1. Úvod
This manual provides essential instructions for the safe and efficient use of your Philips S6305/00 Wireless Speaker. Designed for portability and robust performance, this speaker features Bluetooth 5.0 connectivity, IPX7 waterproofing, a 20-hour battery life, and a power bank function. Please read this manual thoroughly before using your device.
2. Vlastnosti produktu
- Vodotěsnost IPX7: The speaker is designed to withstand immersion in up to 1 meter of water for up to 30 minutes, making it suitable for use near pools or in the shower. Ensure the port cover is securely closed before water exposure.
- Prodloužená životnost baterie: Enjoy up to 20 hours of continuous music playback on a single charge.
- Integrated Power Bank: Use the USB port to charge your smart devices directly from the speaker's battery.
- Připojení Bluetooth 5.0: Provides a stable wireless connection with a range of up to 20 meters.
- Dynamický zvuk: Equipped with two 2.25-inch full-range drivers and two passive bass radiators for clear audio and powerful bass.
- Vícebarevná LED světla: LED lights at the ends of the speaker pulsate to the beat of your music, enhancing the listening experience.
- Stereo párování: Connect two Philips S6305/00 speakers for an immersive stereo sound experience.
3. Začínáme
3.1 Obsah balení
- Philips S6305/00 Wireless Speaker
- Průvodce rychlou instalací
- Záruční list
- Worldwide Warranty Leaflet
- Nabíjecí kabel USB (typu C)
3.2 Nabíjení reproduktoru
Before first use, fully charge the speaker. Connect the supplied USB charging cable to the speaker's USB-C port and to a USB power adapter (not included). The battery indicator LEDs will illuminate during charging. A full charge typically takes several hours.
3.3 Zapnutí/vypnutí
Stiskněte tlačítko Tlačítko napájení (
) located on the top panel to turn the speaker on or off. The speaker will automatically power off after 15 minutes of inactivity to conserve battery.

Figure 1: Top control panel of the Philips S6305/00 speaker, displaying power, Bluetooth, play/pause, volume, and LED light buttons.
3.4 Párování Bluetooth
- Ujistěte se, že je reproduktor zapnutý.
- Stiskněte a podržte Tlačítko Bluetooth (
) for a few seconds until the Bluetooth indicator light flashes, indicating pairing mode. - Na svém zařízení (chytrém telefonu, tabletu atd.) povolte Bluetooth a vyhledejte dostupná zařízení.
- Select "Philips S6305/00" from the list. Once connected, the Bluetooth indicator light will glow steadily.
3.5 Audio-In Connection
For devices without Bluetooth, connect an audio cable (not included) from your device's headphone jack to the speaker's 3.5mm audio-in port. The speaker will automatically switch to audio-in mode.
4. Návod k obsluze
4.1 Základní ovládací prvky
- Přehrát/pozastavit: Stiskněte tlačítko Tlačítko Přehrát/Pozastavit (
) pro přehrávání nebo pozastavení zvuku. - Ovládání hlasitosti: Stiskněte tlačítko Zvýšení hlasitosti (+) or Snížit hlasitost (-) tlačítka pro nastavení hlasitosti.
- Přeskočit skladbu: Dvakrát stiskněte Zvýšení hlasitosti (+) button for next track, or Snížit hlasitost (-) tlačítko pro předchozí skladbu.
4.2 Ovládání LED světel
The multi-colored LED lights activate automatically when the speaker is powered on. To cycle through light modes or turn them off, press the Tlačítko světelného režimu (
) on the control panel. The speaker does not retain the last light setting; lights will be on by default upon each power cycle.

Figure 2: The Philips S6305/00 speaker displaying its multi-colored LED lights, which pulsate with the music.
4.3 Using the Power Bank Function
To charge an external device, connect it to the speaker's USB-A output port using an appropriate charging cable (not included). The speaker will begin charging the connected device.
4.4 Stereo Pairing (TWS)
To achieve true wireless stereo sound, you can pair two Philips S6305/00 speakers:
- Ujistěte se, že jsou oba reproduktory zapnuté a nejsou připojeny k žádnému zařízení Bluetooth.
- Na jednom reproduktoru (to bude primární reproduktor) stiskněte a podržte tlačítko Tlačítko stereo párování (often indicated by two interlocking circles or a similar icon, refer to quick start guide for exact icon).
- The primary speaker will search for the secondary speaker. Once connected, an audible tone will confirm the stereo pairing.
- Connect your device to the primary speaker via Bluetooth as described in section 3.4. Audio will now play in stereo across both speakers.
5. Údržba
5.1 Čištění
Reproduktor otřete měkkým, damp cloth. Do not use abrasive cleaners or solvents. Ensure the speaker is dry before charging or exposing to water.
5.2 Voděodolná péče
Always ensure the rubber cover for the charging and audio-in ports is securely sealed before exposing the speaker to water. While the speaker is IPX7 rated, direct water streams can temporarily muffle sound due to the fabric covering the speakers. Sound quality will return to normal once the fabric dries.

Figure 3: The Philips S6305/00 speaker shown amidst water splashes, highlighting its IPX7 waterproof capability.
6. Řešení problémů
| Problém | Možná příčina | Řešení |
|---|---|---|
| Reproduktor se nezapne. | Baterie je vybitá. | Connect the speaker to a power source using the USB-C cable and charge it. |
| Nelze spárovat přes Bluetooth. | Reproduktor není v režimu párování; Bluetooth zařízení je vypnutý; reproduktor je již připojen k jinému zařízení. | Ensure speaker is in pairing mode (flashing Bluetooth LED). Turn off and on your device's Bluetooth. Disconnect from other devices. |
| Žádný zvuk nebo nízká hlasitost. | Volume too low on speaker or source device; incorrect input source selected. | Increase volume on both speaker and source device. Ensure correct input (Bluetooth or Audio-in) is active. |
| Sound is muffled after water exposure. | Water trapped in the speaker's fabric cover. | Allow the speaker to air dry completely. Sound quality will return once the fabric is dry. |
| Battery level indicator is unclear. | Battery indicator LEDs only show charge status when connected to power. A green flashing Bluetooth LED indicates low battery. | Connect the speaker to a charger to view the current battery level. Charge when the green Bluetooth LED flashes. |
7. Specifikace

Obrázek 4: Vnitřní view of the Philips S6305/00 speaker, illustrating its dual full-range drivers and passive bass radiators.
- Model: S6305/00 (TAS6305/00)
- Značka: Philips
- Konektivita: Bluetooth 5.0, Stereo Audio (3.5mm jack), USB 2.0 (for power bank)
- Bezdrátový dosah: Až 20 metrů
- Výstupní výkon: 20 Watts (2 x 10 Watts)
- Ovladače reproduktorů: 2 x 2.25-inch full-range drivers, 2 x passive bass radiators
- Typ baterie: Lithium-iontové (vyžadují 4, jsou součástí balení)
- Životnost baterie: Až 20 hodin
- Zdroj napájení: Battery Powered, 5 Volts (DC) input
- Hodnocení voděodolnosti: IPX7
- Rozměry produktu: 10 D x 23 Š x 10 V centimetrů
- Hmotnost položky: 0.8 kilogramu (800 g)
- Materiál: Plast
- Zahrnuté komponenty: Bluetooth speaker, quick install guide, warranty card, world wide warranty leaflet
- Speciální vlastnosti: Microphone function (for calls)
8. Záruka a podpora
Your Philips S6305/00 Wireless Speaker comes with a limited warranty. Please refer to the included Warranty Leaflet and Worldwide Warranty Leaflet for detailed terms and conditions, including coverage period and claim procedures.
For technical support, service, or further inquiries, please visit the official Philips support website or contact their customer service department. Contact information can typically be found in the warranty documentation or on the Philips brand webmísto.





