User Manul
for USB C Audio & Microphone Splitter
Customer service: Support@cubilux.com
Usage 1: PC/Gaming Headset
- Insert the USB C plug to USB C devices.
- Insertthe headset’s MIC plug to the adapter.
- Insertthe headset’s AUX plug to the adapter.
Usage 2:Microphone and Headphone
- Insertthe USB C plug to USB C devices.
- Connect the MIC plug tothe MIC jack of the adapter.
- Connect the HP plug to the AUX jack of the adapter.
Troubleshooting
| Troubleshooting | ||
| Usage | Result | Reason |
 Powered Condenser Microphone (Not Supported) |
 lo sound recorded |
Phantom power supply is needed. (Not included.) |
 Microphone |
No sound recorded |
The adapter is for TRS (3-pole) MIC. (Please usethe included ncluded converter.) |
 Low Sensitivity Microphone (Not Recommended) |
Low volume |
Gain limit of the host adapter. |
- AUX jack:3.5mm Stereo TRS
- MIC Jack:3.5mm Mono TRS/TS
- USB Connector:USBC Plug
DAC Path:
Sampling Rate:
44.1KHzZ~96KHz,1 6/24-bit
Headphone Impedance:
TYP.16~32 Ohm
THD+N:
<=0.01%@1KHz
Full Scale Output Level:
500mV RMS
ADC Path:
Sampling Rate:
16KHz~48KHz,16-bit
THD+N:
<=0.03%@1KHz
>ower Supply:
USB 5V
100mA
For Mac OS: Audio MIDI Setup – Microphone – Use This Device For Sound Input
For Windows: Control panel – Sound – Recording – Microphone
Documents / Resources
 |
CUBILUX USB C to TRS Microphone Audio Splitter [pdf] User Manual USB C to TRS Microphone Audio Splitter, TRS Microphone Audio Splitter, Microphone Audio Splitter, Audio Splitter, Splitter |