Zavedení
This manual provides essential information for the proper installation, operation, and maintenance of your HMF 49200-02 safe. Please read these instructions carefully before using the product to ensure secure and reliable performance. Keep this manual for future reference.
Přední view of the HMF 49200-02 safe, closed and locked, showing the keyhole and the HMF brand logo.
Bezpečnostní informace
- Always keep the keys in a secure location, separate from the safe itself, and away from unauthorized individuals.
- Do not store the keys inside the safe.
- Ujistěte se, že je trezor bezpečně upevněn, aby se zabránilo jeho neoprávněnému odebrání.
- This safe is designed for securing cash, valuables, and documents. It is not fireproof or waterproof unless explicitly stated.
- Regularly check the locking mechanism for any signs of wear or damage.
Nastavení a instalace
1. Vybalování
Carefully remove the safe from its packaging. Inspect the safe for any signs of damage that may have occurred during transit. Ensure all included components are present: the safe unit, two security keys, fixing screws, and dowels.
The HMF 49200-02 safe with its door open, revealing the interior compartment and the robust locking bolts.
2. Montáž trezoru
The HMF 49200-02 safe is designed for secure wall or floor mounting. Pre-drilled holes are provided for this purpose, and mounting hardware (screws and dowels) is included for a simple and quick installation.
- Vyberte umístění: Select a discreet and secure location for your safe, such as inside a cabinet, closet, or directly on a wall or floor.
- Označte vrtné body: Position the safe in the desired location. Use the pre-drilled holes on the back or bottom of the safe as a template to mark the drilling points on the wall or floor.
- Vrtací otvory: Using an appropriate drill bit for your wall or floor material, drill holes at the marked points.
- Vložte hmoždinky: Insert the provided dowels into the drilled holes.
- Zabezpečení trezoru: Align the safe's holes with the inserted dowels. Use the provided screws to firmly attach the safe to the wall or floor. Ensure the safe is stable and cannot be easily removed.
Zadní view of the HMF 49200-02 safe, highlighting the pre-drilled holes for secure wall or floor mounting.
The HMF 49200-02 safe discreetly placed on a shelf, demonstrating its compact size and suitability for various environments.
Návod k obsluze
1. Odemčení trezoru
- Insert one of the provided security keys into the keyhole on the safe door.
- Otáčejte klíčem ve směru hodinových ručiček (nebo proti směru hodinových ručiček, v závislosti na mechanismu zámku), dokud se zajišťovací šrouby nezatáhnou.
- Otevřete dvířka.
Close-up image of a key inserted into the double-bit key lock of the HMF 49200-02 safe, ready for operation.
Detailní view of the robust three-bolt locking mechanism and the double-bit keyhole on the inside of the safe door.
2. Zamknutí trezoru
- Pevně zavřete dveře trezoru.
- Vložte klíč do klíčové dírky.
- Turn the key counter-clockwise (or clockwise) until the locking bolts extend and secure the door.
- Vyjměte klíč a uložte jej na bezpečném a odděleném místě.
The HMF 49200-02 safe with its door open, displaying various valuables such as a camera lens, a smartphone, and jewelry stored inside.
Údržba
- Čištění: Otřete vnější povrch trezoru měkkým hadříkemamp hadříkem. Nepoužívejte abrazivní čisticí prostředky nebo rozpouštědla, která by mohla poškodit povrchovou úpravu.
- Zamykací mechanismus: Periodically check the lock for smooth operation. If the key feels stiff, a small amount of graphite lubricant can be applied to the key and inserted into the lock. Do not use oil-based lubricants.
- Péče o klíče: Handle keys with care. Avoid bending or damaging them. If a key is lost, contact HMF for assistance.
Odstraňování problémů
Key is difficult to turn or stuck:
- Ujistěte se, že je klíč zcela zasunutý do klíčové dírky.
- Apply a small amount of graphite lubricant to the key and reinsert it.
- Check for any obstructions around the keyhole or door mechanism.
Safe door does not close properly:
- Ensure no items inside the safe are obstructing the door's closure.
- Check if the locking bolts are fully retracted before attempting to close the door.
- Verify that the safe is mounted squarely and the door hinges are not misaligned.
Specifikace
| Značka | HMF |
| Číslo modelu | 49200-02 |
| Vnější rozměry (Š x V x H) | 31 x 20 x 20 cm |
| Vnitřní rozměry (Š x V x H) | 30.6 x 19.6 x 14.2 cm |
| Hmotnost | 4.3 kg |
| Kapacita | 8.5 litrů |
| Materiál | Legovaná ocel |
| Barva | Černý |
| Typ zámku | Double-bit Key Lock |
| Typ montáže | Freestanding / Mountable (Wall or Floor) |
| Zahrnuté komponenty | 2 Security Keys, Fixing Screws, Dowels |
Informace o záruce
For information regarding the product warranty, please refer to the documentation provided at the time of purchase or visit the official HMF webUschovejte si doklad o koupi pro případ reklamace.
Zákaznická podpora
If you encounter any issues or have questions not covered in this manual, please contact HMF customer support. You can usually find contact information on the manufacturer's webmístě nebo na obalu produktu.
HMF Official Webmísto: www.hmf.de
