cybex SOLUTION G2 Car Seat User Guide

The Solution G2 is an i-Size booster seat approved for i-Size
compatible vehicle seating positions per UN Regulation No. R129/04.
Check your vehicle’s compatibility with the provided list.

Retract ISOFIX-locking arms for use with automatic three-point
seat belts. Refer to the vehicle type list for ISOFIX-approved
vehicles.

Maintenance and Care

Use original CYBEX seat cover for optimal function.
Avoid direct sun exposure to prevent burns.

Inspect for damage after an accident; replace if
necessary.
Clean with water only; avoid harsh cleaning agents.

Protect vehicle seats from marks with a blanket under the car
seat.

Product Parts

(1) Adjustment Handle

(2) Backrest
(3) Carrying Handle

(4) Booster
(5) ISOFIX Locking Arms

(6) ISOFIX Anchorage Points
(7) ISOFIX Safety Indicator

(8) ISOFIX Release Buttons
(9) Adjustable Headrest

(10) Headrest Height Adjuster
(11) Lap Belt Guide

(12) Shoulder Belt Guide
(13) Linear Side-impact Protection (L.S.P.)

(14) Side Impact Protection Release Button
(15) Reclining Headrest
(16) User Guide Storage Compartment

Frequently Asked Questions (FAQ)

Q: Can the Solution G2 be used without ISOFIX?

A: Yes, you can use the car seat with automatic three-point seat
belts by retracting the ISOFIX-locking arms.

Q: How do I clean the Solution G2 car seat?

A: Clean with water only. Avoid harsh cleaning agents or
bleaches to maintain the quality of the material.

Q: What should I do if the belt whip is too long?

A: If the belt whip is too long, the car seat may not be
suitable for use in that position. Contact the child restraint
manufacturer for guidance.

“`

View Fullscreen

SOLUTION G2
UN R129/04, 100 cm 150 cm
User guide

EN Tutorial video KO
EN Short Instruction KO

EN 1 KO

9 15

10 12

14 2 4 1
16
2

11 6

max. 2 cm

i-Size Booster Seat 100 cm – 150 cm

1 2

EN English

EN CERTIFICATION UN R129/04 CYBEX Solution G2 Size: 100 cm 150 cm Age: from approx. 3 years to approx. 12 years
Thank you for deciding on the Solution G2 when choosing your car seat. Carefully read this user guide before installing the car seat in your vehicle and always keep it to hand for future reference.
IMPORTANT INFORMATION
· Without the approval of the Type Approval Authority, the car seat may not
be modified or added to in any way.
· In order to keep your child properly protected, it is absolutely essential that
you use the car seat as described in this manual.
· This car seat may only be installed on vehicle seats which are approved for
the use of child restraint systems according to the vehicle manual.
· Only suitable for vehicle seats with automatic three-point belts approved in
accordance with UN Regulation No. 16 or a comparable standard.
· Do not use any load bearing contact points other than those described in
the instructions and marked on the child restraint.
· The backrest of the car seat must make contact with the backrest of
the vehicle.
· The shoulder belt must run upwards and back at a recline. It must never run
forward to the upper belt point in your vehicle.
· The vehicle belt buckle must never cross the belt guide of the seat.
If the belt whip is too long, the car seat is not suitable for use in this position in the vehicle. In case of doubt please contact the child restraint manufacturer.
· The three-point belt must only be passed through the designated routings.
The belt routings are described in detail in this manual and are marked in green on the car seat.
· The lap belt must run as low as possible across your child’s groin to have
optimum effect in the event of an accident.
· Before each use make sure that the automatic three-point vehicle belt is
correctly adjusted and fits tightly to the child’s body. Never twist the belt!
· Only an optimally adjusted headrest can offer your child maximum
protection and comfort while ensuring that the shoulder belt can be fitted smoothly.
2

· The car seat must always be secured correctly in the vehicle even when
not in use.
· Always ensure that the car seat is not jammed when closing the car door or
adjusting the back seat.
· The car seat is also tested and homologated without the Linear Side-
impact Protectors.
· Luggage or any other objects present in the vehicle must always be firmly
secured. Otherwise, they may be thrown within the car, which could cause fatal injuries.
· The car seat must never be used without the seat cover. Ensure that only
an original CYBEX seat cover is used, as the cover is a key element of the seat’s function.
· Never leave your child unattended in the car. · The parts in the child restraint system heat up in the sun and could
potentially burn your child’s skin. Protect your child and the car seat from direct sun exposure.
· An accident may cause damage to the car seat that is not identifiable with
the naked eye. Please replace the seat after an accident. In case of doubt, please consult your dealer or the manufacturer.
· Do not use this car seat for more than 9 years. The car seat is exposed
to high stress during its product life span, which leads to changes in the quality of the material with increasing age.
· The plastic parts can be cleaned with a mild cleaning agent and warm
water. Never use harsh cleaning agents or bleaches!
· On some vehicle seats made of sensitive materials, the use of car seats
may leave marks and/or cause discolouration. To prevent this, you can place a blanket or towel or similar underneath the car seat to protect the vehicle seat.

PRODUCT PARTS 1

(1) Adjustment Handle (2) Backrest (3) Carrying Handle (4) Booster (5) ISOFIX Locking Arms (6) ISOFIX Anchorage Points (7) ISOFIX Safety Indicator (8) ISOFIX Release Buttons (9) Adjustable Headrest

(10) Headrest Height Adjuster (11) Lap Belt Guide (12) Shoulder Belt Guide (13) Linear Side-impact
Protection (L.S.P.) (14) Side Impact Protection
Release Button (15) Reclining Headrest (16) User Guide Storage Compartment

THE CORRECT POSITION IN THE VEHICLE

This is an i-Size booster seat Enhanced Child Restraint System. It is approved according to UN Regulation No. R129/04, for use in i-Size compatible vehicle seating positions as indicated by vehicle manufacturers in their vehicle user guides. If your vehicle does not have an i-Size seating position, please check the vehicle type list. You can obtain the most up-to-date version from go.cybex-online.com/solution-g2-car-compatibility.
With retracted ISOFIX-locking arms the car seat can be used on vehicle seats which are equipped with an automatic three point belt. For using ISOFIX please refer to the vehicle type list for approved vehicles.
1 Above a child’s stature of 135cm, the compatibility between the car seat
and your vehicle might be reduced.

Please check the vehicle type list whether the car seat can be used without restriction in all headrest positions. In exceptional cases, the car seat may also be used on the front passenger seat. Always comply with the recommendations of the vehicle manufacturer.

CARRY AND UNFOLD THE CAR SEAT 2
The car seat can be folded for carrying. Pull the adjustment handle (1) and fold down the backrest (2) until it clicks into place with an audible “CLICK”.
1 Ensure that before folding the car seat the cup holder, if installed on the
car seat, has been removed.
Use the carrying handle (3) located on the back of the car seat to carry it. To unfold the car seat, pull the adjustment handle (1) and open the backrest (2) until it clicks into place with an audible “CLICK”.

INSTALLING THE CAR SEAT IN THE VEHICLE 3,4

1. Always ensure that…

· the backrests in the vehicle are locked in their upright position.

· when installing the child seat on the front passenger seat, adjust the vehicle seat as far back as possible without affecting the belt routing.

2. Use the adjustment handle (1) under the booster (4) and pull the two ISOFIX-locking arms (5) to their furthest extent.

3. Now twist the ISOFIX-locking arms (5) 180° so that they are facing the direction of the ISOFIX-anchorage points (6).

4. Place the car seat on the appropriate seat in the car.

5. Push the two ISOFIX-locking arms (5) into the ISOFIX-anchorage points (6) until these lock into place with an audible “CLICK”.

6. Use the adjustment handle (1) and push the car seat against the vehicle seat until it is fully aligned with the backrest.

1 If the headrest of the vehicle is in the way, pull it upwards to its furthest
extent or remove it completely (except in rear-facing vehicle seats).

7. Ensure the seat is secure by trying to pull it out of the ISOFIX-anchorage points (6). The green safety indicators (7) must be clearly visible on both sides of the seat.
8. In case the seat is used without ISOFIX, it can be stored away on the bottom of the seat.
1 By using ISOFIX, a connection to the vehicle is created which increases
your child’s safety. Your child still needs to be secured with the three-point belt of the vehicle.

REMOVING THE CAR SEAT FROM THE VEHICLE 3,4 Perform the installation steps in the reverse order. 1. Unlock the ISOFIX Locking Arms (5) on both sides by pushing the ISOFIX
Release Buttons (8) and pulling them back simultaneously. 2. Pull the seat away from the ISOFIX Anchorage Points (6). 3. Remove the car seat and push the ISOFIX Locking Arms (5) fully back into
the transport position.
ADJUSTING THE HEADREST 6,7 The Adjustable Headrest (9) can be adjusted by using the Headrest Height Adjuster (10) at the back of the headrest (9). Adjust the headrest so that max. 2 cm remain between the child’s shoulder and the headrest.
1 The height of the headrest can still be adjusted while the car seat is
installed in the car.
3

EN CORRECT INSTALLATION MODE
100 cm 150 cm
SECURING THE CHILD 8,9 1. Route the vehicle seat belt around your child and insert the belt tongue into
the belt buckle. It must lock into place with an audible “CLICK”. 2. Place the lap belt in the green coloured lap belt guides (11) of the car seat. 3. Pull the lap belt tight. 4. On the side of the car seat next to the belt buckle, the shoulder belt and the
lap belt must be inserted together in the lap belt guide (11). 5. Feed the shoulder belt through the shoulder belt guide (12) until it is inside
the belt guide. 6. Pull the shoulder belt tight. 7. Ensure that the shoulder belt runs across your child’s clavicle and does not
touch your child’s neck. If necessary, adjust the height of the headrest (9) to change the position of the belt.
ADJUSTING THE RECLINE POSITIONS 5 This car seat offers various sitting positions. 1. To put the car seat in the desired recline position, press the adjustment
handle (1) on the underside of the front area of the booster (4) and pull the car seat forward. 2. To return the car seat from the recline position to the sitting position, press the adjustment handle (1) again and guide the seat upwards with light pressure against the booster (4).
1 The car seat has to be adjusted to one of the sitting positions before the
child is seated.

LINEAR SIDE-IMPACT PROTECTION (L.S.P.) 10 If the Linear Side-impact Protection (L.S.P.) (13) is in conflict with the car door or if it affects the amount of space left on the passenger seat, it is possible to detach it. To do so, press the side impact protection release button (14). To reach this button, the cover of the backrest (2) needs to be removed. To reattach the L.S.P. (13) to the car seat, follow the removal instructions in the reverse order.
RECLINING HEADREST 6 The reclining headrest (15) helps to prevent the child’s head from dangerously tipping forward during sleep. It can be set on two positions. To adjust the reclining headrest (15), lift it and slide it forward or backward to the desired position.
1 The child’s head should always be in contact with the reclining headrest.
REMOVING AND REATTACHING THE SEAT COVER
The cover of the car seat consists of four parts (headrest (x2), backrest, booster). These are held in position at several places by press studs, velcro and elastic bands. Once all attachments have been released, the single parts of the cover can be removed. In order to put the covers back on the seat, follow the removal instructions in the reverse order.
1 The cover may only be washed at 30 °C with a delicate wash program
otherwise it may result in discoloration of the cover fabric. Please wash the cover separately from other laundry and do not dry in the dryer or in direct sunlight!
MANUFACTURER’S WARRANTY AND DISPOSAL REGULATIONS
CYBEX GmbH (Riedingerstr. 18, 95448 Bayreuth, Germany) gives you years warranty on this product. The warranty is valid in the country, where this product was initially sold by a retailer to a customer. The contents of the warranty and all essential information required for the assertion of the warranty can be found on our homepage go.cybex-online.com/manufacturer-warranty-car-seats. If a warranty is shown in the article description, your legal rights against us for defects remain unaffected. Please observe the waste disposal regulations in your country.

UN R129/04 CYBEX Solution G2 : 100 cm 150 cm : 3 12
Solution G2 . , (16) .

· , . · .
.
· () i-Size
.
· ECE R16, KS R4027
3 .
· ()
.
· () . ·
( ) . .
· .
, . .
· 3
. , .
·
.
· 3
. !

· KO
, .
·
.
· ,
.
· (L.S.P.)
.
·
. .
· .
.
· . ·
. . (, ).
· .
. .
·
9. 9 . , .
· .
.
· (, , )
, . .
5

KO 1

(1)

(10)

(2)

(11)

(3)

(12)

(4)

(13) (L.S.P)

(5) ISOFIX (6) ISOFIX (7) ISOFIX (8) ISOFIX

(14)
(15) (16)

(9)

UN R129/04 `i-Size ‘ . i-Size . i-Size , . go.cybex-online.com/solution-g2-car-compatibility .

ISOFIX 3 , .

ISOFIX(i-Size) .

1 (_, ) 135cm
, .

.
, . .

/ 2
. (1) (2) ” ” .
1 ( ) (9)
. .

(3) . (1) (2) “” .

3,4
1. . . · .
. · ,
. 2. (4) (1) ISOFIX
(5) . 3. ISOFIX (5) 180° ISOFIX (6) . 4. i-Size . 5. ISOFIX (5) ISOFIX (6) “”
. 6. (1) .
(), () .
1 ,
. ( )
7. ISOFIX (6) (4) . ISOFIX (7) .
8. ISOFIX , ISOFIX .
1 ISOFIX .
3 .
3,4
. 1. ISOFIX (8) ISOFIX (5)
. 2. ISOFIX (6) . 3. ISOFIX (5)
.
6,7
(9) (10) . 2cm (, ) .

1 .

100 cm 150 cm
8,9 1. 3
. “” . 2. (11) . ( .) 3. . 4. (11) . 5. (12) . 6. . . 7. . , (9) .
5 . 1. . (4)
(1) ( ) . 2. (1) (4) .
1 ,
() .

(L.S.P.) 10

(L.S.P.)(13) . (L.S.P.) , (14) . (L.S.P.) (13) .

6
(15) . 2 . (15) .
1 .

4( , , , , , .
. .
1 30°C . 30°C
. !

3 .
1. . (www. cybex-shop.co.kr) 30 . .
2. A/S
1) ()MK
2) , , , (www.cybex-shop. co.kr) 30
3) A/S
4)

3. A/S

3) ,

4) ( , )

5) .

6) , ,

4. A/S

1) 3

2) 3 ( )

4) ,

1) 7 .

2) 7 . (7 )

3) .

, . . .
.

REVISION INDEX

Pos. Document code

Version Date of issue

CY_172_1732

01.2025

CY_172_1732

04.2025

CYBEX GmbH Riedingerstraße 18 · 95448 Bayreuth, Germany +49 (0) 921-78 511 – 0 · info@cybex-online.com
cybex-online.com
Cet appareil et ses accessoires se recyclent
Points de collecte sur www.quefairedemesdechets.fr

CY_172_1732_B0425

Documents / Resources

cybex SOLUTION G2 Car Seat [pdf] User Guide
SOLUTION G2 Car Seat, SOLUTION G2, Car Seat, Seat

References

User Manual

cybex SOLUTION G2 Car Seat User Guide

SOLUTION G2 Car Seat

Product Specifications

Product Usage Instructions

Important Information

Positioning in the Vehicle