1. Úvod
1.1 Konec produktuview
This manual provides essential instructions for the proper setup, operation, and maintenance of your Hobbywing QUICRUN WP 10BL120 SD G2 Sensored Electronic Speed Controller (ESC) and 3650 SD G2 Brushless Motor Combo. This high-performance system is designed for remote-controlled vehicles, offering reliable and efficient power delivery. Please read this manual thoroughly before use to ensure optimal performance and safety.
1.2 Obsah balení
Upon opening your package, verify that all components are present:
- 1 x QUICRUN WP 10BL120 SD G2 ESC (Sensored)
- 1 x QUICRUN 3650 SD G2 Brushless Motor (with customizable Turn)
- Hobbywing Decals
- Various Accessories (e.g., wires, connectors, heat shrink tubing)
Image: The Hobbywing QUICRUN WP 10BL120 SD G2 ESC and 3650 SD G2 Motor Combo, showcasing the electronic speed controller and brushless motor components.
2. Bezpečnostní opatření
Dodržování následujících bezpečnostních pokynů je zásadní pro prevenci poškození produktu a zajištění bezpečnosti uživatele:
- Přečtěte si manuál: Familiarize yourself with all instructions before operating the product.
- Správná připojení: Ensure all connections are correct and secure. Incorrect wiring can cause damage.
- Bezpečnost baterie: Use only compatible batteries. Observe correct polarity. Do not overcharge or short-circuit batteries.
- Řízení tepla: ESCs and motors can become hot during operation. Allow components to cool before handling.
- Vystavení vodě: While the ESC is waterproof (WP), avoid prolonged submersion or exposure to corrosive liquids. Ensure all ports are sealed if applicable.
- Větrání: Ensure adequate airflow around the ESC and motor to prevent overheating.
- Děti: Keep the product and its components out of reach of small children.
- Demontáž: Do not attempt to disassemble or modify the ESC or motor. This voids the warranty and can cause damage.
3. Nastavení a instalace
3.1 Připojení regulátoru otáček
Follow these steps to connect the ESC:
- Připojení motoru: Connect the three motor wires (A, B, C) from the ESC to the corresponding motor phases. For sensored motors, connect the sensor cable from the motor to the ESC's sensor port. Ensure the sensor cable is oriented correctly.
- Připojení baterie: Connect the ESC's power input wires (red for positive, black for negative) to your battery pack. Ensure correct polarity.
- Připojení přijímače: Plug the ESC's throttle cable (usually a three-wire servo connector) into the throttle channel (CH2) of your receiver.
- Cooling Fan (if applicable): If your ESC includes a cooling fan, connect it to the designated fan port on the ESC.
3.2 Instalace motoru
Mount the 3650 SD G2 motor securely in your vehicle's motor mount using appropriate screws. Ensure proper gear mesh between the motor pinion and the spur gear. Incorrect gear mesh can lead to excessive wear and heat.
3.3 Kalibrace rozsahu škrticí klapky
Before first use, the ESC's throttle range must be calibrated to match your radio transmitter. Refer to the detailed calibration procedure in the separate ESC manual or Hobbywing's official website for your specific ESC model. Generally, this involves:
- Zapněte vysílač a nastavte trim plynu do neutrální polohy.
- Hold the ESC's SET button, then turn on the ESC. Release the button when the LED flashes.
- Set full throttle on your transmitter, press SET.
- Set full brake/reverse on your transmitter, press SET.
- Set neutral throttle on your transmitter, press SET.
4. Návod k obsluze
4.1 Zapnutí/vypnutí
- Zapnutí: Ensure all connections are secure. Turn on your radio transmitter first, then connect the battery to the ESC. Press the ESC's power button.
- Vypnutí: Disconnect the battery from the ESC. Then turn off your radio transmitter.
4.2 Programování ESC
The QUICRUN WP 10BL120 SD G2 ESC features programmable parameters to fine-tune its performance. These parameters can typically be adjusted using:
- The SET button on the ESC (limited parameters).
- A Hobbywing LED Program Box (recommended for full access to parameters).
Refer to the specific ESC manual for a complete list of programmable items and detailed instructions on how to adjust them.
5. Údržba
Regular maintenance ensures the longevity and optimal performance of your ESC and motor combo:
- Čištění: After each use, especially in dusty or dirty conditions, clean the ESC and motor with a soft brush or compressed air. Remove any debris that may impede cooling.
- Inspekce: Periodically check all wires and connectors for signs of wear, fraying, or corrosion. Ensure all screws are tight.
- Ložiska motoru: Inspect motor bearings for smooth operation. If they feel rough, they may need cleaning or replacement.
- Skladování: Store the ESC and motor in a clean, dry place away from direct sunlight and extreme temperatures. Disconnect batteries when storing.
6. Řešení problémů
Tato část se zabývá běžnými problémy, se kterými se můžete setkat:
| Problém | Možná příčina | Řešení |
|---|---|---|
| Motor not running / No response | Incorrect throttle calibration; Loose connections; Dead battery; Receiver not bound. | Recalibrate throttle range; Check all wiring; Charge battery; Re-bind receiver. |
| Motor stutters or runs roughly | Incorrect motor wiring; Damaged sensor cable; Incorrect ESC settings. | Verify motor phase connections; Check/replace sensor cable; Adjust ESC timing/settings. |
| ESC se přehřívá | Overgearing; Insufficient cooling; Excessive load; Incorrect ESC settings. | Reduce pinion size; Ensure proper airflow/fan operation; Reduce load; Adjust ESC timing. |
| Vehicle runs in reverse when throttle is applied forward | Motor wires connected incorrectly; Motor direction setting. | Swap any two of the three motor wires (A, B, C); Adjust motor direction in ESC programming. |
7. Specifikace
Key technical specifications for the Hobbywing QUICRUN WP 10BL120 SD G2 ESC and 3650 SD G2 Motor Combo:
| Funkce | Detail |
|---|---|
| Značka | HOBBYWING |
| Název modelu | HWI38020382 |
| Included ESC | QUICRUN WP 10BL120 SD G2 (Sensored) |
| Included Motor | QUICRUN 3650 SD G2 Brushless |
| Materiál | Plast |
| Výrobce | Hobbywing |
| UPC | 088718516921 |
| Rozměry balení | 6.75 x 5.65 x 2.35 palce |
8. Záruka a podpora
8.1 Informace o záruce
For detailed warranty terms and conditions, please refer to the official Hobbywing website or contact your local distributor. Warranty coverage typically applies to manufacturing defects and may vary by region.
8.2 Zákaznická podpora
If you encounter issues not covered in this manual or require further assistance, please visit the official Hobbywing support page or contact their customer service department. Provide your product model number (HWI38020382) and a detailed description of the issue for efficient support.
