Strymon Sunset Dual Overdrive Pedal

Zavedení

The Strymon Sunset is a versatile dual overdrive pedal designed to provide a wide range of classic overdrive and distortion tones. It features two independent channels, A and B, each offering distinct overdrive circuits, allowing for flexible tone shaping and stacking options. This manual provides detailed instructions on setting up, operating, and maintaining your Sunset pedal.

Nastavení

Follow these steps to properly set up your Strymon Sunset pedal:

1. Připojení napájení: Connect a standard 9V DC power supply (center-negative, 200mA minimum) to the 9V DC input jack on the rear panel. Ensure the power supply meets the specified voltage a aktuální požadavky.
2. Vstupní připojení: Připojte kytaru nebo jiný nástroj k IN konektoru na zadním panelu pomocí standardního 6 mm kabelu.
3. Výstupní připojení: Připojte VEN jack on the rear panel to your amplifier nebo další pedál v signálovém řetězci pomocí standardního 6 mm kabelu.
4. Volitelná připojení:
   • Expression Pedal (EXP): For real-time control over parameters, connect an expression pedal to the EXP zvedák.
   • Favorite Switch (FAV): Connect an external favorite switch to the FAV jack to recall a saved preset.

Figure 1: Rear panel connections of the Strymon Sunset pedal. This view highlights the IN, OUT, FAV, EXP, and 9VDC power input jacks, along with the B->A and A+B switches.

Návod k obsluze

The Strymon Sunset features two independent overdrive channels, A and B, each with unique voicings and controls. Understanding these controls is key to unlocking the pedal's full potential.

Figure 2: Top panel controls of the Strymon Sunset pedal. This image displays the LEVEL, DRIVE, and TONE knobs for both channels, along with the A and B circuit type switches and footswitches.

Ovládací prvky na předním panelu

• Channel A Controls:
  • LEVEL A: Adjusts the output volume of Channel A.
  • DRIVE A: Controls the amount of gain/overdrive for Channel A.
  • TONE A: Shapes the tonal character of Channel A, typically acting as a high-cut filter.
  • A Circuit Switch: Selects between three distinct overdrive circuits for Channel A:
    • Ge (Germanium): Smooth, warm, and dynamic overdrive, reminiscent of classic germanium diode circuits.
    • Texas: Mid-focused, bluesy overdrive with a distinct character.
    • Ztrojnásobit: A treble booster circuit, ideal for pushing an already overdriven amp or adding sparkle.
• Channel B Controls:
  • LEVEL B: Adjusts the output volume of Channel B.
  • DRIVE B: Controls the amount of gain/overdrive for Channel B.
  • TONE B: Shapes the tonal character of Channel B.
  • B Circuit Switch: Selects between three distinct overdrive circuits for Channel B:
    • 2 Stage: A classic two-stage soft-clipping overdrive.
    • Tvrdý: A harder clipping overdrive with increased compression and sustain.
    • JFET: A JFET-based circuit offering a more amp-like, natural overdrive.
• Nožní spínače:
  • Nožní spínač: Engages or bypasses Channel A. The corresponding LED indicates its status.
  • B Nožní spínač: Engages or bypasses Channel B. The corresponding LED indicates its status.

Spínače na zadním panelu

• B->A / A+B Switch: This switch determines the stacking order when both channels are engaged:
  • B->A: Channel B feeds into Channel A. This is useful for boosting Channel A with Channel B's gain.
  • A+B: Channels A and B run in parallel. This allows for blending the two distinct tones.
• BRIGHT Switch: A global switch that adds a subtle high-end boost to the overall output.
  • +: Engages the bright boost.
  • -: Disengages the bright boost.

Údržba

To ensure the longevity and optimal performance of your Strymon Sunset pedal, follow these maintenance guidelines:

• Čištění: Use a soft, dry cloth to wipe down the pedal's enclosure. Avoid using abrasive cleaners or solvents, as they may damage the finish or internal components.
• Skladování: Pedál skladujte na chladném a suchém místě mimo dosah přímého slunečního záření, extrémních teplot a vysoké vlhkosti.
• Napájení: Always use a regulated 9V DC center-negative power supply that meets the pedal's current requirements (200mA minimum). Using an incorrect power supply can damage the unit and void the warranty.
• Spojení: Pravidelně kontrolujte všechny kabelové spoje, zda nejsou opotřebované. Ujistěte se, že konektory jsou bez prachu a nečistot.

Odstraňování problémů

If you encounter issues with your Strymon Sunset pedal, refer to the following common problems and solutions:

Specifikace

Záruka a podpora

Strymon products are built with high-quality components and undergo rigorous testing. For information regarding warranty coverage, product registration, and technical support, please visit the official Strymon webnebo se obraťte na jejich zákaznický servis. Uschovejte si účtenku jako doklad o koupi pro případ reklamace.

Strymon Official Webmísto: www.strymon.net