Návod k obsluze žárovky Philips Ultinon Access LED H7

1. Úvod

Thank you for choosing Philips Ultinon Access LED H7 headlight bulbs. These bulbs are designed to provide superior illumination and a modern aesthetic for your vehicle. Featuring an ultra-compact, direct-fit design, they offer up to 80% more brightness compared to standard halogen bulbs and a cool white light at 6000 Kelvin.

This manual contains important information regarding the safe installation, operation, and maintenance of your Philips Ultinon Access LED H7 bulbs. Please read it thoroughly before installation and keep it for future reference.

Important Note: These Philips Ultinon Access LED bulbs are not compliant with ECE R37 regulations and are intended for off-road use only. It is your responsibility to ensure that the use of these retrofit LED lamps complies with the legal requirements in force in your country.

Image 1.1: Philips Ultinon Access LED H7 Headlight Bulb

2. Bezpečnostní informace

• Always ensure your vehicle's engine is off and the ignition is switched off before attempting any installation or maintenance.
• Allow existing bulbs to cool down completely before handling, as they can be extremely hot.
• Během instalace používejte vhodné ochranné pomůcky, jako jsou rukavice a ochrana očí.
• Avoid touching the glass or LED components of the new bulb directly with bare hands. Use gloves or a clean cloth.
• Nedívejte se přímo do rozsvícené LED žárovky, protože intenzivní světlo může způsobit namáhání očí nebo jejich poškození.
• Uchovávejte žárovky mimo dosah dětí.
• Staré žárovky a obaly zlikvidujte zodpovědně v souladu s místními předpisy.
• Soulad s právními předpisy: As stated, these bulbs are for off-road use only and may not be street legal in all regions. Verify local regulations before use on public roads.

3. Obsah balení

Your Philips Ultinon Access LED H7 headlight bulb package typically includes:

• 2 x Philips Ultinon Access LED H7 Headlight Bulbs

Po obdržení prosím zkontrolujte obsah balíku, abyste se ujistili, že jsou všechny položky přítomny a nepoškozené.

4. Nastavení a instalace

The Philips Ultinon Access LED H7 bulbs are designed for a direct 1:1 replacement of halogen bulbs, offering a simple 'plug & play' installation. No additional accessories are typically required.

Kroky instalace:

1. Příprava: Ensure your vehicle is turned off, the engine is cool, and the parking brake is engaged. Open the hood to access the headlight assembly.
2. Locate Headlight: Identify the headlight housing and the access point for the bulb. This may involve removing a cover or panel.
3. Vyjměte starou žárovku: Disconnect the electrical connector from the existing halogen bulb. Unclip or twist to remove the old bulb from its socket. Handle with care as it may be hot.
4. Vložte novou LED žárovku: Carefully insert the Philips Ultinon Access LED H7 bulb into the headlight socket. The ultra-compact design facilitates easy fitting. Ensure it is seated correctly and securely.
5. Připojení elektrických zařízení: Reconnect the electrical connector to the new LED bulb. The non-polarized design simplifies this step.
6. Bezpečná montáž: Znovu nasaďte všechny kryty nebo panely, které byly během procesu odstraněny.
7. Test funkčnosti: Turn on your vehicle's headlights to verify that both LED bulbs are functioning correctly. Check both low beam and high beam (if applicable for H7).

Image 4.1: The ultra-compact design of the Philips Ultinon Access LED bulb allows for easy installation.

Image 4.2: Simple plug & play installation, no additional accessories needed.

5. Návod k obsluze

Once installed, operating your Philips Ultinon Access LED H7 bulbs is straightforward:

• Simply turn on your vehicle's headlights as you normally would.
• The LED bulbs will provide instant, bright white light at 6000 Kelvin, enhancing visibility and giving your vehicle a modern look.
• Experience up to 80% more brightness compared to minimum legal standards for halogen lamps, improving your view silnice.

Image 5.1: Visual comparison of light output: Standard vs. Philips Ultinon Access LED.

Image 5.2: White light on the road for improved visibility.

6. Údržba

Philips Ultinon Access LED H7 bulbs are designed for long-lasting performance with minimal maintenance:

• Životnost: These LED bulbs have an operational lifespan of 1500 hours, which is significantly longer than traditional halogen bulbs.
• AirCool Technology: Integrated AirCool technology ensures consistent performance and contributes to the extended lifespan of the product by managing heat effectively.
• Čištění: If necessary, gently wipe the bulb's exterior with a clean, dry, lint-free cloth. Avoid using abrasive cleaners or solvents.
• Žádné díly opravitelné uživatelem: The bulbs do not contain any user-serviceable parts. Do not attempt to disassemble or modify the bulbs.

Image 6.1: Philips AirCool technology for prolonged bulb durability.

7. Řešení problémů

If you encounter issues with your Philips Ultinon Access LED H7 bulbs, refer to the following common problems and solutions:

• Žárovka nesvítí:
  • Check the electrical connection to ensure it is securely attached.
  • Verify that the bulb is correctly seated in the headlight socket.
  • Inspect your vehicle's fuse box for any blown fuses related to the headlights.
• Dashboard Error Messages (CANbus Issues):
  • Some modern vehicles have sensitive CANbus systems that may detect the lower power draw of LED bulbs as an error.
  • If you experience error messages on your dashboard, a separate CANbus adapter (resistor) may be required. These are typically sold separately and are not included with the bulbs. Consult your vehicle's manual or a professional for compatibility.
• Tlumené nebo blikající světlo:
  • Ensure the bulb is fully inserted and locked into place.
  • Zkontrolujte, zda v kabeláži nejsou uvolněné spoje.

If problems persist after attempting these troubleshooting steps, it is recommended to consult a qualified automotive technician.

8. Specifikace

9. Záruka a podpora

For information regarding the warranty of your Philips Ultinon Access LED H7 headlight bulbs, please refer to the documentation provided with your purchase or visit the official Philips automotive lighting webZáruční podmínky se mohou lišit v závislosti na regionu a prodejci.

If you require technical support or have questions not covered in this manual, please contact Philips customer service or your authorized retailer. Contact information can typically be found on the Philips webmísto nebo obal produktu.

Online zdroje: For additional information, product updates, and FAQs, please visit the official Značková prodejna Philips.