Zavedení
The Axxess AX-GMCL2-SWC Data Interface is designed for aftermarket head unit installations in select GM vehicles from 2000 to 2013. This interface provides essential functionalities such as accessory power, retention of Retained Accessory Power (RAP), chimes, steering wheel audio controls, and the factory auxiliary input. It also ensures the retention of OnStar and original equipment (OE) Bluetooth capabilities. This unit is compatible with both non-amplified and analog/digital amplified vehicle models.
Obsah balení
- Axxess GM Data Interface (AX-GMCL2-SWC)
- Vehicle-specific wiring harnesses
- Návod k použití (tento dokument)
Image: The Axxess AX-GMCL2-SWC data interface module (black box) and the accompanying wiring harnesses, including vehicle-specific connectors, RCA cables, and bare wire leads for various connections.
Nastavení a instalace
Installation of the AX-GMCL2-SWC requires careful attention to wiring connections. It is recommended that installation be performed by a qualified professional.
Kompatibilita
This interface is designed for specific GM vehicles manufactured between 2000 and 2013. Verify your vehicle's compatibility before proceeding with installation.
Připojení vodičů
Connect the provided wiring harnesses to your aftermarket head unit and the vehicle's factory wiring. Key connections include:
- Napájení příslušenství: Provides a 12-volt 10-amp accessory output.
- NAV Outputs: Includes outputs for parking brake, reverse, mute, and speed sense signals, essential for navigation-equipped head units.
- Ovládání na volantu (SWC): Connect the SWC wire(s) to your aftermarket radio's steering wheel control input. Refer to your radio's manual for specific wiring.
- Audio připojení: Ensure proper connections for audio signals, including retention of balance and fade.
- Chime Module: The interface integrates with the vehicle's chime system. Adjust chime volume using the potentiometer on the module if available.
Always consult the detailed wiring diagram provided with your specific product packaging for precise color-coded connections.
Počáteční konfigurace
After all connections are made, follow the specific power-up and programming sequence outlined in the product's included quick-start guide to ensure proper communication between the interface and your aftermarket radio. This typically involves turning the ignition on and off in a specific pattern.
Návod k obsluze
Once installed and configured, the AX-GMCL2-SWC enables the following retained features:
- Ovládání na volantu: Operate volume, track/station, mode, and other functions directly from your vehicle's steering wheel buttons.
- Zachovaný výkon příslušenství (RAP): The radio will remain on for a short period after the ignition is turned off, until a door is opened, mimicking factory behavior.
- Vehicle Chimes: All factory warning chimes (e.g., seatbelt, door ajar) will be reproduced through the aftermarket audio system.
- OnStar and OE Bluetooth: If your vehicle is equipped, these features will continue to function through the interface.
- Factory Auxiliary Input: The original auxiliary input, if present, will be retained and accessible through your new head unit.
Údržba
The AX-GMCL2-SWC is designed for long-term reliability and typically requires minimal maintenance. Consider the following:
- Zabezpečená připojení: Periodically check that all wiring connections remain secure and free from corrosion.
- Aktualizace firmwaru: The module is Micro B USB updatable. Check the Axxess website for any available firmware updates that may improve performance or address compatibility issues. Use the official PC software for updates.
- Environmentální faktory: Ensure the module is installed in a dry, stable environment within the vehicle's dashboard, away from excessive heat or moisture.
Odstraňování problémů
If you encounter issues with your AX-GMCL2-SWC, review následující běžné kroky pro řešení problémů:
- Rádio není napájeno:
- Zkontrolujte, zda jsou všechna napájecí a uzemňovací připojení bezpečná.
- Check vehicle fuses.
- Ensure the interface module is properly connected to the vehicle's data bus.
- Ovládací prvky na volantu nefungují:
- Confirm the SWC wire from the interface is correctly connected to the aftermarket radio's SWC input (e.g., 3.5mm jack or specific wire).
- Ensure the interface is programmed for your specific radio brand/model. If auto-detection fails, use the PC software for manual configuration.
- Some steering wheel buttons (e.g., "Source Down" or "OnStar" on older GM models) may not be remappable or supported by all aftermarket radios.
- Žádné zvonkohry nebo nesprávná hlasitost zvonkohry:
- Verify the chime module connections.
- Adjust the potentiometer on the AX-GMCL2-SWC module to set the desired chime volume.
- Dimmer Control Issues:
- Check the dimmer wire connection between the interface and the aftermarket radio.
- Ensure the aftermarket radio's dimmer settings are correctly configured.
- Vehicle System Malfunctions (e.g., Speedometer erratic, vehicle not starting):
- Immediately disconnect the interface and revert to factory wiring if possible.
- These symptoms indicate a serious wiring error or module malfunction. Seek professional assistance.
- Problémy s aktualizací firmwaru:
- Ensure you are using the correct and latest PC software from Axxess.
- Use a reliable USB cable and ensure stable power to the module during updates.
If problems persist after following these steps, contact Axxess technical support for further assistance.
Specifikace
| Rozměry produktu | 9.3 x 4.2 x 2.4 palce |
| Hmotnost položky | 12 unce |
| Číslo modelu | AX-GMCL2-SWC |
| ASIN | B01MG2F61T |
| Výrobce | Petra Industries |
| První dostupný termín | 21. října 2016 |
Záruka a podpora
Informace o záruce
For detailed warranty information regarding the Axxess AX-GMCL2-SWC Data Interface, please refer to the documentation included with your purchase or visit the official Axxess website. Warranty terms and conditions are subject to change by the manufacturer.
Technická podpora
If you require technical assistance or have questions not covered in this manual, please contact Axxess technical support directly. Contact information can typically be found on the manufacturer's official webmístě nebo na obalu produktu.
