QUICK START GUIDE
KINGKONG ES
Welcome
Welcome to the CUBOT family! We’re thrilled you’ve chosen CUBOT. This guide will help you get the most out of your new device. Read through this quick start guide carefully to ensure Safe and proper use of your device.
Get Support
Please visit the www.cubot.net/support page to find more information on our warranty and retum policy. You can also reach out to CUBOT Customer Support by visiting wew.cubot.net/support.
Regulatory information
Regulatory information can be found on our website . RoHS CE WEEE
According to Directive 2014/53/EU,the Bands and power are as follows: GSM 900: 33.00 dBm; GSM 1800: 30.00 dBm; UTRA FDD Band I/VIll: 24.00 d@m; E-UTRA FDD Band 1/3/7/8/20/28: 24.50 dBm;BT: 3.21 dBm EIRP; Wi-Fi 2.4 GHz; 14.41 dBm EIRP; WHFi § GHz: 12.72 dBm EIRP;5.8G Non-Specific SRD: 11.98 dBm EIRP; GPS/GLONASS/Galileo: 1559 – 1610 MHz (Rx).
Body worn operation
www.sar-tick.com
The device complies with RF specification SAR standard, Head :(limit 2 Wrkg) 0.330 Wikg .Body wom: (limit 2 W/kg) 0.487 Wikg.Hotspot:(limit 2 W/kg) 0.487 Wika. Limb: (limit 4 W/kg) 0.864 Wig. Meet CE certification standards.
This device uses Android Operating system and does not pre-install third party software.
For more details, please visit www.cubot.netiquick get detail Guide.
WARNING
Follow the warning information provided below to prevent incidents such as fire or explosion .
Do not turn on of use the device when the battery compartment is exposed.
The tablet should be at least 15 cm away from any medical implant or rhythm adjuster and never put the device in your coat pocket.
Do not expose the device and other batteries together with the high temperatures or heat-generating equipment such as sunlight, heaters, microwave ovens, ovens or water heaters. Overheating of the battery can cause an explosion.
When charging is complete or not charging, disconnect the charger from the device and unplug the charger from the power outlet.
If the device is equipped with a non-removable battery, do not replace the battery yourself to avoid damaging the battery or device.
Use of an unapproved or incompatible power source, charger or battery may cause fire, explosion or other hazards.
Do not disassemble or reset the battery, insert other objects, immerse in water or other liquids to avoid battery leakage, overheating, fire or explosion.
Do not drop, crush, scratch or puncture the battery to avoid subjecting the battery to excessive extemal pressure, resulting in intemal short-circuit and overheating of the Possibly Keep the device away from the belly of pregnant women and the lower abdomen of adolescents.
For Children and young people, please make sensible use of the device, for example by avoiding night-time communication and limiting the frequency and duration of calls.
The company does not bear the responsibility for accidents caused by non-standard related charging equipment.
To prevent possible hearing damage when using a headset, do not listen to sound at high volume U for long periods.
This marking on the product, accessories or literature indicates that the product and its electronic accessories (e.g. charger, headset. USB cable) should not be disposed of with other household waste.
SHENZHEN HUAFURUI TECHNOLOGY CO.,LTD.
Designed by CUBOT
All rights reserved
Made in China
Unit 601-03, 6/F, Block A, Building 1, Ganfeng Technology Building, No. 993
jliaxian Road, tlangiaotang Community, Bantian Street, Longgang District,
Shenzhen,518129, P.R. China
Tel. No. : 0755-83821787
Fax No. : 0755-23612065
For more details, please scan the QR code to browse the official website
https://www.cubot.net
Documents / Resources
 |
CUBOT E081 Kingkong ES Rugged Smartphone [pdf] User Guide E081, E081 Kingkong ES Rugged Smartphone, Kingkong ES Rugged Smartphone, ES Rugged Smartphone, Rugged Smartphone, Smartphone |