Hama 207-54 Glitter Mix Midi Beads Instruction Manual

1. Konec produktuview

The Hama 207-54 Glitter Mix Midi Beads set provides a creative outlet for individuals aged 5 and above. This package contains 3 bags, each with 1000 midi-sized beads, totaling 3000 pieces. These beads are designed to be placed on a pegboard and then fused together with heat, creating various designs and figures. The activity promotes fine motor skills and encourages imaginative play.

Mezi klíčové vlastnosti patří:

• 3000 glitter mix midi beads (3 x 1000 pieces).
• Encourages creativity and imaginative design.
• Rozvíjí jemné motorické dovednosti a koordinaci ruka-oko.
• Suitable for mess-free play when used correctly.
• Recommended for ages 5 years and older.

2. Bezpečnostní informace

Před použitím tohoto produktu si prosím přečtěte a pochopte všechna bezpečnostní upozornění.

• VAROVÁNÍ: NEBEZPEČÍ UDUŠENÍ - Malé části. Nevhodné pro děti do 3 let.
• Tento produkt je doporučen pro děti od 5 let.
• Adult supervision is required during the ironing process to prevent burns and ensure proper bead fusion.
• Keep beads away from infants and toddlers to avoid accidental ingestion.
• Do not ingest beads.
• Ensure adequate ventilation when ironing beads.

3. Nastavení a provoz

To begin creating with Hama Midi Beads, you will need a Hama pegboard (sold separately) and ironing paper (included in most Hama sets or sold separately), in addition to the beads themselves. An iron is also required for the fusing process.

Pokyny krok za krokem:

1. Place Beads on Pegboard: Arrange the Hama Midi Beads on a Hama pegboard according to your desired design. Ensure each bead is firmly seated on a peg.
   

   Image showing a hand carefully placing individual Hama beads onto a pegboard to create a colorful pattern. This illustrates the initial design phase.

2. Iron the Design (Adult Supervision Required): Once your design is complete on the pegboard, place a sheet of Hama ironing paper over the beads. Using a household iron set to a medium-hot temperature (no steam), gently iron the beads in a circular motion for a few seconds. The heat will fuse the beads together. Continue ironing until the beads are visibly fused.
   

   Image depicting an iron being used over ironing paper placed on top of Hama beads on a pegboard. This shows the fusing process.

3. Remove from Pegboard: Carefully remove the ironing paper. Allow the fused design to cool completely before gently peeling it off the pegboard. If the design is still warm, it may warp or break. For best results, place a heavy object on the design while it cools to ensure it remains flat.
   

   Image illustrating a hand carefully lifting a completed and fused Hama bead design from the pegboard, revealing the finished craft.

Tip: You can iron both sides of the design for extra durability, but ensure the first side is fully cooled before flipping.

4. Údržba

• Skladování: Store Hama beads in their original packaging or in sealed containers to prevent mixing and loss. Keep them in a cool, dry place away from direct sunlight.
• Cleaning Pegboards: Pegboards can be cleaned with a damp cloth if they become dusty or dirty. Avoid harsh chemicals that may damage the plastic.
• Ironing Paper: Ironing paper can be reused multiple times until it becomes too worn or discolored. Replace it when necessary to ensure proper bead fusion and prevent sticking.

5. Řešení problémů

• Korálky se neslepují: Ensure the iron is hot enough and you are applying even pressure. Iron for a slightly longer duration. Make sure the ironing paper is correctly placed.
• Design warping/breaking: Allow the design to cool completely before removing it from the pegboard. Placing a heavy book on top while cooling can help keep it flat. Ensure beads are sufficiently fused.
• Korálky lepící se na žehlicí papír: The iron might be too hot, or the ironing paper might be worn out. Reduce iron temperature or replace the paper.
• Pegboard melting: This indicates the iron is too hot or has been held in one spot for too long. Reduce iron temperature and keep the iron moving.

6. Specifikace

7. Záruka a podpora

Hama products are manufactured to high-quality standards. For specific warranty information or customer support, please refer to the official Hama webnebo se obraťte na prodejce. Uschovejte si doklad o koupi pro případné reklamace.

Pro další pomoc můžete navštívit Hama official webmísto.