Cudy PE10 Computer
Product Information
Specifications
- Model: 810600313
- Interface: PCI-E
- Supported OS: Windows, Linux
Product Usage Instructions
Unpacking and Installation
- Unplug the power cable and remove the case panel.
- Insert the adapter into an available PCI-E slot and secure it with the provided screw.
- Assemble the case panel and power on your computer.
- Connection Setup:
- Plug the Ethernet cable into the adapter and connect it to your router or switch.
- Check if the computer is connected to the network.
Driver Installation
If the computer is not connected, download and install the driver by scanning the QR code provided or visit https://www.cudy.com/pe10 in your browser.
Troubleshooting
If the adapter is not detected
- Check the insertion of the adapter.
- Try inserting it into another PCI-E slot.
- Contact support at support@cudy.com for further assistance.
FAQ
Q: What should I do if the adapter is not detected by my computer
A: Follow the troubleshooting steps provided in the user manual. If the issue persists, contact support@cudy.com for assistance.
Quick Installation Guide
NEED TECH HELP?
Website: www.cudy.com
Email: support@cudy.com
Support
For technical support, the user guide and more information, please visit: https://www.cudy.com/pages/contact
- Unplug power cable and remove case panel.
- Insert the adapter into an available PCI-E slot and secure it with the provided screw
- Assemble the case panel and power on your computer.
- Plug the ethernet cable and connect to your router or switch.
- Check if the computer is connected to the network. If yes, enjoy the Internet directly;
If not, download and install the driver by scanning the QR code or enter https://www.cudy.com/pe10 in your browser.
Note
If the adapter is not detected
- Check the insertion.
- Try another slot.
- Contact support@cudy.com
Safety Information
- Keep the device away from water, fire, humidity or hot environments.
- Do not attempt to disassemble, repair, or modify the device.
- Do not use the device where wireless devices are not allowed.
Please read and follow the above safety information when operating the device. We cannot guarantee that no accidents or damage will occur due to improper use of the device. Please use this product with care and operate at your own risk.
Canadian Compliance Statement
This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device.
Para maiores informações, consulte o site da ANATEL – www.anatel.gov.br
FCC compliance information statement
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
WEEE
According to the EU Directive on Waste Electrical and Electronic Equipment (WEEE – 2012/19 / EU), this product must not be disposed of as normal household waste.
Instead, they should be returned to the place of purchase or taken to a public collection point for recyclable waste. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. For more information, please contact your local authority or the nearest collection point. Improper disposal of this type of waste may result in penalties according to national regulations.
Documents / Resources
![]() |
Cudy PE10 Computer [pdf] User Manual 810600313, PE10 |