Port 10-100 Base TX Unmanaged Switch, 10-100 Base TX Unmanaged Switch, Base TX Unmanaged Switch, TX Unmanaged Switch, Unmanaged Switch, Switch

References

Leave a comment

Your email address will not be published. Required fields are marked *