1. Úvod
This manual provides instructions for the PDP Afterglow Wave Wireless RGB Gaming Controller, designed for use with Nintendo Switch, Switch Lite, Switch - OLED Model, and Nintendo Switch 2 consoles. This controller features customizable RGB LED lighting, built-in motion controls, programmable back buttons, and a long-lasting rechargeable battery for an enhanced gaming experience.
Obrázek 1.1: Přední strana view of the PDP Afterglow Wave Wireless RGB Gaming Controller.
2. Nastavení
2.1 Počáteční nabíjení
Before first use, fully charge the controller. Connect the included USB-A to USB-C cable to the controller's USB-C port and a powered USB port (e.g., Nintendo Switch dock, computer, or USB wall adapter). The LED indicators on the controller will show charging status and turn off when fully charged. A full charge provides up to 20 hours of play time.
Image 2.1: The controller's USB-C port for charging.
2.2 Připojení k konzoli Nintendo Switch
- Ujistěte se, že je vaše konzole Nintendo Switch zapnutá a aktualizovaná na nejnovější systémový software.
- V nabídce HOME vyberte Ovladače, pak Změnit Grip/Pořadí.
- Stiskněte a podržte Tlačítko synchronizace on the top of the Afterglow Wave controller for a few seconds until the player LEDs begin to flash. The Sync Button is a small circular button located between the shoulder buttons.
- Once the controller pairs, the player LED(s) corresponding to the controller number will remain lit.
- The controller maintains a reliable wireless connection up to 30 feet from the console.
Image 2.2: Wireless connection in use.
3. Návod k obsluze
3.1 Základní ovládací prvky
The Afterglow Wave controller features standard Nintendo Switch button layouts, including:
- Left Analog Stick / L3 Button: Pro ovládání pohybu a kamery.
- D-Pad: Směrový vstup.
- Tlačítko mínus (-): Přístup k herním menu nebo systémovým funkcím.
- Tlačítko pro snímek obrazovky: Pořizujte snímky obrazovky.
- Right Analog Stick / R3 Button: For camera control or specific actions.
- Tlačítka A, B, X, Y: Akční tlačítka.
- Tlačítko plus (+): Přístup k herním menu nebo systémovým funkcím.
- Tlačítko Domů: Return to the HOME Menu.
- L, R, ZL, ZR Buttons: Ramenní a spoušťová tlačítka.
Obrázek 3.1: Konecview of controller buttons.
3.2 Přizpůsobení RGB osvětlení
The controller features eight customizable RGB LED lighting zones and four pre-set modes. Refer to the quick start guide or the official PDP website for detailed instructions on how to cycle through modes and customize lighting effects.
Image 3.2: Customizable RGB lighting zones.
3.3 Programovatelná tlačítka zpět
The controller includes two programmable quick-action back buttons located on the underside. These buttons can be mapped to replicate other controller functions for quicker responses in gameplay. Consult the quick start guide for instructions on how to program these buttons.
Image 3.3: Programmable back buttons.
3.4 Ovládání pohybu
The controller has built-in motion controls for immersive gameplay in compatible titles. These controls are automatically active when connected to the Nintendo Switch.
4. Údržba
4.1 Nabíjení baterie
To maintain optimal battery life, charge the controller regularly. Use the provided USB-A to USB-C cable. Avoid using damaged cables or chargers. Do not expose the controller to extreme temperatures.
4.2 Čištění
Clean the controller with a soft, dry cloth. Do not use abrasive cleaners, solvents, or harsh chemicals. Avoid getting moisture into any openings.
4.3 Skladování
Store the controller in a cool, dry place away from direct sunlight and extreme temperatures. When storing for extended periods, ensure the battery has a partial charge (around 50%) to help preserve its lifespan.
5. Řešení problémů
- Ovladač se nepřipojuje: Ensure the controller is charged. Verify the Nintendo Switch is in "Change Grip/Order" mode. Press and hold the Sync button on the controller until LEDs flash. If issues persist, try restarting the Nintendo Switch console.
- Baterie se nenabíjí: Check the USB-C cable and the power source. Try a different cable or USB port. Ensure the controller's charging port is free of debris.
- Buttons or joysticks unresponsive/drifting: Ensure the controller is fully charged. Try recalibrating the joysticks and motion controls through the Nintendo Switch system settings (System Settings > Controllers and Sensors > Calibrate Control Sticks / Calibrate Gyroscope).
- RGB osvětlení nefunguje: Check the controller's manual or PDP support website for instructions on how to activate and cycle through lighting modes. Ensure the controller is powered on.
- Krátká výdrž baterie: Ensure the controller is fully charged before use. Reduce RGB lighting brightness or turn off lighting effects to conserve battery.
6. Specifikace
- Číslo modelu: 500-252-BK
- Značka: PDP
- Kompatibilita: Nintendo Switch, Switch Lite, Switch - OLED Model, Nintendo Switch 2
- Konektivita: Wireless (up to 30-foot range)
- Baterie: 1 Lithium Polymer (included), up to 20 hours play time per charge
- Vlastnosti: 8 RGB lighting zones with 4 pre-set modes, 2 programmable back buttons, built-in motion controls, ergonomic design
- Rozměry: 6.29 x 2.55 x 5.31 palce
- Hmotnost: 12.63 unce
- Oficiálně licencováno: Yes, by Nintendo
7. Záruka a podpora
The PDP Afterglow Wave Wireless RGB Gaming Controller is officially licensed by Nintendo. For warranty information, product support, or further assistance, please refer to the documentation included with your product or visit the official PDP webUschovejte si doklad o koupi pro případ reklamace.
