Curl Master CM002 Remote Control Device Owner’s Manual

Curl Master CM002 Remote Control Device

Specifications

• Model: Remote Control Device for Curl Master Pro – Football Spinning Device
• Power Source: Replaceable battery CR2477
• Connectivity: Bluetooth
• Operating Range: Not specified (Bluetooth standard range)
• Automatic Shut-off: 8 minutes of inactivity
• Included Accessories: Silicon bracelet, detachable necklace
• Manufacturer: Trakitall Ltd
• Origin: Made in China
• FCC/ISED Compliance: Evaluated to meet general RF exposure requirements. Minimum installation/operation distance: 0mm between radiator & body.

Usage Instructions

Remote Control Device Overview

1. On / Off and Ball Spin Start: Larger button.
2. Anti-Clockwise Spin Direction / Bluetooth Pairing: Button for anti-clockwise spin, also used for initial Bluetooth pairing.
3. Up to Speed Indicator: Green LED.
4. Clockwise Spin Direction: Button for clockwise spin.
5. Bluetooth Connection Indicator: Blue LED.
6. Speed Lights: 6 LEDs indicating selected spin speed.

Setup

1. Turn on the Curl Master Pro – Football Spinning Device.
2. Turn on the Remote-Control Device by pressing the larger button (1) until an audio alert is heard and a red light flashes. (Note: The remote turns off after 8 minutes of inactivity. To manually turn off, press button 1 until a double audio alert sounds.)
3. To pair the remote-control device to the Curl Master device, press button (2) until the blue connection LED (5) lights up, indicating a successful connection and pairing.
4. Once the blue light is lit, the remote device is ready to use. Re-pairing is not required for subsequent uses.

To Use

1. Once the 2 devices are paired and ready to use, place the ball on the cup of the Curl Master ball-spinning device.
2. 2. On the remote device, press button 2 until the desired speed is selected. Indicated by the number of speed indicator led are lit up from 1 to 6.
3. Then select the direction of spin by selecting button 3 for clockwise or button 4 for anti-clockwise.
4. Then, to start spinning, the player presses button 2.
5. When the Curl Master has reached the desired speed, the remote device will
   • Light up the up-to-speed green LED.
   • Sound an audio alert to indicate the ball is ready to be kicked.
6. After the Ball has been kicked, the device will stay awake for 8 minutes waiting for the cycle to restart; if not, it will switch itself off.
7. Replaceable battery CR2477. When the remote has a long flashing red LED, this indicates the battery is getting low and needs replacing

Included with the device in the box are a silicon bracelet and a detachable necklace. This gives the players the choice of how to use the remote device

Troubleshooting

• Remote not turning on: Ensure the battery is correctly inserted and charged. If the red LED flashes for a long duration, the battery is low and needs replacing.
• Remote not pairing with Curl Master Pro: Ensure both devices are turned on. Press button (2) on the remote until the blue connection LED (5) lights up. If issues persist, try turning both devices off and on again.
• Curl Master Pro not spinning: Check if the remote is paired and the spin direction/speed are selected. Press button (2) to initiate the spin.
• Remote turns off unexpectedly: The remote has an 8-minute inactivity timer. If it’s turning off during use, ensure you are interacting with it regularly.
• Low battery indication: A long flashing red LED on the remote indicates a low battery (CR2477). Replace it promptly.

FCC Statement
His equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If is equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.
• Caution: Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference
2. This device must accept any interference received, including interference that may cause undesired operation.

RF Exposure Information
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure conditions, in compliance with exposure requirements. This equipment should be installed and operated with a minimum distance of 0 mm between the radiator & your body.

ISED Statement

This device contains icence-exempt transmitter s receiver s t at compliance with Innovation, Science an conomic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:

1. This device may not cause interference.
2. This device must accept any interference, including interference that may cause undesired operation of the device.

The digital apparatus complies with Canadian CAN ICES-3 (B)/NMB-3(B). The device has been evaluated to meet the general RF exposure requirements. This equipment should be installed and operated with a minimum distance Omm betweenthe radiator & your body.