SLAclite 1x4FT LED Flat Panel Light (Model B0FDF9BFYD, 2-Pack) Instruction Manual

1. Cynnyrch Drosview

The SLAclite 1x4FT LED Flat Panel Light is designed for various indoor applications, offering adjustable brightness and color temperature. This fixture provides efficient and uniform illumination, suitable for offices, garages, kitchens, and other commercial or residential spaces. Key features include selectable wattage (24W/30W/40W), 5 CCT options (3000K/3800K/4500K/5200K/6000K), and smooth 10-100% Triac dimming.

SLAclite 1x4FT LED Flat Panel Light highlighting key features like ETL certification, wattage selectable, Triac dimming, 5CCT selectable, ultra-slim design, and surface/ceiling dual mount. — Figure 1: SLAclite 1x4FT LED Flat Panel Light with key features.

This LED panel light is engineered for energy efficiency, providing up to 5200 lumens of brightness while consuming significantly less power than traditional lighting. Its slim profile and flicker-free design contribute to a comfortable and productive environment.

2. Gwybodaeth Bwysig am Ddiogelwch

Please read all instructions carefully before installation and operation. Failure to follow these instructions may result in electric shock, fire, or other hazards.

Diogelwch Trydanol: Always turn off power at the circuit breaker before installing, servicing, or cleaning the fixture. Ensure proper grounding to avoid electrical shock.
Trydanwr Cymwys: Dylai trydanwr cymwys gyflawni'r gosodiad yn unol â'r holl godau trydanol lleol a chenedlaethol.
Cyftage: This fixture is designed for 120V/60Hz electrical systems. Do not connect to any other voltage.
Mowntio: Ensure the mounting surface can support the weight of the fixture. Use appropriate hardware for the ceiling type (cement, wood, drywall).
Defnydd Dan Do yn Unig: This product is rated for indoor use only. Do not expose to moisture or outdoor elements.
Gwres: Do not cover the fixture with insulating material. Ensure adequate airflow around the fixture.
Difrod: Peidiwch â defnyddio'r gosodiad os yw wedi'i ddifrodi. Cysylltwch â chymorth cwsmeriaid i gael cymorth.

3. Beth sydd yn y Bocs

Gwiriwch fod yr holl gydrannau yn bresennol cyn dechrau'r gosodiad:

1x4 LED Flat Panel Lights (2 units)
Plât Mowntio
Mounting Screw Kit (includes wire nuts, fastening clips, expansion tubes, M4x25MM screws, M4x30MM screws, M4x60MM screws)

Diagram showing the dimensions of the 1x4 LED Flat Panel Light (46.85 x 11.93 x 1.3 inches) and a detailed list of included mounting accessories: 3 wire nuts, 4 fastening clips, 4 expansion tubes, 2 M4x25MM screws, 4 M4x30MM screws, and 4 M4x60MM screws. — Figure 2: Product dimensions and included mounting accessories.

4. manylebau

Nodwedd	Manyleb
Rhif Model	B0FDF9BFYD
Dimensiynau (L x W x H)	46.85" x 11.93" x 1.3" (1190mm x 303mm x 33mm)
Wattage	Dewisadwy: 24W / 30W / 40W
Disgleirdeb	Hyd at 5200 Lumens (ar 40W)
Tymheredd Lliw (CCT)	Dewisadwy: 3000K, 3800K, 4500K, 5200K, 6000K
pylu	10-100% Smooth Triac Dimming
Cyftage	120V / 60Hz
Deunydd	Aluminum, Acrylic Shade
Math Mowntio	Surface Mount, Suspended Mount
Ardystiadau	Ardystiedig ETL
Rhychwant oes	50,000 awr
CRI	85+

5. Gosod a Gosod

Before installation, ensure the power is turned off at the circuit breaker. This fixture supports Surface Mount and Suspended Mount installations. Recessed installation is not supported.

Diagram illustrating three installation methods: Ceiling Mount (checked), Suspended installation (checked), and Recessed installation (marked with an X, indicating it is not supported). — Figure 3: Supported installation methods: Ceiling Mount and Suspended. Recessed installation is not supported.

5.1. Rhag-osod

Trowch Pŵer i ffwrdd: Locate the circuit breaker controlling the light fixture's power supply and turn it off. Verify power is off using a voltage profwr.
Dadbacio: Carefully remove the fixture and all components from the packaging. Inspect for any damage.
Dewiswch Gosodiadau: Before mounting, adjust the CCT (Color Correlated Temperature) and Wattage dip switches located on the side of the fixture to your desired settings. These are typically small switches that can be toggled with a finger or small tool.

5.2. Surface Mount Installation

Atodwch Plât Mowntio: Secure the mounting plate to the ceiling using the appropriate screws and expansion tubes from the kit. Ensure the plate is firmly attached and level.
Gwifrau: Connect the fixture's wires to the building's electrical wires (Black to Black, White to White, Ground to Ground) using the provided wire nuts. Ensure all connections are secure.
Gêm Mount: Carefully align the fixture with the mounting plate and secure it in place. Some models may slide into grooves or attach with additional screws.

5.3. Gosodiad Ataliedig

For suspended installation, additional suspension kits (not included) are typically required. Follow the instructions provided with your suspension kit in conjunction with these steps.

Install Suspension Kit: Attach the suspension cables or rods to the ceiling and to the fixture's designated suspension points according to the suspension kit's instructions.
Addasu Uchder: Adjust the suspension cables to achieve the desired hanging height and ensure the fixture is level.
Gwifrau: Connect the fixture's wires to the building's electrical wires (Black to Black, White to White, Ground to Ground) using the provided wire nuts. Ensure all connections are secure.

6. Cyfarwyddiadau Gweithredu

6.1. Dewis Tymheredd Lliw (CCT)

The fixture offers 5 selectable color temperatures. Adjust the CCT dip switch on the side of the fixture to choose your preferred light color before final installation or if you need to change it later.

Image showing a CCT Dip Switch on the side of the LED panel light with options for 2700K, 3000K, 4000K, 5000K, and 6000K, and an arrow pointing to a toggle button to select the preferred color temperature. — Figure 4: CCT Dip Switch for selecting color temperature.

3000K: Golau Melyn Cynnes
3800K: Neutral Warm Light
4500K: Golau Gwyn Niwtral
5200K: Cool White Light with a Natural Tendency
6000K: Golau Gwyn Cool

6.2. Wattage Detholiad

The fixture allows you to select between three wattage outputs to control brightness and energy consumption. Adjust the Power Dip Switch on the side of the fixture to your desired wattage.

Image showing a Power Dip Switch on the side of the LED panel light with options for 24W, 30W, and 40W, and an arrow pointing to a toggle button to select the preferred wattage. — Figure 5: Power Dip Switch for selecting wattage.

24W: Lower brightness, maximum energy saving.
30W: Medium brightness.
40W: Highest brightness, maximum light output.

6.3. Swyddogaeth Pylu

This fixture supports 10-100% smooth Triac dimming. To utilize this feature, ensure you have a compatible Triac dimmer switch installed in your electrical system.

Image demonstrating 10-100% smooth Triac dimming, showing a room with varying light levels from 10% to 100% brightness, and a compatible dimmer switch. — Figure 6: Smooth Triac dimming capability from 10% to 100%.

Adjust the dimmer switch to achieve your desired light intensity. The fixture is designed for flicker-free and noiseless operation across the dimming range.

7. cynnal

The SLAclite LED Flat Panel Light requires minimal maintenance.

Glanhau: Gwnewch yn siŵr bod y pŵer i ffwrdd cyn glanhau. Defnyddiwch liain meddal, sych, neu ychydig yn feddal.amp cloth to wipe the surface of the fixture. Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish or electrical components.
Arolygiad: Periodically inspect the fixture for any signs of damage, loose connections, or wear. If any issues are found, turn off the power and contact customer support.
Dim Rhannau Defnyddiadwy i Ddefnyddwyr: There are no user-serviceable parts inside the fixture. Do not attempt to open or repair the unit yourself.

8. Datrys Problemau

If you encounter issues with your LED Flat Panel Light, refer to the following common problems and solutions:

Problem	Achos Posibl	Ateb
Nid yw golau yn troi ymlaen	Dim cyflenwad pŵer Cysylltiad gwifrau rhydd Switsh neu dorrwr cylched diffygiol	Check if the circuit breaker is on. Ensure all wiring connections are secure. Test the switch and circuit breaker.
Mae golau'n fflachio neu'n pylu'n annisgwyl	Switsh pylu anghydnaws Gwifrau rhydd Cyftage amrywiadau	Ensure a compatible Triac dimmer is used. Check wiring connections. Consult an electrician for voltage materion.
Tymheredd lliw neu ddisgleirdeb anghywir	CCT neu Wattage dip switches set incorrectly	Turn off power, then adjust the CCT and Wattage dip switches to your desired settings.
Swn swnllyd	Switsh pylu anghydnaws Gwifrau rhydd	Replace with a compatible Triac dimmer. Check and secure all wiring connections.

If the problem persists after attempting these solutions, please contact SLAclite customer support.

9. Gwarant a Chefnogaeth

9.1. Gwarant y Gwneuthurwr

This SLAclite LED Flat Panel Light comes with a Gwarant gwneuthurwr 3 flynedd o ddyddiad y pryniant. Mae'r warant hon yn cwmpasu diffygion mewn deunyddiau a chrefftwaith o dan ddefnydd arferol. Nid yw'n cwmpasu difrod a achosir gan osod amhriodol, camddefnydd, damweiniau, neu addasiadau heb awdurdod.

9.2. Cynlluniau Amddiffyn Estynedig

Extended protection plans are available for purchase separately:

Cynllun Diogelu 3 Flynedd: Extends coverage for an additional 36 months.
Cynllun Diogelu 4 Flynedd: Extends coverage for an additional 48 months.
Amddiffyniad Llawn: Cynllun tanysgrifio misol sy'n cwmpasu pryniannau cymwys yn y gorffennol ac yn y dyfodol.

For details on these plans, please refer to the retailer's websafle neu cysylltwch â'u gwasanaeth cwsmeriaid.

9.3. Cefnogaeth i Gwsmeriaid

For technical assistance, warranty claims, or any questions regarding your SLAclite LED Flat Panel Light, please contact SLAclite customer support. Have your model number (B0FDF9BFYD) and purchase date ready when contacting support.

Gwybodaeth Gyswllt: Please refer to the contact details provided on your purchase receipt or the official SLAclite websafle.

SLAclite 1x4FT 2PACK