D-BOX 242-914-0028 HapticSync Hub User Guide
Contents
hide
Each Haptic Seat Package Includes
- 1x D-BOX Haptic Seat (at least)
- 1x Power Cord
- 1x IEC Plug-Lock Insert
- 3 or 4x Stabilization Cups (varies per model)
- 1x CAT.5E Shielded Cable
HaptiSync Hub Package Includes
- 1x HaptiSync Hub
- 1x Antenna
- 1x Power Cord
Prepare your Haptic Seat
- Follow the manufacturer’s instructions to assemble your Haptic Seat.
- Insert the IEC plug lock on the female end of the power cord and connect it.
- Install the stabilization cups underneath your Haptic Seat:
- Make sure nothing will be pinched or damaged while the Haptic Seat is moving.
Prepare your HaptiSync Hub
- Screw the antenna on the back of your HaptiSync Hub. Place the antenna upwards for optimal reception.
- Install your HaptiSync Hub on a flat surface with sound sensor toward your front speakers. Ensure it is located in an optimal location to maximize sound reception performance.
- Connect the HaptiSync Hub to the Haptic Seat using the CAT.5E shielded cable provided with the seat. See other side of this page or the user manual for specific wiring diagrams.
- Connect the power cable to your HaptiSync Hub
HaptiSync Configuration
- Go to the D-BOX Connect website: https://connect.d-box.com
- Create an account using a valid email address.
- Follow HaptiSync Configuration instructions on D-BOX Connect website.
D-BOX LIFESTYLE & LIVING MODELS BY JAYMAR EXPERIENCE
HAPTISYNC HUB
HAPTIC SEAT
OTHER CUSTOM HAPTIC SYSTEMS
HAPTISYNC HUB
GEN-1 HAPTIC SYSTEM
Documents / Resources
 |
D-BOX 242-914-0028 HapticSync Hub [pdf] User Guide 242-914-0028, HapticSync Hub, 242-914-0028 HapticSync Hub |
