cudy UH407 Network Computer Wireless Installation Guide

Ensure the device is powered off before connecting it to your computer or other devices.
Connect the appropriate cables to the corresponding ports on the UH40A.

Power on the device and your computer.

Usage

To use the UH40A, follow these steps:

Connect your USB devices to the USB ports on the UH40A.
If using an external display, connect it to the HDMI port on the device.

For power delivery, connect a USB-C cable to the USB-C (PD) port on the UH40A.

FAQ

Q: What do the LED indicators on the UH40A signify?
- A: The LED indicators provide status information about the device’s connectivity and power status. Refer to the manual for detailed information on the LED indicator meanings.
Q: Can I use the UH40A with a Macbook?
- A: Yes, the UH40A is compatible with Macbook devices that support the connectivity options provided by the device. Ensure proper compatibility before use.

Models

Connections

Safety Information

Do not attempt to disassemble, repair, or modify the device.

Keep the device away from water, fire, humidity, or hot environments.
Place the device with its bottom surface downward.

Do not use a damaged charger or USB cable to charge the device.
Do not use any other chargers than those recommended.

The adapter shall be installed near the equipment and shall be easily accessible.
Use only power supplies that are provided by the manufacturer and in the original packing of this product.

Plug the product into the wall outlets with an earthing connection through the power supply cord.
The plug on the power supply cord is used as the disconnect device, the socket-outlet shall be easily accessible.

The socket-outlet shall be installed near the equipment and shall be easily accessible.
This equipment can be powered only by types of equipment that comply with Power Source Class 2 (PS2) or Limited Power Source (LPS) defined in the standard of IEC 62368-1.

Please read and follow the above safety information when operating the device. We cannot guarantee that no accidents or damage will occur due to improper use of the device. Please use this product with care and operate at your own risk.

FCC STATEMENT

Canadian Compliance Statement
This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s license-exempt RSS(s). Operation is subject to the following two conditions:

This device may not cause interference.
This device must accept any interference, including interference that may cause undesired operation of the device.

EU Declaration of Conformity for Wired Products

Cudy hereby declares that this device is in compliance with the essential requirements and other relevant provisions of directives 2014/30/EU, 2014/35/EU, 2015/863/EU, and 2011/65/EU.
The original EU Declaration of Conformity may be found at http://www.cudy.com/ce.

WEEE

According to the EU Directive on Waste Electrical and Electronic Equipment (WEEE – 2012/19 / EU), this product must not be disposed of as normal household waste.
Instead, they should be returned to the place of purchase or taken to a public collection point for recyclable waste.
By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product.
For more information, please contact your local authority or the nearest collection point. Improper disposal of this type of waste may result in penalties according to national regulations.

CONTACT

Documents / Resources

cudy UH407 Network Computer Wireless [pdf] Installation Guide
UH405, UH407, UH40A, UH407 Network Computer Wireless, UH407, Network Computer Wireless, Computer Wireless

References

User Manual

cudy UH407 Network Computer Wireless

Product Usage Instructions