1. Úvod
Thank you for choosing the ASAHOM Permanent Outdoor Lights Pro. This manual provides essential information for the safe and efficient installation, operation, and maintenance of your lighting system. Please read it thoroughly before use and retain it for future reference.
Image: The ASAHOM Permanent Outdoor Lights Pro packaging, remote control, and a close-up of the individual LED lights.
2. Bezpečnostní informace
VAROVÁNÍ: Nedodržení těchto bezpečnostních pokynů může vést k požáru, úrazu elektrickým proudem, zranění nebo poškození majetku.
- Před instalací, údržbou nebo řešením problémů vždy odpojte napájení.
- Ensure all connections are secure and waterproof, especially in outdoor environments.
- Do not install on rainy or hot days. Extreme temperatures or slippery conditions increase the risk of falls during installation.
- Operate the lights within the specified temperature range of -4°F to 113°F (-20°C to 45°C).
- Keep the power adapter and control box in a location protected from direct water exposure, despite their IP67 rating.
- Do not attempt to modify or repair the product. Contact customer support for assistance.
3. Obsah balení
Ověřte, zda jsou v balení přítomny všechny položky:
- 200ft White Permanent Outdoor Lights (1 unit)
- 6ft Extension Cords (6 units)
- Signál Amplifier (2 units)
- Waterproof Wire Connector (1 unit)
- Adhesive (12 units)
- Screw Clips (60 units)
- Screw Pack (18 units)
- Remote Control (1 unit, AAA battery NOT included)
- T-splitter (1 unit)
- Driver Module (1 unit)
- Ruler (1 unit)
- Uživatelský manuál (1 jednotka)
4. Nastavení a instalace
Follow these steps for proper installation of your ASAHOM Permanent Outdoor Lights Pro:
- Příprava: Disconnect the power. Clean the installation surface thoroughly with a tissue and alcohol to ensure optimal adhesion. Allow the surface to dry completely.
- Umístění: Install the lights approximately 2-4 inches (5-10 cm) away from the wall surface, typically on eaves.
- Přilnavost: Peel off the VHB gum sticker from the back of each light. Firmly press each light against the cleaned surface for about 8 seconds to ensure strong adhesion.
- Zajištění pomocí klipů: Attach the provided screw clips to each LED light for additional security. Use the screw pack to fasten them.
- Connecting Light Segments: Splice light segments using the white waterproof connectors every 16.4ft (5m). Ensure the connections are tight and secure by screwing in the cap.
- Extension and Signal Ampzvedání: If extending the light string beyond 150ft, the included driver module is required. For continuous connection of 4 pieces of 6ft extension cords, a signal ampAby byla zajištěna stabilita signálu, je třeba zapojit napájecí kabel před prvním prodlužovacím kabelem.
- Předinstalační test: Before final installation, test whether the lights function normally. This helps identify any issues before permanent mounting.
Image: Visual guide illustrating the step-by-step installation process, including cleaning, positioning, adhering, and connecting light segments.
Image: Illustration of the lights' modular design, highlighting their cuttable, spliceable, and extendable nature, along with the driver module.
5. Návod k obsluze
Your ASAHOM Permanent Outdoor Lights Pro offers multiple control methods:
5.1 Ovládání pomocí aplikace Smart Life
Download the Smart Life app from your device's app store. Follow the in-app instructions to pair your lights. The app provides extensive features:
- 100 scénických režimů: Choose from a variety of preset lighting effects for any occasion.
- 16 milionů barev: Select any color from the spectrum.
- Ovládání jednotlivých LED diod: Adjust the color of each LED light independently.
- 10 Music Modes: Sync lights to music, with adjustable microphone sensitivity for real-time effects.
- Funkce DIY: Create and save your own custom lighting patterns.
- Funkce časovače: Naplánujte si zapínání/vypínání světel v konkrétní časy.
- Nastavitelné bílé světlo: Dedicated warm white (2700K) and cool white (6500K) options for daily and accent lighting.
5.2 Dálkové ovládání
Use the included remote control for convenient access to various functions, including ON/OFF, brightness adjustment, color changes, and scene selection. Ensure AAA batteries are inserted (not included).
5.3 Ovládací skříňka
The physical control box allows direct control over the entire light strand. You can change the color, adjust brightness, reset, and turn the lights ON/OFF without connecting to the app.
5.4 Hlasové ovládání
Pair your lights with Amazon Alexa or Google Assistant via the Smart Life app for hands-free voice control.
Obrázek: Overview of the four control methods available for the lighting system: Smart Life App, Voice Devices (Alexa, Google Assistant), Control Box, and Remote Controller.
6. Údržba
The ASAHOM Permanent Outdoor Lights Pro are designed for durability and minimal maintenance:
- Trvanlivost: Constructed with anti-UV material, these lights are built to withstand outdoor conditions.
- Životnost: The LED lights have an estimated lifespan of up to 50,000 hours.
- Hodnocení voděodolnosti: The LED lights, power adapter, and control box are all IP67 waterproof, providing protection against dust and temporary immersion in water.
- Čištění: Periodically clean the light surfaces with a soft, damp cloth to remove dirt and debris. Ensure power is disconnected before cleaning.
- Kontrola připojení: Regularly inspect all connections for tightness and ensure waterproof caps are securely fastened.
Image: Icons highlighting the product's robust features for outdoor environments, including UV resistance, long lifespan, and IP67 waterproofing for key components.
7. Řešení problémů
| Problém | Možná příčina | Řešení |
|---|---|---|
| Světla se nerozsvítí. | Žádné napájení, uvolněné připojení, vadný napájecí adaptér. | Check power supply. Ensure all connections are secure. Test power adapter. |
| Lights flicker or some sections are off. | Poor connection, signal interference, insufficient power for extended length. | Verify all waterproof connectors are tight. Ensure 2.4G WiFi signal is strong. Use signal amplifier for lengths beyond 150ft. |
| Aplikace se nemůže připojit ke světelům. | Incorrect Wi-Fi network (only 2.4G supported), incorrect pairing mode, app glitch. | Ensure your phone is connected to a 2.4G Wi-Fi network. Reset the lights to pairing mode. Restart the Smart Life app. |
| Lights fall off after installation. | Improper surface preparation, insufficient pressure during adhesion, clips not used. | Ensure surface is clean and dry before applying adhesive. Apply firm pressure for 8 seconds. Use all provided screw clips for added security. |
| Dálkové ovládání nefunguje. | No batteries, dead batteries, remote not paired. | Insert AAA batteries. Replace old batteries. Follow instructions to pair the remote with the control box. |
8. Specifikace
| Funkce | Detail |
|---|---|
| Číslo modelu | S106D |
| Typ světla | RGBCW LED (5-in-1 RGB+WW+CW) |
| Počet světel | 144 |
| Celková délka | 200ft (extendable, max 200ft) |
| Jas | Up to 60lm per light (4000K white) |
| Teplota barev | 2700K-6500K (adjustable white) |
| Hodnocení voděodolnosti | IP67 (LEDs, power adapter, control box) |
| Provozní teplota | -4 °F až 113 °F (-20 °C až 45 °C) |
| Životnost | 50,000 hodin |
| Kontrolní metody | Smart Life App, Remote Control, Control Box, Voice Control (Alexa, Google Assistant) |
| svtage | 36 V (DC) |
| Wattage | 120 wattů |
9. Záruka a podpora
ASAHOM provides a 3-year warranty for its Permanent Outdoor Lights Pro. For warranty claims, technical support, or any inquiries regarding your product, please contact ASAHOM customer service through the retailer's platform or the official ASAHOM website. Please have your purchase details and model number (S106D) ready when contacting support.
