CuddleCot 230V Cooling Cot User Manual

CuddleCot 230V Technical Features

System Components

• 1 x sturdy plastic storage/carry case with metal closures
• 1 x Shnuggle™ plastic bassinet with mattress, dressing & stand
• 1 x mains powered cooling unit
• 1 x large flexible plastic cooling pad (reusable)
• 1 x small flexible plastic cooling pad (reusable)
• 1 x flexible insulated connection hose
• 2 x sheets foil backed insulation (1 small, 1 large)
• 1 x 100ml biocide additive liquid
• 1 x drain key
• 1 x user guide

Technical Specification Summary

Power requirement: Mains 230V/50Hz
Mains cable length: 2.1 metres with bonded plug
Internal fuse rating: : 4A/250V quick blow
Cooling method: : Thermoelectric (Peltier). Non refrigerant. Max. 180W
Cooling medium: : Purified water e.g. distilled/de ionised/sterilised. (Not supplied). Self-contained. 450ml operating capacity
Operating temperature range: 8 – 13°C depending on ambient temperature
Total system dimensions as packed: 489mm x 324mm x 216mm, weight 8.9kg
Cooling unit dimensions: 27cm x 23cm x 13cm, weight 3.8kg
Cooling pad dimensions (unfilled): Large (full term) 550mm x 400mm, Small (premature) 290mm x 154mm Cooling hose length: 900mm
Fluid hose connections type: Quick connect/release throughout
NOTE: All measurements are approximate

General Features

• Low fluid alarm – visual and audible alerts
• Variable temperature control
• Display shows current temperature and set temperature (switchable between Celsius and Fahrenheit)
• Whisper quiet operation; only two moving parts
• Few moving parts therefore minimal user maintenance required
• Non-slip rubber feet
• All component surfaces can be wiped with any plastic safe sanitiser
• Conformities:
  UL 61010-1:2012. CAN/CSA-C22.2 No. 61010-1-12
  IEC 61010-1:2010 (IECEE CB Scheme). CE compliant
• NOT A MEDICAL DEVICE
• All spares available from UK stock – Contact us at www.cuddlecot.com

www.cuddlecot.com