cudy WR3000E Gigabit Mesh WiFi 6 Router
Product Usage Instructions
- Connect the power adapter to the router.
- Wait for the Power system indicator light to turn solid on.
- Connect the router’s WAN port to DSL/Cable Modem or the Ethernet wall outlet.
- Connect the router via either method A or B.
- To connect your device to the router’s Wi-Fi network:
- Locate the default network name/SSID and Password printed on the bottom of the router.
- Connect your device to the Wi-Fi network using the provided credentials.
FAQ
- Q: How do I reset the router to factory settings?
- A: To reset the router, locate the reset button on the device and hold it down for at least 10 seconds until the lights blink.
- Q: Can I change the Wi-Fi network name and password?
- A: Yes, you can usually change the network name and password by accessing the router’s settings through a web browser. Refer to the user manual for detailed instructions specific to your model.
Introduction
- Connect the power adapter to the router and wait for the “Power” system indicator light to turn solid on.
- Connect the router’s WAN port to the DSL/Cable Modem or the Ethernet wall outlet.
- Connect the router via the A or B method.
- A Wi-Fi: Connect your device to the router’s Wi-Fi. (the default network name/SSID and Password are printed on the bottom of the router.)
Flip the page to continue… - B Wired: Turn off the Wi-Fi on your computer and connect it to the router’s LAN port via an Ethernet cable.
- A Wi-Fi: Connect your device to the router’s Wi-Fi. (the default network name/SSID and Password are printed on the bottom of the router.)
- Open a browser and follow the pictures to configure the router.
Enjoy the internet.
Power Connection
Connection Setup
Wi-Fi Connection
LED
Cudy APP
CONTACT
NEED TECH HELP?
Documents / Resources
 |
cudy WR3000E Gigabit Mesh WiFi 6 Router [pdf] Installation Guide WR3000E Gigabit Mesh WiFi 6 Router, WR3000E, Gigabit Mesh WiFi 6 Router, Mesh WiFi 6 Router, WiFi 6 Router, Router |
