CUQI Parking Sensor System User Manual

CUQI Parking Sensor System

Reversing radar manual

1. Be careful not to install with electricity, and load the car with the flame off;
2. The dialing codes on the main unit are all dialed at the factory, so there is no need to touch the dialing codes;
3. When the host and the cable are plugged in, the plug should be checked clearly, and the color must be identified. White should be aligned with white, and blue should be aligned with blue;

Need punch hole s position

（The hole positions vary depending on the model and year, with the image serving only as a reference. The exact hole positions must be determined based on your specific model and year）

(Note: If you can’t punch holes, you can contact customer service.)

Radar Wiring Instructions

(The image is for reference only. The wiring of the cable sensor varies for different models and years. Please refer to the actual product received.)

RADAR WIRING DIAGRAM

Where the cables are connected

• Product name: Reversing radar
• Model: XY-03
• Rated voltage: 12V
• E-mail/Tel: 807154763@qq.com
• Manufacturer: Guangzhou Hengsheng Technology Co., Ltd. Address: Hongshan South Road, Jiekou Street, Conghua District, Guangzhou City, Guangdong Province, China

PROCONSEIL FR
Nivert, 75015, Paris France SophieDupont@proconseilfr.com