Cisco CP-DX80-VESA

Cisco CP-DX80-VESA VESA Adapter and Wall Mount Instruction Manual

Model: CP-DX80-VESA

1. Úvod

This manual provides comprehensive instructions for the installation, operation, and maintenance of your Cisco CP-DX80-VESA VESA Adapter and Wall Mount. Please read this manual thoroughly before installation to ensure correct setup and to prevent damage to the product or connected devices. Retain this manual for future reference.

2. Bezpečnostní informace

Během instalace a používání dodržujte následující bezpečnostní opatření:

3. Obsah balení

Před zahájením instalace ověřte, zda jsou všechny komponenty přítomny:

Cisco CP-DX80-VESA VESA Adapter and Wall Mount

Image: The Cisco CP-DX80-VESA VESA Adapter and Wall Mount. This image displays the primary components of the product, including the adapter plate and the wall mounting bracket, designed to secure a video conferencing system to a wall.

4. Nastavení a instalace

4.1 Potřebné nástroje

4.2 Montáž na stěnu

  1. Vyberte umístění: Choose a suitable wall location, ensuring it can support the weight of the mount and the device. Avoid areas with electrical wires or plumbing.
  2. Označte otvory pro vrtání: Hold the wall mount bracket against the wall at the desired height. Use a level to ensure it is straight. Mark the drill hole locations with a pencil.
  3. Vrtací otvory: Drill pilot holes at the marked locations. Use appropriate drill bits for your wall type (e.g., wood studs, concrete, drywall with anchors).
  4. Bezpečný držák: Insert wall anchors (if required) into the pilot holes. Align the wall mount bracket with the holes and secure it to the wall using the provided screws. Ensure it is firmly attached.

4.3 VESA Adapter Attachment to Device

  1. Identify VESA Pattern: Locate the VESA mounting holes on the back of your Cisco DX80 video conferencing system.
  2. Připojte adaptér: Align the Cisco CP-DX80-VESA adapter with the VESA mounting holes on the DX80 device.
  3. Bezpečný adaptér: Use the appropriate screws from the mounting hardware kit to securely fasten the VESA adapter to the DX80 device. Do not overtighten.

4.4 Mounting the Device to the Wall Bracket

  1. Lift Device: Carefully lift the DX80 device with the attached VESA adapter. It is recommended to have assistance for this step.
  2. Engage Mount: Hook the VESA adapter onto the wall mount bracket. Ensure the adapter is fully seated and engaged with the bracket's locking mechanism.
  3. Zabezpečené zařízení: Depending on the design, there may be additional screws or clips to secure the device to the wall bracket. Fasten these as instructed to prevent accidental dislodging.
  4. Závěrečná kontrola: Gently pull on the mounted device to ensure it is stable and securely attached to the wall.

5. Provozní aspekty

Once the Cisco DX80 is securely mounted using the CP-DX80-VESA adapter and wall mount, its operation remains consistent with its standard functionality. The mount provides a stable platform for the device.

6. Údržba

The Cisco CP-DX80-VESA VESA Adapter and Wall Mount requires minimal maintenance.

7. Řešení problémů

This section addresses common issues related to the installation and stability of the mount.

ProblémMožná příčinaŘešení
Držák se zdá být nestabilní nebo vratký.Loose mounting screws; inadequate wall support; incorrect anchors.Tighten all screws. Verify wall structure and use appropriate anchors. Reinstall if necessary.
Device not attaching correctly to VESA adapter.Incorrect screw size; misalignment.Ensure correct VESA screws are used. Realign the adapter with the device's mounting holes.
Wall mount bracket not level.Chyba při instalaci.Remove bracket, re-mark holes using a level, and reinstall.

8. Specifikace

Key technical specifications for the Cisco CP-DX80-VESA VESA Adapter and Wall Mount:

FunkceDetail
Číslo modeluCP-DX80-VESA
Rozměry produktu10.63 x 16.14 x 3.54 palce
Hmotnost položky2.2 libry
Hardwarové rozhraníEthernet (for connected device)
VýrobceCisco Systems, Inc.
Datum první dostupnosti21. srpna 2015
UPC882658710469

9. Záruka a podpora

For information regarding the product warranty, please refer to the official Cisco warranty documentation provided with your original purchase or visit the Cisco webwebu. Konkrétní záruční podmínky se mohou lišit v závislosti na regionu a produktu.

9.1 Technická podpora

If you encounter issues that cannot be resolved using the troubleshooting guide, or require further assistance, please contact Cisco Technical Support:

When contacting support, please have your product model number (CP-DX80-VESA) and purchase information readily available.

Související dokumenty - CP-DX80-VESA

Předview Průvodce konfigurací partnerů Cisco BroadWorks pro víceplatformové telefony
Komplexní průvodce pro partnery konfigurací telefonů Cisco Multi-Platform Phones (MPP) Series pro interoperabilitu se systémem Cisco BroadWorks, který zahrnuje nastavení, funkce a osvědčené postupy.
Předview Cisco IP 電話 7800および8800シリーズ ファームウェア変換ガイド:エンンタード・ンMPP
Cisco IP電話7800および8800シリーズのエンタープライズファームウェアとマルチプラットフォーム(MPP)ファームウェア間の変換手順を詳述したガイド。C Upgraderや手動移行方法を含み、クラウド移行を支援します。
Předview Průvodce konverzí IP telefonů Cisco: Z podnikového systému na MPP a naopak
Komplexní průvodce převodem telefonů Cisco Unified IP na multiplatformní telefony (MPP) a naopak. Zahrnuje vhodné modely, aktualizace firmwaru, licencování a kroky migrace pro telefony Cisco IP.
Předview Cisco Expressway Deployment Guide for Mobile and Remote Access
Comprehensive deployment guide for configuring Cisco Expressway for Mobile and Remote Access (MRA), enabling secure off-premises connectivity for Cisco Jabber clients and other endpoints. Covers setup, configuration, troubleshooting, and best practices for Cisco Unified Communications environments.
Předview Průvodce konfigurací partnerů Cisco BroadWorks pro víceplatformové telefony
Tato příručka poskytuje podrobné konfigurační postupy pro řadu Cisco Multi-Platform Phones (MPP) pro zajištění bezproblémové interoperability se systémem Cisco BroadWorks a zahrnuje nastavení, funkce a správu zařízení.
Předview Průvodce instalací a konfigurací ethernetového portového adaptéru PA-4E 10BaseT
Tato příručka obsahuje podrobné pokyny pro instalaci a konfiguraci ethernetového portového adaptéru Cisco PA-4E 10BaseT na různých síťových platformách Cisco, včetně přepínačů a routerů Catalyst.