Orient MBSSC064 Men's Chronograph Watch

Zavedení

Thank you for choosing the Orient MBSSC064 Men's Chronograph Watch. This manual provides essential information for the proper setup, operation, and maintenance of your timepiece. Please read these instructions carefully to ensure optimal performance and longevity of your watch.

Konec produktuview

The Orient MBSSC064 is a sophisticated men's chronograph watch featuring a stainless steel case and bracelet, a black dial, and a mineral crystal. It is designed for durability and precision.

Image: Orient MBSSC064 Men's Chronograph Watch, front view. This image displays the watch's black dial, silver-tone stainless steel case and bracelet, and chronograph sub-dials.

Komponenty:

• Koruna: Používá se k nastavení času a data.
• Tlačítka (A a B): Používá se k ovládání funkcí chronografu.
• Hlavní ciferník: Zobrazuje hodiny, minuty a sekundy.
• Pomocné ciferníky: Typically for chronograph minutes, seconds, and 24-hour display (specific functions may vary).
• Datumové okno: Zobrazuje aktuální datum.
• Náramek z nerezové oceli: Durable and adjustable for wrist comfort.

Nastavení

Nastavení času:

1. Vytáhněte korunku do polohy druhého cvaknutí. Vteřinová ručička se zastaví.
2. Otáčením korunky nastavte hodinovou a minutovou ručičku. Pokud mají vaše hodinky 24hodinový formát nebo se datum mění o půlnoci, ujistěte se, že je správně nastaven čas AM/PM.
3. Zatlačte korunku zpět do normální polohy. Vteřinová ručička se obnoví v pohybu.

Nastavení data:

1. Vytáhněte korunku do polohy prvního cvaknutí.
2. Rotate the crown to set the date. Avoid setting the date between 9 PM and 3 AM, as this can damage the movement.
3. Zatlačte korunku zpět do normální polohy.

Obsluha chronografu

Funkce chronografu umožňuje měřit uplynulý čas nezávisle na hlavním zobrazení času.

1. Start: Stiskněte tlačný mechanismus A (top pusher) to start the chronograph. The chronograph second hand will begin to move.
2. Stop: Stiskněte tlačný mechanismus A znovu pro zastavení chronografu. Uplynulý čas bude zobrazen na ručičkách chronografu.
3. Resetovat: Po zastavení stiskněte tlačítko B (spodní tlačítko) pro resetování ručiček chronografu do nulových poloh.
4. Mezičas (pokud je to relevantní): Some chronographs allow for split time measurement. Refer to specific movement instructions if this feature is present.

Note: Do not operate the pushers while the watch is wet or submerged in water, as this can compromise water resistance.

Údržba

Čištění:

Wipe the watch case and bracelet regularly with a soft, dry cloth to remove dirt and perspiration. For stainless steel, a slightly damp Lze použít hadřík a poté suchý hadřík. Nepoužívejte chemické čisticí prostředky ani abrazivní materiály.

Water Resistance (100 Meters / 10 ATM):

Your Orient MBSSC064 watch is water-resistant up to 100 meters (10 ATM). This means it is suitable for swimming, snorkeling, and showering. However, it is ne suitable for high-impact water sports, diving, or prolonged submersion at depths beyond its rating.

• Před jakýmkoli kontaktem s vodou se ujistěte, že je korunka zcela zatlačena.
• Neovládejte korunku ani tlačítka, pokud jsou hodinky mokré nebo ponořené.
• Avoid exposing the watch to extreme temperature changes (e.g., hot shower immediately followed by cold water), as this can affect seals.
• Have the water resistance seals checked periodically (e.g., every 2-3 years) by an authorized service center.

Výměna baterie:

When the battery needs replacement, the second hand may start moving in two-second intervals (End-of-Life indicator). Battery replacement should only be performed by an authorized Orient service center or a qualified watchmaker to maintain water resistance and prevent damage to the movement.

Odstraňování problémů

• Hodinky neběží: Check if the crown is fully pushed in. If it's a new watch, ensure any plastic battery stopper has been removed. If the watch has stopped, the battery may need replacement.
• Nesprávný čas/datum: Refer to the "Setting the Time" and "Setting the Date" sections. Ensure the crown is fully pushed in after setting.
• Chronograf se neresetuje na nulu: This may require a chronograph hand reset procedure. Consult an authorized service center if the issue persists after following basic operating instructions.
• Kondenzace uvnitř krystalu: If you notice condensation under the crystal, this indicates a loss of water resistance. Immediately take the watch to an authorized service center to prevent further damage.

Specifikace

Záruka a podpora

Your Orient MBSSC064 watch comes with a Záruka 12 měsíců from the date of purchase, covering manufacturing defects. This warranty does not cover normal wear and tear, accidental damage, or damage resulting from improper use or unauthorized repairs.

For warranty claims, service, or technical support, please contact your authorized Orient dealer or an official Orient service center. Attempting to repair the watch yourself will void the warranty.