ctronics Pro Power Supply Camera User Manual

Electronics Pro Power Supply Camera

Specifications

• Model: WF TY5 L
• Date: 20241203
• Compatibility: Android, iOS

Product overview

Ctronics CTIPC security cameras are indoor or outdoor cameras of different shapes and functions. They support both Android and iOS smart phones, and Windows PC and Mac. User can install multiple Ctronics CTIPC security cameras on single equipment.

Setting
After power-on, the camera will begin to work. It can be used as an independent video recorder. It is suggested to connect the System to your mobile device or PC for easy access to it. The camera can be added and managed in any way below: APP on a mobile phone, software on a PC, or browser on a PC.

Downloading and installing of APP on a mobile phone

Please search for the app “Ctronics pro” in the App Store or Google Play, download and install it on your smartphone.
Note: A prompt reading “Grand mobile phone use permissions for APP?” will appear in connection to the camera. Please Choose “Yes” to enable all functions of the APP.

Registration of login ID
A personal APP account can protect your privacy and security. Only you can view it.

1. Open the APP and choose “Register” to enter the registration interface (Fig. 1).
2. To register, enter your email and password. Once confirmed, click “Register” to complete setup. (Fig.2)

Connection to a WiFi network

Before Using:

1. If using sd card Before power-on,please insert the Micro- sD card (2-128GB). If the Micro – SD card is inserted afterpower-on, detection may fail and the product will need tobe powered on again.
2. In Wifi connection, make the product and your mobilephone 1ft to 3ft (30cm to 100cm) from the router.
3. Before adding the camera, please turn on the Bluetooth permission and positioning permission of the APP, then turn on the Bluetooth of the phone and start preparing to connect the camera.
   (Note: Failure to open the APP will cause the camera connection to fail.)
4. Method A: Bluetooth Connection of Ctronics IP Camera (Not for a little of old models) You can scan the QR code below or visit the link to watch the added videohttps://youtu.be/aXgd5uUR3mg 
   1. Connect the camera to a proper power supply and put it in a place close to your mobile device and router.
   2. After power-on and self-check, long-press “Reset” for 8s and release it upon a prompt tone that suggests successful reset.
      (Note: After completing this step, you need to wait for 1 minute before proceeding to the next step.)
   3. Enter “Ctronics pro” APP, click “*” button in the upper right corner(Fig.3), Turn on the Bluetooth function according to the prompts(Fig.4).
   4. APP will automatically search for cameras that support Bluetooth, select your camera ‘ UID info to add(Fig.5).
   5. Select available WiFi and enter the WiFi password to finish the addition. (Fig.6, 7)

Camera Password Setup
The camera’s default password is “admin”. To enhance security, after the initial setup, you will be prompted to change the password when you first access the camera. Follow the on-screen instructions to create a new password with at least 8 characters, including both letters and numbers. Make sure to store the new password safely. If you encounter a “password error”, reset the camera and try the setup process again.

Delete Camera
Swipe left on the device in the list, and click the delete button to remove the camera.

Contact Us
If you have any questions, please click the “customer service” icon in the APP to enter the device page, select the device you need to give feedback and chat with online customer service. If the customer service is offline, please leave a message, and we will respond within 24 hours. If there is no reply after 24 hours, please contact: support@ctronics.com.

Method B: Configure the network through the personal hotspot on your mobile phone. You can scan the QR code below or visit the link to watch the added video

https://youtu.be/otMN0hx-92c

Step 1: Preparations

1. Connect the camera to a proper power supply and put it in a place close to your mobile device and router.
2. After power-on and self-check, long-press “Reset” for 8s and release it upon a prompt tone that suggests successful reset. (Note: After completing this step, you need to wait for 1 minute before proceeding to the next step.)
3. Enter the WLAN setting interface of your mobile device, find the WiFi network of your family in the WiFi network list, and connect to it.

Step 2: Connect the camera to your WiFi network.

1. Open mobile application “Ctronics pro” on your mobile phone, click symbol “+” (Fig.9) and choose “Camera (WIFI/Wired)” (Fig.10) to enter the device adding interface (Fig.11).
2. Click “New device” and check whether the camera has been powered on (Fig.12). If it has, click “Power is on. Next step” to enter the network cable connection confirmation interface. If the network cable is not connected, click “Not connected to the network cable” (Fig.13) to choose the network configuration interface.
3.  Choose “Not connected to the network cable” as the adding way (Fig.13) and click “Go add” to scan the QR code on the camera (Fig.14). After successful scanning, there will be automatic connection to the camera hotspot. Click “CONNECT” (Fig.15 ) to enter the wireless configuration interface.
4. Choose the WiFi network of your family, enter its password, confirm it, and click “Configure wireless and add” (Fig.16) for configuration. The camera will connect to the WiFi network automatically. Click “confirm” to add the camera (Fig.17 ).
   (*Note: Make sure the password of the WiFi network of your family contains 31 characters at most and no special characters like “?!” or “&,.”. It is suggested to make the password contain both digits and letters.)

Our cameras support computer connection and viewing. You can visit our Ctronics official website at www.ctronics.com, download and install the PC/MAC software “HiP2P” to add cameras. (Please refer to the detailed manual for the operation steps.)

If you need to view the detailed manual content, please scan the QR code below. Or you can also visit it link below to download the detailed manual:

https://cdn.shopify.com/s/files/1/0549/4548/0755/files/CTIPC_Series_IP _Camera_User_Manual_Bluetooth_-EN.pdf?v=1732551667

FAQs

Q: How can I reset the camera password?
A: If you encounter a password error, reset the camera and enter the setup process again.

Q: How do I connect the camera to my computer?
A: Visit the Ctronics official website for detailed instructions on connecting cameras to computers.