Uživatelská příručka k duálnímu HDMI 2.0 4K60 výstupnímu modulu RGBlink Q16pro

1. Úvod

This manual provides detailed instructions for the installation, operation, and maintenance of the RGBlink Q16pro Dual HDMI 2.0 4K60 Output Module. Please read this manual thoroughly before using the product to ensure proper functionality and to prevent damage.

2. Konec produktuview

The RGBlink Q16pro is a high-performance dual HDMI 2.0 output module designed for professional video processing systems. It supports 4K60 resolution, providing robust and reliable video output capabilities.

Obrázek 1: RGBlink Q16pro Dual HDMI 2.0 4K60 Output Module. This image displays the module from an angled perspective, highlighting the two HDMI 2.0 output ports labeled "HDMI2.0 1" and "HDMI2.0 2", along with the "OUTPUT" label and mounting screws on the faceplate. The circuit board with heat sinks and various electronic components is visible behind the faceplate.

3. Nastavení a instalace

1. Vypnout: Ensure the main device (e.g., video processor chassis) is powered off and disconnected from the power source before installation.
2. Vyhledejte slot: Identify an available expansion slot within the compatible RGBlink chassis.
3. Vložit modul: Carefully align the Q16pro module with the expansion slot and gently push it in until it is firmly seated. Avoid excessive force.
4. Zabezpečený modul: Use the provided screws to secure the module's faceplate to the chassis.
5. Připojit kabely: Connect HDMI 2.0 cables from the Q16pro output ports to your display devices. Ensure cables are securely connected.
6. Zapnutí: Reconnect the main device to the power source and power it on.

Note: Always refer to the main device's manual for specific chassis installation procedures.

4. Návod k obsluze

Once installed, the Q16pro module functions as an integral part of your RGBlink video processing system. Operation is primarily managed through the main device's control interface (e.g., front panel, software application, or web rozhraní).

• Konfigurace výstupu: Access the main device's output settings to configure the HDMI 2.0 outputs from the Q16pro module. This typically includes setting resolution, refresh rate, and color space.
• Směrování signálu: Route desired input signals to the Q16pro's output ports using the main device's routing controls.
• Správa EDID: The module supports EDID management. Refer to the main device's manual for instructions on how to manage EDID settings for connected displays.
• Aktualizace firmwaru: Ensure the main device and all installed modules, including the Q16pro, are running the latest firmware. Firmware updates are typically managed through the main device's system settings.

For detailed operational procedures, consult the comprehensive user manual of your RGBlink video processor chassis.

5. Údržba

The RGBlink Q16pro module is designed for reliable operation with minimal maintenance. Adhere to the following guidelines:

• Čištění: Keep the module and its connectors free from dust and debris. Use a soft, dry cloth for cleaning. Avoid liquid cleaners.
• Větrání: Ensure the chassis housing the module has adequate ventilation to prevent overheating. Do not obstruct air vents.
• Správa kabelů: Ensure all connected cables are properly routed and secured to prevent strain on the connectors.
• Podmínky prostředí: Operate the module within the recommended temperature and humidity ranges specified for the main device.

6. Řešení problémů

If you encounter issues with the Q16pro module, consider the following troubleshooting steps:

• Žádný video výstup:
  • Ověřte, zda je modul správně usazen ve svém slotu.
  • Check HDMI cable connections at both the module and the display.
  • Ensure the display is powered on and set to the correct input.
  • Confirm that the main device is routing a valid signal to the Q16pro output.
  • Test with a different HDMI cable or display.
• Nesprávné rozlišení/obnovovací frekvence:
  • Check the output settings within the main device's control interface.
  • Verify the connected display supports the desired resolution and refresh rate.
  • Review EDID settings if applicable.
• Modul nebyl detekován:
  • Power cycle the main device.
  • Re-seat the Q16pro module in its slot.
  • Ensure the main device's firmware is up to date.

If problems persist, contact RGBlink technical support or your authorized dealer.

7. Specifikace

8. Záruka a podpora

Informace o záruce a technickou podporu naleznete na oficiálních stránkách RGBlink. website or contact your authorized RGBlink dealer. Keep your purchase receipt for warranty claims.

RGBlink Official Webmísto: www.rgblink.com